다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
IEEE transactions on magnetics, v.41 no.2, 2005년, pp.756 - 762
Yoon, Jungkeun (Dept. of Mech. Eng., Univ. of Washington, Seattle, WA, USA) , Shen, I.Y.
The purpose of this paper is to present a numerical model predicting the shock response of a rotating-shaft spindle motor with nonlinear fluid-dynamic bearings (FDBs). The paper consists of three parts. The first part is to modify an existing linear spindle vibration model to include arbitrary FDB nonlinearity. The model consists of a rotating part, a stationary part, and nonlinear FDB. Equations of motion are derived and numerically integrated to predict nonlinear shock response of the spindle. The second part summarizes requirements on global coordinates and operating points in formulating nonlinear FDB-load characteristics to be used in the nonlinear spindle model. If bearing stiffness and damping appear as nonlinear functions of bearing eccentricity in local coordinates, the global-bearing stiffness and damping matrices can be obtained through coordinate transformation. The third part of this paper is to apply the mathematical model to various hard disk drive designs. When FDB nonlinearity appears as stiffening springs and dampers, the nonlinear spindle model predicts a slight increase in resonance frequencies and a slight decrease of resonance amplitude for the half-speed whirls. Also, peak amplitude of shock response from the nonlinear analysis is much less than that obtained from the linear analysis.
Shen, I. Y., Ku, C.-P. R.. A Nonclassical Vibration Analysis of a Multiple Rotating Disk and Spindle Assembly. Journal of applied mechanics, vol.64, no.1, 165-174.
Rotordynamics of Turbomachinery vance 1988
Vibration of rotating-shaft design spindles with flexible bases tseng 2002
Hasegawa, T., Du, Hongbing, Osawa, H., Nishimura, H., Oe, T.. Dynamic analysis of a disk-spindle system in a hard disk drive. IEEE transactions on magnetics, vol.39, no.2, 784-789.
Tseng, Chaw-Wu, Shen, Jr-Yi, Shen, I.Y.. Vibration of rotating-shaft HDD spindle motors with flexible stationary parts. IEEE transactions on magnetics, vol.39, no.2, 794-799.
Proc ASME Information Storage and Processing Systems Conf Finite element vibration analysis of HDD spindle systems supported by hydrodynamic bearings taking into account the stator's flexibility lim 2004
Jang, G. H., Han, J. H.. Finite element modal analysis of a spinning flexible disk-spindle system in a HDD considering the flexibility of complicated supporting structure. Microsystem technologies : sensors, actuators, systems integration, vol.11, no.8, 766-778.
Some Problems of Rotordynamics tondl 1965
10.3901/CJME.2005.01.058
J Inf Storage Process Syst Free and forced vibration of a rotating disk pack and spindle motor system with hydrodynamic bearings jintanawan 1999 1 45
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.