[논문]Deep learning framework for material design space exploration using active transfer learning and data augmentation

Kim, Yongtae; Kim, Youngsoo; Yang, Charles; Park, Kundo; Gu, Grace X.; Ryu, Seunghwa

doi:10.1038/s41524-021-00609-2

[해외논문] Deep learning framework for material design space exploration using active transfer learning and data augmentation 원문보기

Npj Computational materials, v.7 no.1, 2021년, pp.140 -

Kim, Yongtae , Kim, Youngsoo , Yang, Charles , Park, Kundo , Gu, Grace X. , Ryu, Seunghwa

Abstract ▼ AI-Helper

AbstractNeural network-based generative models have been actively investigated as an inverse design method for finding novel materials in a vast design space. However, the applicability of conventional generative models is limited because they cannot access data outside the range of training sets. Advanced generative models that were devised to overcome the limitation also suffer from the weak predictive power on the unseen domain. In this study, we propose a deep neural network-based forward design approach that enables an efficient search for superior materials far beyond the domain of the initial training set. This approach compensates for the weak predictive power of neural networks on an unseen domain through gradual updates of the neural network with active transfer learning and data augmentation methods. We demonstrate the potential of our framework with a grid composite optimization problem that has an astronomical number of possible design configurations. Results show that our proposed framework can provide excellent designs close to the global optima, even with the addition of a very small dataset corresponding to less than 0.5% of the initial training dataset size.

참고문헌 (60)

Adv. Eng. Mater. F Libonati 18 1354 2016 10.1002/adem.201600143 Libonati, F., Gu, G. X., Qin, Z., Vergani, L. & Buehler, M. J. Bone‐inspired materials by design: toughness amplification observed using 3D printing and testing. Adv. Eng. Mater. 18, 1354-1363 (2016).

상세보기
J. Mech. Phys. Solids O Sigmund 45 1037 1997 10.1016/S0022-5096(96)00114-7 Sigmund, O. & Torquato, S. Design of materials with extreme thermal expansion using a three-phase topology optimization method. J. Mech. Phys. Solids 45, 1037-1067 (1997).

상세보기
Smart Mater. Struct. O Sigmund 8 365 1999 10.1088/0964-1726/8/3/308 Sigmund, O. & Torquato, S. Design of smart composite materials using topology optimization. Smart Mater. Struct. 8, 365 (1999).

상세보기
Compos. Part B: Eng. Y Kim 167 736 2019 10.1016/j.compositesb.2019.03.039 Kim, Y., Kim, Y., Libonati, F. & Ryu, S. Designing tough isotropic structural composite using computation, 3D printing and testing. Compos. Part B: Eng. 167, 736-745 (2019).

상세보기
Bioorg. Med. Chem. A-Y Guan 24 342 2016 10.1016/j.bmc.2015.09.031 Guan, A.-Y., Liu, C.-L., Sun, X.-F., Xie, Y. & Wang, M.-A. Discovery of pyridine-based agrochemicals by using intermediate derivatization methods. Bioorg. Med. Chem. 24, 342-353 (2016).

상세보기
Nat. Commun. H Zhu 10 1 2019 10.1038/s41467-018-07882-8 Zhu, H. et al. Discovery of TaFeSb-based half-Heuslers with high thermoelectric performance. Nat. Commun. 10, 1-8 (2019).

상세보기
Comput. Mech. M Carraturo 64 1589 2019 10.1007/s00466-019-01736-w Carraturo, M. et al. Graded-material design based on phase-field and topology optimization. Comput. Mech. 64, 1589-1600 (2019).

상세보기
Nat. Commun. C-T Chen 11 1 2020 10.1038/s41467-019-13993-7 Chen, C.-T., Chrzan, D. C. & Gu, G. X. Nano-topology optimization for materials design with atom-by-atom control. Nat. Commun. 11, 1-9 (2020).

상세보기
Sci. Adv. AM Holder 3 e1700270 2017 10.1126/sciadv.1700270 Holder, A. M. et al. Novel phase diagram behavior and materials design in heterostructural semiconductor alloys. Sci. Adv. 3, e1700270 (2017).

상세보기
Compos. Struct. Y Kim 220 769 2019 10.1016/j.compstruct.2019.04.017 Kim, Y., Jeong, H., Gu, G. X. & Ryu, S. A three-dimensional fracture pattern diagram of staggered platelet structures. Compos. Struct. 220, 769-775 (2019).

상세보기
Comput. Mater. Sci. A Radman 91 266 2014 10.1016/j.commatsci.2014.04.064 Radman, A., Huang, X. & Xie, Y. Topological design of microstructures of multi-phase materials for maximum stiffness or thermal conductivity. Comput. Mater. Sci. 91, 266-273 (2014).

상세보기
Int. J. Solids Struct. N de Kruijf 44 7092 2007 10.1016/j.ijsolstr.2007.03.028 de Kruijf, N., Zhou, S., Li, Q. & Mai, Y.-W. Topological design of structures and composite materials with multiobjectives. Int. J. Solids Struct. 44, 7092-7109 (2007).

상세보기
Annu. Rev. Mater. Res. M Osanov 46 211 2016 10.1146/annurev-matsci-070115-031826 Osanov, M. & Guest, J. K. Topology optimization for architected materials design. Annu. Rev. Mater. Res. 46, 211-233 (2016).

상세보기
Sci. Technol. Adv. Mater. S Pruksawan 20 1010 2019 10.1080/14686996.2019.1673670 Pruksawan, S., Lambard, G., Samitsu, S., Sodeyama, K. & Naito, M. Prediction and optimization of epoxy adhesive strength from a small dataset through active learning. Sci. Technol. Adv. Mater. 20, 1010-1021 (2019).

상세보기
Drug Discov. Today A Lavecchia 20 318 2015 10.1016/j.drudis.2014.10.012 Lavecchia, A. Machine-learning approaches in drug discovery: methods and applications. Drug Discov. Today 20, 318-331 (2015).

상세보기
Nature KT Butler 559 547 2018 10.1038/s41586-018-0337-2 Butler, K. T., Davies, D. W., Cartwright, H., Isayev, O. & Walsh, A. Machine learning for molecular and materials science. Nature 559, 547-555 (2018).

상세보기
Acta Mater. X Liu 190 105 2020 10.1016/j.actamat.2020.03.016 Liu, X., Athanasiou, C. E., Padture, N. P., Sheldon, B. W. & Gao, H. A machine learning approach to fracture mechanics problems. Acta Mater. 190, 105-112 (2020).

상세보기
Phys. Rev. Res. PZ Hanakata 2 042006 2020 10.1103/PhysRevResearch.2.042006 Hanakata, P. Z., Cubuk, E. D., Campbell, D. K. & Park, H. S. Forward and inverse design of kirigami via supervised autoencoder. Phys. Rev. Res. 2, 042006 (2020).

상세보기
Sci. Rep. G Pilania 3 1 2013 10.1038/srep02810 Pilania, G., Wang, C., Jiang, X., Rajasekaran, S. & Ramprasad, R. Accelerating materials property predictions using machine learning. Sci. Rep. 3, 1-6 (2013).

상세보기
npj Comput. Mater. R Ramprasad 3 1 2017 10.1038/s41524-017-0056-5 Ramprasad, R., Batra, R., Pilania, G., Mannodi-Kanakkithodi, A. & Kim, C. Machine learning in materials informatics: recent applications and prospects. npj Comput. Mater. 3, 1-13 (2017).

상세보기
Adv. Theory Simul. CT Chen 2 1900056 2019 10.1002/adts.201900056 Chen, C. T. & Gu, G. X. Effect of constituent materials on composite performance: exploring design strategies via machine learning. Adv. Theory Simul. 2, 1900056 (2019).

상세보기
Mater. Horiz. GX Gu 5 939 2018 10.1039/C8MH00653A Gu, G. X., Chen, C.-T., Richmond, D. J. & Buehler, M. J. Bioinspired hierarchical composite design using machine learning: simulation, additive manufacturing, and experiment. Mater. Horiz. 5, 939-945 (2018).

상세보기
Extrem. Mech. Lett. GX Gu 18 19 2018 10.1016/j.eml.2017.10.001 Gu, G. X., Chen, C.-T. & Buehler, M. J. De novo composite design based on machine learning algorithm. Extrem. Mech. Lett. 18, 19-28 (2018).

상세보기
ACS Appl. Mater. Inter Y Kim 12 24458 2020 10.1021/acsami.0c04123 Kim, Y., Yang, C., Kim, Y., Gu, G. X. & Ryu, S. Designing an adhesive pillar shape with deep learning-based optimization. ACS Appl. Mater. Inter. 12, 24458-24465 (2020).

상세보기
J. Am. Chem. Soc. A Mansouri Tehrani 140 9844 2018 10.1021/jacs.8b02717 Mansouri Tehrani, A. et al. Machine learning directed search for ultraincompressible, superhard materials. J. Am. Chem. Soc. 140, 9844-9853 (2018).

상세보기
Chem. Sci. J Noh 11 4871 2020 10.1039/D0SC00594K Noh, J., Gu, G. H., Kim, S. & Jung, Y. Machine-enabled inverse design of inorganic solid materials: promises and challenges. Chem. Sci. 11, 4871-4881 (2020).

상세보기
J. Phys. Chem. Lett. JP Janet 9 1064 2018 10.1021/acs.jpclett.8b00170 Janet, J. P., Chan, L. & Kulik, H. J. Accelerating chemical discovery with machine learning: simulated evolution of spin crossover complexes with an artificial neural network. J. Phys. Chem. Lett. 9, 1064-1071 (2018).

상세보기
npj Comput. Mater. W-C Chen 7 1 2021 10.1038/s41524-021-00585-7 Chen, W.-C., Schmidt, J. N., Yan, D., Vohra, Y. K. & Chen, C.-C. Machine learning and evolutionary prediction of superhard BCN compounds. npj Comput. Mater. 7, 1-8 (2021).

상세보기
npj Comput. Mater. P Avery 5 1 2019 10.1038/s41524-019-0226-8 Avery, P. et al. Predicting superhard materials via a machine learning informed evolutionary structure search. npj Comput. Mater. 5, 1-11 (2019).

상세보기
AIAA J. TW Simpson 39 2233 2001 10.2514/2.1234 Simpson, T. W., Mauery, T. M., Korte, J. J. & Mistree, F. Kriging models for global approximation in simulation-based multidisciplinary design optimization. AIAA J. 39, 2233-2241 (2001).

상세보기
J. Aircr. S Jeong 42 413 2005 10.2514/1.6386 Jeong, S., Murayama, M. & Yamamoto, K. Efficient optimization design method using kriging model. J. Aircr. 42, 413-420 (2005).

상세보기
Int. J. Hydrog. Energy Z Li 44 31633 2019 10.1016/j.ijhydene.2019.10.015 Li, Z., Gerdroodbary, M. B., Valipour, P., Moradi, R. & Babazadeh, H. The optimization via response surface method for micro hydrogen gas actuator. Int. J. Hydrog. Energy 44, 31633-31643 (2019).

상세보기
Sci. Adv. J Peurifoy 4 eaar4206 2018 10.1126/sciadv.aar4206 Peurifoy, J. et al. Nanophotonic particle simulation and inverse design using artificial neural networks. Sci. Adv. 4, eaar4206 (2018).

상세보기
Science B Sanchez-Lengeling 361 360 2018 10.1126/science.aat2663 Sanchez-Lengeling, B. & Aspuru-Guzik, A. Inverse molecular design using machine learning: generative models for matter engineering. Science 361, 360-365 (2018).

상세보기
Adv. Sci. CT Chen 7 1902607 2020 10.1002/advs.201902607 Chen, C. T. & Gu, G. X. Generative deep neural networks for inverse materials design using backpropagation and active learning. Adv. Sci. 7, 1902607 (2020).

상세보기
Sci. Adv. B Kim 6 eaax9324 2020 10.1126/sciadv.aax9324 Kim, B., Lee, S. & Kim, J. Inverse design of porous materials using artificial neural networks. Sci. Adv. 6, eaax9324 (2020).

상세보기
Adv. Eng. Mater. Y-C Hsu 23 20201339 2021 10.1002/adem.202001339 Hsu, Y.-C., Yu, C.-H. & Buehler, M. J. Tuning mechanical properties in polycrystalline solids using a deep generative framework. Adv. Eng. Mater. 23, 20201339 (2021).

상세보기
J. Cheminformatics J Lim 10 1 2018 10.1186/s13321-018-0286-7 Lim, J., Ryu, S., Kim, J. W. & Kim, W. Y. Molecular generative model based on conditional variational autoencoder for de novo molecular design. J. Cheminformatics 10, 1-9 (2018).

상세보기
Mater. Des. HT Kollmann 196 109098 2020 10.1016/j.matdes.2020.109098 Kollmann, H. T., Abueidda, D. W., Koric, S., Guleryuz, E. & Sobh, N. A. Deep learning for topology optimization of 2D metamaterials. Mater. Des. 196, 109098 (2020).

상세보기
npj Comput. Mater. K Kim 4 1 2018 10.1038/s41524-018-0128-1 Kim, K. et al. Deep-learning-based inverse design model for intelligent discovery of organic molecules. npj Comput. Mater. 4, 1-7 (2018).

상세보기
Matter J Noh 1 1370 2019 10.1016/j.matt.2019.08.017 Noh, J. et al. Inverse design of solid-state materials via a continuous representation. Matter 1, 1370-1384 (2019).

상세보기
Nat. Mach. Intell. Z Yao 3 76 2021 10.1038/s42256-020-00271-1 Yao, Z. et al. Inverse design of nanoporous crystalline reticular materials with deep generative models. Nat. Mach. Intell. 3, 76-86 (2021).

상세보기
Marcus, G. Deep learning: A critical appraisal. Preprint at https://arxiv.org/abs/1801.00631 (2018).
Martius, G. & Lampert, C. H. Extrapolation and learning equations. Preprint at https://arxiv.org/abs/1610.02995 (2016).
IEEE Control Syst. Mag. E Barnard 12 50 1992 10.1109/37.158898 Barnard, E. & Wessels, L. Extrapolation and interpolation in neural network classifiers. IEEE Control Syst. Mag. 12, 50-53 (1992).

상세보기
10.18653/v1/W18-1005 Mitchell, J., Minervini, P., Stenetorp, P. & Riedel, S. Extrapolation in NLP. Preprint at https://arxiv.org/abs/1805.06648 (2018).
Adv. Neural Inf. Process. Syst. S Greydanus 32 15379 2019 Greydanus, S., Dzamba, M. & Yosinski, J. Hamiltonian neural networks. Adv. Neural Inf. Process. Syst. 32, 15379-15389 (2019).
J. Comput. Phys. Z Long 399 108925 2019 10.1016/j.jcp.2019.108925 Long, Z., Lu, Y. & Dong, B. PDE-Net 2.0: learning PDEs from data with a numeric-symbolic hybrid deep network. J. Comput. Phys. 399, 108925 (2019).

상세보기
Kloss, A., Schaal, S. & Bohg, J. Combining learned and analytical models for predicting action effects. Preprint at https://arxiv.org/abs/1710.04102 (2017).
npj Comput. Mater. T Lookman 5 1 2019 10.1038/s41524-019-0153-8 Lookman, T., Balachandran, P. V., Xue, D. & Yuan, R. Active learning in materials science with emphasis on adaptive sampling using uncertainties for targeted design. npj Comput. Mater. 5, 1-17 (2019).

상세보기
Lopedoto, E. & Weyde, T. In International Conference on Innovative Techniques and Applications of Artificial Intelligence. 159-165 (Springer).
Xu, K. et al. How neural networks extrapolate: from feedforward to graph neural networks. Preprint at https://arxiv.org/abs/2009.11848 (2020).
Stat. Comput. G Hooker 22 237 2012 10.1007/s11222-010-9220-1 Hooker, G. & Rosset, S. Prediction-based regularization using data augmented regression. Stat. Comput. 22, 237-249 (2012).

상세보기
10.1007/978-3-319-46493-0_38 He, K., Zhang, X., Ren, S. & Sun, J. In European conference on computer vision. 630-645 (Springer, 2016).
He, K., Zhang, X., Ren, S. & Sun, J. In Proceedings of the IEEE conference on computer vision and pattern recognition. 770-778 (Springer, 2016).
Proc. Natl Acad. Sci. M Mozaffar 116 26414 2019 10.1073/pnas.1911815116 Mozaffar, M. et al. Deep learning predicts path-dependent plasticity. Proc. Natl Acad. Sci. 116, 26414-26420 (2019).

상세보기
Int. J. Plasticity DW Abueidda 136 102852 2021 10.1016/j.ijplas.2020.102852 Abueidda, D. W., Koric, S., Sobh, N. A. & Sehitoglu, H. Deep learning for plasticity and thermo-viscoplasticity. Int. J. Plasticity 136, 102852 (2021).

상세보기
10.1088/1755-1315/252/2/022095 Li, L. & Ma, C. In IOP Conference Series: Earth and Environmental Science. 022095 (2019).

상세보기
J. Sci. Comput. R Campagna 88 1 2021 10.1007/s10915-021-01526-8 Campagna, R. & Perracchione, E. Data-driven extrapolation via feature augmentation based on variably scaled thin plates plines. J. Sci. Comput. 88, 1-15 (2021).

상세보기
Comput. Mater. Sci. H Jeong 155 483 2018 10.1016/j.commatsci.2018.09.021 Jeong, H., Signetti, S., Han, T.-S. & Ryu, S. Phase field modeling of crack propagation under combined shear and tensile loading with hybrid formulation. Comput. Mater. Sci. 155, 483-492 (2018).

상세보기

LOADING...

활용도 분석정보

상세보기

다운로드

내보내기

활용도 Top5 논문

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.

표제어: PCR

동의어: Packet Collision Rate

용어 설명 출처 목록 (6)

용어 설명: PCR은 세균 특이성이 있는 primer를 이용하여 적은 수의 세균이 있을지라도 쉽게 검출할 수 있는 유용한 방법이며, 이를 이용하여 구강 내 치면세균막이나 타액에서 직접 세균을 검출할 수 있게 되었다[8].

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증