다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Medical engineering & physics, v.24 no.6, 2002년, pp.441 - 448
Ha, D (Corresponding author) , Bertocci, G (Department of Rehabilitation Science and Technology, University of Pittsburgh, 5055 Forbes Tower, Pittsburg, PA 15260, USA) , Karg, P (Department of Rehabilitation Science and Technology, University of Pittsburgh, 5055 Forbes Tower, Pittsburg, PA 15260, USA) , Deemer, E (Department of Rehabilitation Science and Technology, University of Pittsburgh, 5055 Forbes Tower, Pittsburg, PA 15260, USA)
AI-Helper
AbstractMany wheelchairs are used as vehicle seats by those who cannot transfer to a vehicle seat. Although ANSI/RESNA WC-19 has been recently adopted as a standard to evaluate crashworthiness of the wheelchairs used as motor vehicle seats, replacement or after-market seats may not be tested to this...
1991 Americans with disabilities act handbook
LaPlante 1993 State estimates of disability in America: disability statistics report
NHTSA. FMVSS 207, Seating Systems. NHTSA, vol. 49 CFR 571-207; 1993.
NHTSA. FMVSS 208, Occupant Crash Protection. NHTSA, vol. 49 CFR 571-208; 1993.
ANSI/RESNA subcommittee on wheelchairs and transportation (SOWHAT). WC-19: Wheeled mobility devices for use in motor vehicles, ANSI/RESNA; 1999 September.
Shutrump S. Survey of wheelchair seating systems; 1995.
1992 Summary of safety issues related to FMVSS No. 207: seating systems
10.4271/930349 Thomson RW, Romilly DP, Navin FPD, Macnabb MJ. Dynamic Requirements of Automobile Seatbacks. SAE; 1993, SAE Paper No. 930349.
Saczalski 1989 Environmental research and safety technology: comment
Rake 1989 Seat systems as restraints and manufacturers liability for deffective design
IEEE Trans Rehabil Eng Bertocci 7 2 234 1999 10.1109/86.769414 Computer simulation and sled test validation of a powerbase wheelchair and occupant subjected to frontal crash conditions
IEEE Trans Rehabil Eng Bertocci 4 3 171 1996 10.1109/86.536772 Development of transportable wheelchair design criteria using computer crash simulation
J Rehabil Res Dev Bertocci 37 5 565 2000 Development of frontal impact carshworthy wheelchair seating design criteria using computer simulation
ISO. International standard, wheelchairs-part 7: measurement of seating and wheel dimensions. International Organization for Standardization; 1998. ISO 7176-7.
10.4271/902328 Viano DC, Arepally S. Assessing the safety performance of occupant restraint systems. Society of Automotive Engineers (SAE); 1990, SAE Paper No. 902328.
10.4271/791004 Adomeit D. Seat design-a significant factor for safety belt effectiveness. Society of Automotive Engineers (SAE); 1979, SAE Paper No. 791004.
J Rehabil Res Dev Ha 37 5 555 2000 Evaluation of wheelchair seating system crashworthiness: combination wheelchair seat back surfaces and attachment hardware
Med Eng Phy Bertocci 23 249 2001 10.1016/S1350-4533(00)00083-7 Evaluation of wheelchair drop seat crashworthiness
Bertocci 417 2000 Effect of wheelchair seating stiffness on occupant crash kinematics and submarining risk using computer simulation
Gu 1996 Optimisation of wheelchair tiedown and occupant restraint system
Collins 1993 Failure of materials in mechanical design: analysis, prediction, prevention
(SOWHAT) ANSI/RESNA. Wheelchair dynamic strength test protocol development and seat insert evaluation sled test report: Greg Shaw-University of Virginia Auto Safety Lab; 1996 August.
van Roosmalen L. Sled impact test #UP0001. University of Michigan Transportation Research Institute (UMTRI); 2000.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.