Huang, He
(United Technologies Research Center, 411 Silver Lane, East Hartford, CT 06108)
,
Spadaccini, Louis J.
(United Technologies Research Center, 411 Silver Lane, East Hartford, CT 06108)
,
Sobel, David R.
(United Technologies Research Center, 411 Silver Lane, East Hartford, CT 06108)
Fuel-cooled thermal management, including endothermic cracking and reforming of hydrocarbon fuels, is an enabling technology for advanced aero engines and offers potential for cycle improvements and pollutant emissions control in gas turbine engine applications. The successful implementation of this...
Fuel-cooled thermal management, including endothermic cracking and reforming of hydrocarbon fuels, is an enabling technology for advanced aero engines and offers potential for cycle improvements and pollutant emissions control in gas turbine engine applications. The successful implementation of this technology is, however, predicated on the use of conventional multicomponent hydrocarbon fuels and an understanding of the combustion characteristics of the reformed fuel mixture. The objective of this research is to develop and demonstrate the technologies necessary for utilizing conventional multicomponent hydrocarbon fuels for fuel-cooled thermal management, including the development of the endothermic potential of JP-7 and JP-8+100, a demonstration of the combustion of supercritical/endothermic fuel mixtures, and conceptual design of a fuel-air heat exchanger. The ability to achieve high heat sinks with existing jet fuels (e.g., JP-7 and JP-8+100) was demonstrated with a bench-scale test rig operating under flow conditions and passage geometries simulative of practical heat exchangers for aircraft and missile applications. Key measurements included fuel heat sink, reaction products, and extent of conversion. Full-scale sector rig tests were conducted to characterize the combustion and emissions of supercritical jet fuel, and demonstrate the safety and operability of the fuel system, including a fuel-air heat exchanger.
Fuel-cooled thermal management, including endothermic cracking and reforming of hydrocarbon fuels, is an enabling technology for advanced aero engines and offers potential for cycle improvements and pollutant emissions control in gas turbine engine applications. The successful implementation of this technology is, however, predicated on the use of conventional multicomponent hydrocarbon fuels and an understanding of the combustion characteristics of the reformed fuel mixture. The objective of this research is to develop and demonstrate the technologies necessary for utilizing conventional multicomponent hydrocarbon fuels for fuel-cooled thermal management, including the development of the endothermic potential of JP-7 and JP-8+100, a demonstration of the combustion of supercritical/endothermic fuel mixtures, and conceptual design of a fuel-air heat exchanger. The ability to achieve high heat sinks with existing jet fuels (e.g., JP-7 and JP-8+100) was demonstrated with a bench-scale test rig operating under flow conditions and passage geometries simulative of practical heat exchangers for aircraft and missile applications. Key measurements included fuel heat sink, reaction products, and extent of conversion. Full-scale sector rig tests were conducted to characterize the combustion and emissions of supercritical jet fuel, and demonstrate the safety and operability of the fuel system, including a fuel-air heat exchanger.
참고문헌 (14)
10.1115/1.2815581 Sobel, D. R., and Spadaccini, L. J., 1997, “Hydrocarbon Fuel Cooling Technologies for Advanced Propulsion,” ASME J. Eng. Gas Turbines Power, 119, pp. 344-351.
Nixon, A. C., Ackerman, G. H., Hawthorme, R. D., Ritchie, A. W., Henderson, H. T., and Bjorklund, I. S., 1964, “Vaporization and Endothermic Fuels for Advanced Engine Applications,” AFAPL TDR 64-100, Parts I, II, and III.
Nixon, A. C., Ackerman, Faith, L. E., Hawthorme, R. D., A. W., Henderson, H. T., Rithie, A. W., Ryland, L. B., and Shryne, T. M., 1967, “Vaporization and Endothermic Fuels for Advanced Engine Applications,” AFAPL TDR 67-114, Parts I, II, and III.
10.1115/99-GT-014 Bruening, G. B., and Chang, W. S., 1999, “Cooled Cooling Air Systems for Turbine Thermal Management,” ASME Paper No. 99-GT-14.
Glickstein, M. R., and Spadaccini, L. J., 1998, “Applications of Endothermic Reaction Technology to the High Speed Civil Transport,” NASA Contractor Report 207404.
10.1115/1.1383772 Spadaccini, L. J., Sobel, D. R., and Huang, H., 2001, “Deposit Formation and Mitigation in Aircraft Fuels,” ASME J. Eng. Gas Turbines Power, 123(4), pp. 741-746.
10.1520/MONO1-EB Hazlett, R. N., 1991, Thermal Oxidation Stability of Aviation Turbine Fuels, ASTM Monograph 1, American Society for Testing and Materials, Philadelphia, PA.
10.1115/1.2793859 Heneghan, S. P., Zabarnick, S., Ballal, D. R., and Harrison, W. E., 1996, “JP-8+100: Development of a Thermally Stable Jet Fuel,” ASME J. Energy Resour. Technol., 118, pp. 170-179.
10.1115/2001-GT-0073 Huang, H., and Spadaccini, L. J., 2001, “Coke Removal in Fuel-Cooled Thermal Management Systems,” ASME Paper No. 2001-GT-0073.
10.1115/GT2002-30071 Spadaccini, L. J., and Huang, H., 2002, “On-line Fuel Deoxygenation for Coke Suppression,” ASME Paper No. GT-2002-30071.
10.2514/6.1998-3532 Edwards, T., 1998, “Prospects for JP-8+225, A Stepping Stone to JP-900,” AIAA Paper 98-3532.
Coordinating Research Council-SAE, 1983, Handbook of Aviation Fuels, CRC Report 530.
10.2514/3.11478 Heneghan, S. P., Locklear, S. L., Geiger, D. L., Anderson, S. D., and Schultz, W. D., 1993, “Static Tests of Jet Fuel Thermal and Oxidative Stability,” J. Propul. Power, 9(1), pp. 5-9.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.