다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Wear: An international journal on the science and technology of friction, lubrication and wear, v.255 no.1/6, 2003년, pp.195 - 205
Tan, K.S (Surface Engineering and Tribology Group, School of Engineering Sciences, University of Southampton, Highfield, Southampton SO17 1BJ, UK) , Wood, R.J.K (Surface Engineering and Tribology Group, School of Engineering Sciences, University of Southampton, Highfield, Southampton SO17 1BJ, UK) , Stokes, K.R (Defence Science and Technology Laboratory (Dstl), Ministry of Defence, Ively Road, Farnborough, Hampshire GU14 0LX, UK)
AI-Helper
AbstractThis paper investigates the erosion aspects of a novel high velocity oxy-fuel (HVOF) sprayed aluminium bronze coating under sand particle impingement conditions, using a free-jet impingement erosion rig. Erodents at various kinetic energies (0.1–0.8μJ) and impingement angles (3...
10.1016/0261-3069(92)90241-9 I.M. Hutchings, Tribology-friction and wear of engineering materials, Arnold, Pans, 1992.
Wear Alam 248 75 2001 10.1016/S0043-1648(00)00520-2 Friction and wear characteristics of aluminium bronze coatings on steel substrates sprayed by a low pressure plasma technique
Indust. Lub. Tribol. Harvey 48 2 11 1996 10.1108/00368799610781230 The tough truth-wear-resistant coatings using high velocity oxy-fuel
10.1520/STP35795S I.M. Hutchings, Mechanisms of the erosion of metals by solid particles, Erosion: Prevention and Useful Applications, ASTM STP 664, ASTM, 1979, pp. 59-76.
Wear Lin 141 2 279 1991 10.1016/0043-1648(91)90274-X The effect of impingement angle on slurry erosion
J. Phys. Part D: Appl. Phys. Cooper 25 A195 1992 10.1088/0022-3727/25/1A/031 Selection of wear resistant materials for the petrochemical industry
Wear Finnie 186 1 1 1995 10.1016/0043-1648(95)07188-1 Some reflections on the past and future of erosion
Wear Wood 211 70 1997 10.1016/S0043-1648(97)00071-9 Sand erosion performance of detonation gun applied tungsten carbide/cobalt-chromium coatings
Mater. Sci. Eng. A Verdon A234-A236 731 1997 10.1016/S0921-5093(97)00377-8 Micro-structural and analytical study of thermally sprayed WC-Co coatings in connection with their wear resistance
Wear Hawthorne 229 825 1999 10.1016/S0043-1648(99)00034-4 Comparison of slurry and dry erosion behaviour of some HVOF thermal sprayed coatings
Wear Speyer 250 802 2001 10.1016/S0043-1648(01)00734-7 Erosion of aluminium-based claddings on steel by sand in water
K.S. Tan, R.J.K. Wood, J.A. Wharton, Electrochemical investigation of high velocity oxy-fuel (HVOF) aluminium bronze coatings under slurry erosion in saline environments, NACE Corrosion Conference, NACE, Denver, Colorado, 2002, Paper no. 02199.
K.S. Tan, An electrochemical investigation of a HVOF aluminium bronze coating under slurry erosion-corrosion conditions, M.Phil/Ph.D. Transfer Thesis, University of Southampton, 2001.
MRS Bull. Herman 25 7 17 2000 10.1557/mrs2000.119 Thermal spray: current status and future trends
Mater. Des. Wood 20 179 1999 10.1016/S0261-3069(99)00024-2 The sand erosion performance of coatings
Wear Finnie 3 87 1960 10.1016/0043-1648(60)90055-7 Erosion of surface by solid particles
Wear Finnie 48 181 1978 10.1016/0043-1648(78)90147-3 On the velocity dependence of the erosion of ductile metals by solid particles at low angles of incidence
Wear Sundararajan 149 1-2 111 1991 10.1016/0043-1648(91)90368-5 A comprehensive model for the solid particle erosion of ductile materials
Int. J. Impact Eng. Clark 12 3 415 1992 10.1016/0734-743X(92)90156-N The influence of squeeze film on particle impact velocities in erosion
Wear Zhang 250 762 2001 10.1016/S0043-1648(01)00714-1 Analysis of boiler-tube erosion by the technique of accoustic emission. Part I: Mechanical erosion
Wear Lin 143 231 1991 10.1016/0043-1648(91)90098-F Effect of impact velocity on slurry erosion and a new design of a slurry erosion tester
Wear Tilly 23 1 87 1973 10.1016/0043-1648(73)90044-6 A two stage mechanism of ductile erosion
Wear Hearley 233-235 328 1999 10.1016/S0043-1648(99)00240-9 The erosion behaviour of Ni-Al intermetallic coatings produced by high velocity oxy-fuel thermal spraying
J. Eng. Industry Benchaita 105 215 1983 10.1115/1.3185891 Erosion of a metallic plate by solid particles entrained in a liquid jet
Wear Levy 108 1 1986 10.1016/0043-1648(86)90085-2 The platelet mechanism of erosion of ductile materials
Wear Bitter 6 5 1963 10.1016/0043-1648(63)90003-6 A study of erosion phenomena-Part 1
10.1115/1.3408648 S.P. Timoshenko, J.N. Goodier, Theory of Elasticity, 3rd ed., McGraw-Hill, New York, 1970.
Wear Wheeler 233-235 306 1999 10.1016/S0043-1648(99)00212-4 Solid particle erosion of CVD diamond coatings
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.