최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Experimental mechanics, v.27 no.4, 1987년, pp.381 - 388
Dally, J. W. , Sanford, R. J.
초록이 없습니다.
10.1115/1.4011547 Irwin, G.R., “Analysis of Stresses and Strains Near the End of a Crack Traversing a Plate,” {jtJ. Appl. Mech.}, {vn24} ({sn3}), ({dy1957}).
Experimental Techniques in Fracture Mechanics, ed. A.S. Kobayashi, SEM Monograph, Iowa State University Press (1973).
Mannog, P., “Schattenoptische Messung der Spezifischen Bruchenergie wahrend des Bruchvorgangs bei Plexiglas,” Proc. Int. Conf. on the Physics of Non-Crystalline Solids, Delft, The Netherlands, 481-490 (1964).
J. Appl. Mech. P.S. Theocaris 37 409 1970 10.1115/1.3408521 Theocaris, P.S., “Local Yielding Around A Crack Tip in Plexiglas,”J. Appl. Mech.,37,409-415 (1970).
Experimental Mechanics D.B. Barker 25 4 399 1985 10.1007/BF02321339 Barker, D.B., Sanford, R.J. andChona, R., “Determining K and Related Stress-Field Parameters from Displacement Fields,”Experimental Mechanics,25 (4),399-406 (1985).
10.1016/0093-6413(79)90033-8 Sanford, R.J., “A Critical Re-examination of the Westergaard Method for Solving Opening-Mode Crack Problems,” {jtMech. Res. Comm.}, {vn6} ({sn5}), ({dy1979}).
10.1115/1.4008919 Westergaard, H.M., “Bearing Pressure and Cracks,” J. Appl. Mech.,6 (1939).
Rosakis, A.J. and Ravi Chandra, K., “On Crack Tip Stress States and Experimental Evaluation of Three-Dimensional Effects,” Cal. Inst. of Tech. Rep., FM-84-2 (March 1984).
ASTM-Standard E399-83, “Standard Test Methods for Plane-Strain Fracture Toughness of Metallic Materials,” 1983 Annual Book of ASTM Standards,03.01,ASTM (1983).
Irwin, G.R., “Plastic Zone Near a Crack and Fracture Toughness,” Proc. 7th Sagamore Conf., IV-63 (1960).
※ AI-Helper는 부적절한 답변을 할 수 있습니다.