참고문헌 (52)

1. Acta Mater. Herzog 117 371 2016 10.1016/j.actamat.2016.07.019 Additive manufacturing of metals 

   상세보기

2. Ann. Rev. Mater. Res. Lewandowski 46 151 2016 10.1146/annurev-matsci-070115-032024 Metal additive manufacturing: a review of mechanical properties 

   상세보기

3. J. Mater. Sci. Technol. Murr 28 1 2012 10.1016/S1005-0302(12)60016-4 Metal fabrication by additive manufacturing using laser and electron beam melting technologies 

   상세보기

4. J. Mater. Res. Hofmann 29 1899 2014 10.1557/jmr.2014.208 Compositionally graded metals: a new frontier of additive manufacturing 

   상세보기

5. Mater. Today Liu 21 354 2018 10.1016/j.mattod.2017.11.004 Dislocation network in additive manufactured steel breaks strength-ductility trade-off 

   상세보기

6. Acta Mater. Kürnsteiner 129 52 2017 10.1016/j.actamat.2017.02.069 Massive nanoprecipitation in and Fe-19Ni-xAl maraging steel triggered by the intrinsic heat treatment during laser metal deposition 

   상세보기

7. Materialia Zhao 13 2020 10.1016/j.mtla.2020.100835 A new high-throughput method using additive manufacturing for alloy design and heat treatment optimization 

   상세보기

8. Mater. Sci. Eng. A Kim 773 2020 10.1016/j.msea.2019.138726 Nano-scale solute heterogeneities in the ultrastrong selectively laser melted carbon-doped CoCrFeMnNi alloy 

   상세보기

9. Acta Mater. Wang 110 226 2016 10.1016/j.actamat.2016.03.019 Effect of processing parameters on microstructure and tensile properties of austenitic stainless steel 304L made by directed energy deposition additive manufacturing 

   상세보기

10. Nat. Mater. Wang 17 63 2018 10.1038/nmat5021 Additively manufactured hierarchical stainless steels with high strength and ductility 

    상세보기

11. Prog. Struct. Eng. Mater. Gardner 7 45 2005 10.1002/pse.190 The use of stainless steel in structures 

    상세보기

12. Metall. Trans. A Schramm 6 1345 1975 10.1007/BF02641927 Stacking fault energies of seven commercial austenitic stainless steels 

    상세보기

13. Addit. Manuf. Zhu 35 2020 Enhanced strength-ductility synergy and transformation-induced plasticity of the selective laser melting fabricated 304L stainless steel 

14. Corros. Sci. Melia 152 20 2019 10.1016/j.corsci.2019.02.029 Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing 

    상세보기

15. Mater. Des. de Lima 55 526 2014 10.1016/j.matdes.2013.10.016 Microstructure and mechanical behavior of laser additive manufactured AISI 316 stainless steel stringers 

    상세보기

16. Mater. Sci. Eng. A Kim 356 390 2003 10.1016/S0921-5093(03)00152-7 Dissolution kinetics of delta ferrite in AISI 304 stainless steel produced by strip casting process 

    상세보기

17. Int. J. Press. Vessels Pip. Shojaati 188 2020 10.1016/j.ijpvp.2020.104205 The heat affected zone of X20Cr13 martensitic stainless steel after multiple repair welding: microstructure and mechanical properties assessment 

    상세보기

18. Mater. Sci. Technol. Fu 24 941 2008 10.1179/174328408X295962 Effect of cooling rate on solidification microstructures in AISI 304 stainless steel 

    상세보기

19. Metall. Mater. Trans. A Wang 51 2998 2020 10.1007/s11661-020-05717-0 δ-Ferrite formation and its effect on the mechanical properties of heavy-section AISI 316 stainless steel casting 

    상세보기

20. Mater. Lett. Zhu 293 2021 10.1016/j.matlet.2021.129579 Additively manufactured δ-ferrite-free 410 stainless steel with desirable performance 

    상세보기

21. Mater. Sci. Eng. A Vorontsov 820 2021 10.1016/j.msea.2021.141519 The microstructure, phase composition and tensile properties of austenitic stainless steel in a wire-feed electron beam melting combined with ultrasonic vibration 

    상세보기

22. Int. J. Fatigue Nezhadfar 123 168 2019 10.1016/j.ijfatigue.2019.02.015 Fatigue crack growth behavior of additively manufactured 17-4 PH stainless steel: effects of build orientation and microstructure 

    상세보기

23. Corros. Sci. Melia 152 20 2019 10.1016/j.corsci.2019.02.029 Corrosion properties of 304L stainless steel made by directed energy deposition additive manufacturing 

    상세보기

24. Met. Mater. Int. Kim 27 2614 2021 10.1007/s12540-021-00991-y Effects of cell network structure on the strength of additively manufactured stainless steels 

    상세보기

25. Mater. Charact. Godec 160 2020 10.1016/j.matchar.2019.110074 Quantitative multiscale correlative microstructure analysis of additive manufacturing of stainless steel 316L processed by selective laser melting 

    상세보기

26. Mater. Res. Lett. Wu 2 185 2014 10.1080/21663831.2014.935821 Synergetic strengthening by gradient structure 

    상세보기

27. J. Met. Mater. Yoon 54 231 2016 10.3365/KJMM.2016.54.4.231 Obtaining reliable true plastic stress-strain curves in a wide range of strains using digital image correlation in tensile testing, Korean 

    상세보기

28. Addit. Manuf. Ghayoor 32 2020 Selective laser melting of 304L stainless steel: role of volumetric energy density on the microstructure, texture and mechanical properties 

29. Mater. Sci. Eng. A Smith 765 2019 10.1016/j.msea.2019.138268 Relationship between manufacturing defects and fatigue properties of additive manufactured austenitic stainless steel 

    상세보기

30. J. Manuf. Process. Hung 45 438 2019 10.1016/j.jmapro.2019.07.030 Enhanced mechanical properties for 304L stainless steel parts fabricated by laser-foil-printing additive manufacturing 

    상세보기

31. Mater. Sci. Eng. A Huang 758 60 2019 10.1016/j.msea.2019.04.108 Mechanical properties of 304 austenite stainless steel manufactured by laser metal deposition 

    상세보기

32. Scr. Mater. Kumar 202 2021 10.1016/j.scriptamat.2021.114002 Fracture toughness of 304L austenitic stainless steel produced by laser powder bed fusion 

    상세보기

33. Acta Mater. Smith 164 728 2019 10.1016/j.actamat.2018.11.021 Strengthening mechanisms in directed energy deposited austenitic stainless steel 

    상세보기

34. J. Mater. Sci. Smith 56 1 2021 10.1007/s10853-020-05232-y Microstructural development in DED stainless steels: applying welding models to elucidate the impact of processing and alloy composition 

    상세보기

35. Mater. Lett. Fu 93 18 2013 10.1016/j.matlet.2012.11.035 Solidification behavior in three-phase region of AISI 304 stainless steel 

    상세보기

36. Mater. Sci. Eng. A Kim 356 390 2003 10.1016/S0921-5093(03)00152-7 Dissolution kinetics of delta ferrite in AISI 304 stainless steel produced by strip casting process 

    상세보기

37. J. Mater. Res. Technol. Cristobal 7 450 2018 10.1016/j.jmrt.2017.12.001 Rapid fabrication and characterization of AISI 304 stainless steels modified with Cu additions by additive alloy melting (ADAM) 

    상세보기

38. Mater. Des. Bertoli 135 385 2017 10.1016/j.matdes.2017.09.044 In-situ characterization of laser-powder interaction and cooling rates through high-speed imaging of powder bed fusion additive manufacturing 

    상세보기

39. Mater. Des. Sun 104 197 2016 10.1016/j.matdes.2016.05.035 Selective laser melting of stainless steel 316L with low porosity and high build rates 

    상세보기

40. npj Comput. Mater. Jung 3 21 2017 10.1038/s41524-017-0023-1 Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energy 

    상세보기

41. Acta Mater. Rahman 89 247 2015 10.1016/j.actamat.2015.02.008 The effect of grain size on the twin initiation stress in a TWIP steel 

    상세보기

42. Acta Mater. Bae 161 388 2018 10.1016/j.actamat.2018.09.057 Exceptional phase-transformation strengthening of ferrous medium-entropy alloys at cryogenic temperatures 

    상세보기

43. NPG Asia Mater. Sun 10 127 2018 10.1038/s41427-018-0018-5 Simultaneously enhanced strength and ductility for 3D-printed stainless steel 316L by selective laser melting 

    상세보기

44. Trans. AIME Fullman 197 447 1954 Measurement of particle sizes in opaque bodies 

45. Scr. Mater. Chen 56 673 2007 10.1016/j.scriptamat.2006.12.021 Sympathetic nucleation of austenite in a Fe-22Cr-5Ni duplex stainless steel 

    상세보기

46. ISIJ Int. Fukumoto 40 677 2000 10.2355/isijinternational.40.677 Crystallographic relationships between δ-Ferrite and γ-Austenite during unidirectional solidification of Fe-Cr-Ni alloys 

    상세보기

47. J. Mater. Chem. B Zhu 7 6224 2019 10.1039/C9TB01503E Coral-shaped Au nanostructures for selective apoptosis induction during photothermal therapy 

    상세보기

48. Scr. Mater. Zhu 154 20 2018 10.1016/j.scriptamat.2018.05.015 Hierarchical microstructure and strengthening mechanisms of a CoCrFeNiMn high entropy alloy additively manufactured by selective laser melting 

    상세보기

49. Scr. Mater. Wang 150 22 2018 10.1016/j.scriptamat.2018.02.039 Quantifying the synergetic strengthening in gradient material 

    상세보기

50. Addit. Manuf. Park 35 2020 Synergetic strengthening of additively manufactured (CoCrFeMnNi)99C1 high-entropy alloy by heterogeneous anisotropic microstructure 

51. Acta Metall. Mater. Kashyap 43 3971 1995 10.1016/0956-7151(95)00110-H On the Hall-Petch relationship and substructural evolution in type 316L stainless steel 

    상세보기

52. Metall. Mater. Trans. B Antolovich 2 2135 1971 10.1007/BF02917542 On the toughness increment associated with the austenite to martensite phase transformation in TRIP steels 

    상세보기

활용도 Top5 논문

더보기

해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.