참고문헌 (39)

1. Architectural Institute of Korea (AIK), Structural Design Code and Commentary of Cold-Formed Steel, AIK, Seoul ; 1999 (in Korean). 

2. Architectural Institute of Japan(AIJ), Recommendations for the Design and Fabrication of Light Weight Steel Structures, AIJ, Tokyo; 1985(in Japanese). 

3. American Iron and Steel Institute(AISI), Specification for the design of cold-formed steel structural members, AISI, USA; 1989. 

4. J Struct Div Winter 82 2 1 1956 10.1061/JSDEAG.0000015 Tests on bolted connections in light gage steel 

   

5. American Iron and Steel Institute(AISI), North American Specification for the Design of Cold Formed Steel Structural Members, AISI S100-16, Washington D.C., USA; 2016. 

6. Eurocode 3, European Committee for Standardization, Design of steel structures, Part 1.3-general rules, supplementary rules for cold formed thin gauge members and sheeting, EN 1993-1-3; 2006. 

7. Australian/New Zealand Standard (AS/NZS), Cold-formed steel structures, AS/NZS 4600, Sydney, Australia ; 2018. 

8. Eng J AISC Birkemoe 15 3 109 1978 10.62913/engj.v15i4.324 Behavior of bearing-critical double-angle beam connections 

   

9. J Constr Steel Res Topkaya 60 11 1615 2004 10.1016/j.jcsr.2004.03.006 Finite element parametric study on block shear failure of steel tension members 

   상세보기

10. J Struct Eng Teh 138 4 459 2012 10.1061/(ASCE)ST.1943-541X.0000478 Block shear capacity of bolted connections in cold-reduced steel sheets 

    상세보기

11. Eng J Am Inst Steel Constr Teh 54 181 2017 Effective shear plane model for tear out and block shear failure of bolted connections 

12. J Struct Eng Elliott 145 2 320 2019 10.1061/(ASCE)ST.1943-541X.0002262 Whitmore tension section and block shear 

    상세보기

13. J Constr Steel Res Elliott 153 320 2019 10.1016/j.jcsr.2018.10.029 Behaviour and strength of bolted connections failing in shear 

    상세보기

14. Thin-Walled Struct Soo Kim 45 4 407 2007 10.1016/j.tws.2007.03.006 Finite element modeling of bolted connections in thin-walled stainless steel plates under static shear 

    상세보기

15. Thin-Walled Struct Kim 46 1 38 2008 10.1016/j.tws.2007.08.009 A parametric study on ultimate strength of single shear bolted connections with curling 

    상세보기

16. Int J Steel Struct Kim 13 1 117 2013 10.1007/s13296-013-1011-z Ultimate strength of single shear two-bolted connections with austenitic stainless steel 

    상세보기

17. Thin-Walled Struct Kim 91 1 2015 10.1016/j.tws.2015.01.016 Experimental investigation on strength and curling influence of bolted connections in thin-walled carbon steel 

    상세보기

18. Structures Mahmood 23 646 2020 10.1016/j.istruc.2019.11.011 Ultimate strength and fracture sequence of bolted connections to thin-walled carbon steel 

    상세보기

19. 10.1007/s13296-018-0320-7 Kim T, Kim M, Cho T. Parametric study on ultimate strength of four-bolted connections with cold-formed carbon steel, Int J Steel Struct. 2018 ; 18(1) : 265-280. 

    상세보기

20. Adv Struct Eng Kim 23 6 1209 2020 10.1177/1369433219891592 Development on ultimate strength equation of ferritic stainless steel (STS430) two-bolted connection 

    상세보기

21. J Constr Steel Res Mai 157 151 2019 10.1016/j.jcsr.2018.11.025 Block shear strength and behaviour of cold-reduced G450 steel bolted connections using DIC 

    상세보기

22. American Iron and Steel Institute (AISI), Cold-Formed Steel Design Manual, AISI, Washington, DC, 2017. 

23. Australia/New Zealand Standards 2018 Cold-formed steel structures, AS/NZS 4600:2018 

24. Eng Struct Jiang 225 111175 2020 10.1016/j.engstruct.2020.111175 Experimental and numerical study of S700 high strength steel double shear bolted connections in tension 

    상세보기

25. Eng Struct dos Santos 231 111707 2021 10.1016/j.engstruct.2020.111707 Testing and design of stainless steel staggered bolted connections 

    상세보기

26. J Constr Steel Res Cho 177 106461 2021 10.1016/j.jcsr.2020.106461 Material ductility and temperature effects on block shear capacity of bolted connections 

    상세보기

27. Korean Design Standard (KDS), Design Specification for Steel Structure in Building, KDS 41 31 00, Korea Construction Standards Center, Seoul, Korea ; 2019(in Korean). 

28. Korean Industrial Standards(KS), Rolled steel for general structure, KS D 3503, Seoul, Korea; 2018 (in Korean). 

29. Korean Industrial Standards(KS), Method of tensile test for metallic materials, KS D 0802, Seoul, Korea ; 2003 (in Korean). 

30. ABAQUS, Ver.2016, Abaqus Analysis User’s Guide. Dassault Systemes Simulia Corp., Providence, RI, USA ; 2016. 

31. American Institute of Steel Construction(AISC), Manual of Steel Construction-Load and Resistance Factor Design, AISC, Chicago, IL, USA; 2016. 

32. Architectural Institute of Japan(AIJ), Recommendation for Limit State Design of Steel Structures, AIJ, Tokyo, Japan ; 2016 (in Japanese). 

33. European Committee for Standardisation (EC3), Design of joints, Eurocode 3 Part 1.8, Chiswick High Road, London, UK ;2006. 

34. Canadian Standards Association(CSA), Design of Steel Structures, CSA-S16-14, Toronto, ON; 2014. 

35. J Constr Steel Res Teh 111 70 2015 10.1016/j.jcsr.2015.04.006 Block shear failure planes of bolted connections-Direct experimental verifications 

    상세보기

36. J Constr Steel Res Može 66 8-9 1000 2010 10.1016/j.jcsr.2010.03.009 High strength steel tension splices with one or two bolts 

    상세보기

37. J Constr Steel Res Može 95 126 2014 10.1016/j.jcsr.2013.12.002 A complete study of bearing stress in single bolt connections 

    상세보기

38. J Constr Steel Res Puthli 57 3 313 2001 10.1016/S0143-974X(00)00017-1 Investigations on bolted connections for high strength steel members 

    상세보기

39. J Constr Steel Res Kamtekar 79 48 2012 10.1016/j.jcsr.2012.07.008 On the bearing strength of bolts in clearance holes 

    상세보기

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.