최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기한국세라믹학회지 = Journal of the Korean Ceramic Society, v.61 no.1, 2024년, pp.161 - 169
Jeong, Young-Seok , Jang, Min-Ho , Kim, Jung-Won , Choi, Kyoon , Yoon, Ho Gyu
초록이 없습니다.
J. mater. sci. technol. P Wang 35 2743 2019 10.1016/j.jmst.2019.07.020 P. Wang, F. Liu, H. Wang, H. Li, Y. Gou, A review of third generation SiC fibers and SiCf/SiC composites. J. mater. sci. technol. 35, 2743-2750 (2019). https://doi.org/10.1016/j.jmst.2019.07.020
Appl. Therm. Eng. D Wei 199 2021 10.1016/j.applthermaleng.2021.117614 D. Wei, L. Lei, J. Yinghou, W. Sontao, L. Xingchen, B. Sunden, Heat transfer in the trailing region of gas turbines - A state-of-the-art review. Appl. Therm. Eng. 199, 117614 (2021). https://doi.org/10.1016/j.applthermaleng.2021.117614
IOP Conf Ser Mater Sci Eng M Chen 678 012043 2019 10.1088/1757-899X/678/1/012043 M. Chen, H. Qiu, W. Xie, B. Zhang, S. Liu, W. Luo, X. Ma, Research progress of continuous fiber reinforced ceramic matrix composite in hot section components of aero engine. IOP Conf Ser Mater Sci Eng 678, 012043 (2019). https://doi.org/10.1088/1757-899X/678/1/012043
J. Am. Ceram. PG Karandikar 76 1720 1993 10.1111/j.1151-2916.1993.tb06640.x P.G. Karandikar, T.-W. Chou, Damage Development and Moduli Reductions in Nicalon-Calcium Aluminosilicate Composites under Static Fatigue and Cyclic Fatigue. J. Am. Ceram. 76, 1720-1728 (1993). https://doi.org/10.1111/j.1151-2916.1993.tb06640.x
J. Mater. Sci. AG Evans 29 3857 1994 10.1007/BF00355946 A.G. Evans, F.W. Zok, The physics and mechanics of fibre-reinforced brittle matrix composites. J. Mater. Sci. 29, 3857-3896 (1994). https://doi.org/10.1007/BF00355946
Compos. B Eng. JD Arregui-Mena 238 2022 10.1016/j.compositesb.2022.109896 J.D. Arregui-Mena, T. Koyanagi, E. Cakmak, C.M. Petrie, W.-J. Kim, D.J. Kim, C.P. Deck, C. Sauder, J. Braun, Y. Katoh, Qualitative and quantitative analysis of neutron irradiation effects in SiC/SiC composites using X-ray computed tomography. Compos. B Eng. 238, 109896 (2022). https://doi.org/10.1016/j.compositesb.2022.109896
Mater. Sci. Eng. C W Yang 345 28 2003 10.1016/S0921-5093(02)00468-9 W. Yang, T. Noda, H. Araki, J. Yu, A. Kohyama, Mechanical properties of several advanced Tyranno-SA fiber-reinforced CVI-SiC matrix composites. Mater. Sci. Eng. C 345, 28-35 (2003). https://doi.org/10.1016/S0921-5093(02)00468-9
Mater. Des. SY Kim 44 107 2013 10.1016/j.matdes.2012.07.064 S.Y. Kim, I.S. Han, S.K. Woo, K.S. Lee, D.K. Kim, Wear-mechanical properties of filler-added liquid silicon infiltration C/C-SiC composites. Mater. Des. 44, 107-113 (2013). https://doi.org/10.1016/j.matdes.2012.07.064
10.1007/s43207-022-00260-7 J. W. Han, D. J. Kim, S.-Y. KIM, W.-J. Kim, C. Park, J. Y. Park, Influence of CVI process time on the C-ring strength of hybrid SiCf/SiC composites fabricated by CVI-LSI. J Korean Ceram. 60 261-271 (2023). https://doi.org/10.1007/s43207-022-00260-7
J. Korean Ceram. Soc. K-M Kim 55 392 2018 10.4191/kcers.2018.55.4.11 K.-M. Kim, Y.S. Hahn, S.-M. Lee, K. Choi, J.-H. Lee, Mechanical properties of Cf/SiC composite using a combined process of chemical vapor infiltration and precursor infiltration pyrolysis. J. Korean Ceram. Soc. 55, 392-399 (2018). https://doi.org/10.4191/kcers.2018.55.4.11
J. Korean Ceram. Soc. YS Jeong 56 291 2019 10.4191/kcers.2019.56.3.09 Y.S. Jeong, K. Choi, H.G. Yoon, Microstructural control of pyrolytic carbon layer deposited from methane by isotropic chemical vapor infiltration. J. Korean Ceram. Soc. 56, 291-297 (2019). https://doi.org/10.4191/kcers.2019.56.3.09
Compos. B Eng. N Orlovskaya 37 524 2006 10.1016/j.compositesb.2006.02.022 N. Orlovskaya, M. Lugovy, F. Ko, S. Yarmolenko, J. Sankar, J. Kuebler, SiC/SiCwf Laminates: design, manufacturing, mechanical PROPERTIES. Compos. B Eng. 37, 524-529 (2006). https://doi.org/10.1016/j.compositesb.2006.02.022
Int. J. Nanotechnol. KM Kim 15 555 2018 10.1504/IJNT.2018.096346 K.M. Kim, J.-W. Seo, K. Choi, Improvement of densification uniformity of carbon/silicon carbide composites during chemical vapour infiltration. Int. J. Nanotechnol. 15, 555-567 (2018). https://doi.org/10.1504/IJNT.2018.096346
J. Korean Ceram. J-W Seo 58 184 2021 10.1007/s43207-020-00082-5 J.-W. Seo, K. Choi, Application of CFD simulation to silicon carbide deposition for nozzles with funnel. J. Korean Ceram. 58, 184-191 (2021). https://doi.org/10.1007/s43207-020-00082-5
J. Korean Inst. Surf. Eng. J-M Koo 50 523 2017 10.5695/JKISE.2017.50.6.523 J.-M. Koo, K.H. Kim, Y.S. Han, Fabrication and characterization of Cf/SiC composite with bn interphase coated by wet chemical process. J. Korean Inst. Surf. Eng. 50, 523-530 (2017). https://doi.org/10.5695/JKISE.2017.50.6.523
10.32908/hthp.v50.1139 K. H. Kim, K. Choi, Y. S. Han, S. Nahm, S.-M. Lee, High-temperature cyclic fatigue in air of SiCf/SiC ceramic matrix composite with a pyrolytic carbon interface. HTHP. 50, 325-334 (2021). https://doi.org/10.32908/hthp.v50.1139
Ceram. Int. R Liu 47 26971 2021 10.1016/j.ceramint.2021.06.110 R. Liu, F. Wang, J. Zhang, J. Chen, F. Wan, Y. Wang, Effects of CVI SiC amount and deposition rates on properties of SiCf/SiC composites fabricated by hybrid chemical vapor infiltration (CVI) and precursor infiltration and pyrolysis (PIP) routes. Ceram. Int. 47, 26971-26977 (2021). https://doi.org/10.1016/j.ceramint.2021.06.110
J. Mater. Res. JC Margiotta 23 1237 2008 10.1557/JMR.2008.0167 J.C. Margiotta, D. Zhang, D.C. Nagle, C.E. Feeser, Formation of dense silicon carbide by liquid silicon infiltration of carbon with engineered structure. J. Mater. Res. 23, 1237-1248 (2008). https://doi.org/10.1557/JMR.2008.0167
J. Korean Cryst. Growth Cryst. Technol. YJ Joo 30 271 2020 10.6111/JKCGCT.2020.30.6.271 Y.J. Joo, S.H. Joo, C.K. Youn, Effect of pyrolysis temperature and pressing load on the densification of amorphous silicon carbide block. J. Korean Cryst. Growth Cryst. Technol. 30, 271-276 (2020). https://doi.org/10.6111/JKCGCT.2020.30.6.271
Compos. Part A Appl. TJ Pirzada 140 2021 10.1016/j.compositesa.2020.106197 T.J. Pirzada, S. Singh, R.D. Meyere, P. Earp, M. Galano, T.J. Marrow, Effects of polymer infiltration processing (PIP) temperature on the mechanical and thermal properties of Nextel 312 fibre SiCO ceramic matrix composites. Compos. Part A Appl. 140, 106197 (2021). https://doi.org/10.1016/j.compositesa.2020.106197
Carbon P Toth 178 688 2021 10.1016/j.carbon.2021.03.043 P. Toth, Nanostructure quantification of turbostratic carbon by HRTEM image analysis: State of the art, biases, sensitivity and best practices. Carbon 178, 688-707 (2021). https://doi.org/10.1016/j.carbon.2021.03.043
Solid State Sci. P Ruz 62 105 2016 10.1016/j.solidstatesciences.2016.10.017 P. Ruz, S. Banerjee, M. Pandey, V. Sudarsan, P.U. Sastry, R.J. Kshirsagar, Structural evolution of turbostratic carbon: Implications in H2 storage. Solid State Sci. 62, 105-111 (2016). https://doi.org/10.1016/j.solidstatesciences.2016.10.017
J. Nanosci. Nanotechnol. R Liu 14 1647 2014 10.1166/jnn.2014.8905 R. Liu, Y. Chi, L. Fang, Z. Tang, Z. Tang, Synthesis of Carbon Nanowall by Plasma-Enhanced Chemical Vapor Deposition Method. J. Nanosci. Nanotechnol. 14, 1647-1657 (2014). https://doi.org/10.1166/jnn.2014.8905
10.1016/j.carbon.2008.10.003 P. J. Meadows, E. L. Honorato, P. Xiao, Fluidized Bed Chemical Vapor Deposition of Pyrolytic Carbon - II. Effect of Deposition Conditions on Anisotropy. Carbon 47, 251-62 (2009). https://doi.org/10.1016/j.carbon.2008.10.003
Carbon M Seyring 116 347 2017 10.1016/j.carbon.2017.01.107 M. Seyring, A. Simon, I. Voigt, U. Ritter, M. Rettenmayr, Quantitative crystallographic analysis of individual carbon nanofibers using high resolution transmission electron microscopy and electron diffraction. Carbon 116, 347-355 (2017). https://doi.org/10.1016/j.carbon.2017.01.107
Bull. Chem. Soc. Jpn K Kamei 93 1603 2020 10.1246/bcsj.20200232 K. Kamei, T. Shimizu, K. Harano, E. Nakamura, Aryl radical addition to curvatures of carbon nanohorns for single-molecule-level molecular imaging. Bull. Chem. Soc. Jpn 93, 1603-1608 (2020). https://doi.org/10.1246/bcsj.20200232
Carbon J Kabel 182 571 2021 10.1016/j.carbon.2021.06.045 J. Kabel, T.E.J. Edwards, A. Sharama, J. Michler, P. Hosemann, Direct observation of the elasticity-texture relationship in pyrolytic carbon via in situ micropillar compression and digital image correlation. Carbon 182, 571-584 (2021). https://doi.org/10.1016/j.carbon.2021.06.045
Combust. Flame P Toth 160 909 2013 10.1016/j.combustflame.2013.01.002 P. Toth, A.B. Palotas, E.G. Eddings, R.T. Whitaker, J.S. Lighty, A novel framework for the quantitative analysis of high resolution transmission electron micrographs of soot I. Improved measurement of interlayer spacing. Combust. Flame 160, 909-919 (2013). https://doi.org/10.1016/j.combustflame.2013.01.002
10.1016/j.combustflame.2011.01.009 K. Yehliu, R. L. Vander Wal, A. L. Boehman, Development of an HRTEM image analysis method to quantify carbon nanostructure. Combust. Flame 158, 1837-1851 (2011). https://doi.org/10.1016/j.combustflame.2011.01.009
Energy Fuels CA Wang 30 2694 2016 10.1021/acs.energyfuels.5b02907 C.A. Wang, T. Huddle, E.H. Lester, J.P. Mathews, Quantifying curvature in high-resolution transmission electron microscopy lattice fringe micrographs of coals. Energy Fuels 30, 2694-2704 (2016). https://doi.org/10.1021/acs.energyfuels.5b02907
Procedia Struct. Integr. JM Parente 5 282 2020 10.1016/j.prostr.2020.04.033 J.M. Parente, P. Santos, S. Valvez, M.P. Silva, P.N.B. Reis, Fatigue behaviour of graphene composites: an overview. Procedia Struct. Integr. 5, 282-293 (2020). https://doi.org/10.1016/j.prostr.2020.04.033
J. Am. Ceram. C Droillard 79 849 1996 10.1111/j.1151-2916.1996.tb08516.x C. Droillard, J. Lamon, Fracture toughness of 2-D Woven SiC/SiC CVI-composites with multilayered interphases. J. Am. Ceram. 79, 849-858 (1996). https://doi.org/10.1111/j.1151-2916.1996.tb08516.x
Acta Mater. F Rebillat 48 4609 2000 10.1016/S1359-6454(00)00247-0 F. Rebillat, J. Lamon, The concept of a strong interface applied to SiC/SiC composites with a BN interphase. Acta Mater. 48, 4609-4618 (2000). https://doi.org/10.1016/S1359-6454(00)00247-0
Mater. Y Zhou 25 679 2019 10.3390/ma12040679 Y. Zhou, T. Ye, L. Ma, Z. Lu, Z. Yang, S. Liu, Investigation on Cf/PyC interfacial properties of C/C composites by the molecular dynamics simulation method. Mater. 25, 679 (2019). https://doi.org/10.3390/ma12040679
J. Eur. Ceram. RK Goldberg 42 6846 2022 10.1016/j.jeurceramsoc.2022.07.042 R.K. Goldberg, A.S. Almansour, R.M. Sullivan, Analytical simulation of effects of local mechanisms on tensile response of ceramic matrix minicomposites. J. Eur. Ceram. 42, 6846-6864 (2022). https://doi.org/10.1016/j.jeurceramsoc.2022.07.042
High Temp. Mater. Process. L Li 39 0052 2020 10.1515/htmp-2020-0052 L. Li, Temperature-dependent proportional limit stress of SiC/SiC fiber-reinforced ceramic-matrix composites. High Temp. Mater. Process. 39, 0052 (2020). https://doi.org/10.1515/htmp-2020-0052
Rev. Sci. Instrum. A Haboub 85 2014 10.1063/1.4892437 A. Haboub, H.A. Bale, J.R. Nasiatka, B.N. Cox, D.B. Marshall, R.O. Ritchie, A.A. MacDowell, Tensile testing of materials at high temperatures above 1700 °C with in-situ synchrotron X-ray micro-tomography. Rev. Sci. Instrum. 85, 083702 (2014). https://doi.org/10.1063/1.4892437
J. Eur. Ceram. K Shimoda 41 1163 2021 10.1016/j.jeurceramsoc.2020.09.024 K. Shimoda, T. Hinoki, Effects of fiber volume fraction on the densification and mechanical properties of unidirectional SiCf/SiC-matrix composites. J. Eur. Ceram. 41, 1163-1170 (2021). https://doi.org/10.1016/j.jeurceramsoc.2020.09.024
Nat. Mater. HA Bale 12 40 2013 10.1038/nmat3497 H.A. Bale, A. Haboub, A.A. MacDowell, J.R. Nasiatka, D.Y. Parkinson, B.N. Cox, D.B. Marshall, R.O. Ritchie, Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600°C. Nat. Mater. 12, 40-46 (2013). https://doi.org/10.1038/nmat3497
J. Korean Ceram. JY Park 58 718 2021 10.1007/s43207-021-00146-0 J.Y. Park, D.J. Kim, H.G. Lee, W.-J. Kim, Fabrication and evaluation of C-ring strength of SiCf/SiC composites tube. J. Korean Ceram. 58, 718-727 (2021). https://doi.org/10.1007/s43207-021-00146-0
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.