최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials transactions, v.46 no.3, 2005년, pp.691 - 696
Asanuma, Hiroshi (Department of Electronics and Mechanical Engineering, Faculty of Engineering, Chiba University) , Hakoda, Genji (Department of Electronics and Mechanical Engineering, Faculty of Engineering, Chiba University) , Kurihara, Haruki (Department of Electronics and Mechanical Engineering, Faculty of Engineering, Chiba University) , Lu, Yun (Department of Urban Environment Systems, Faculty of Engineering, Chiba University)
The present paper proposes an active SiC-fiber/aluminum composite utilizing its thermal deformation caused by non-uniform distribution of reinforcement fibers. A laminate of a continuous and unidirectional SiC fiber reinforced aluminum plate and an unreinforced aluminum plate was fabricated by the i...
1) For example, T. Kishi: Proc. 1st Smart Materials Sympo., ed. by RIMCOF, (1999) pp. 1–3.
2) N. Hagood: Brochure for the MIT Active Materials & Structures Laboratory, (1996).
3) F. Mezzanotti and M. Salvia: Proc. 4th ESSM and 2nd MIMR Conf., (Institute of Physics Publishing, Bristol, 1998) pp. 349–356.
4) H. Asanuma: JOM <B>52</B>, 10 (2000) 21–25.
5) H. Asanuma, O. Haga, N. Naito and T. Tsuchiya: Proc. Annual Meeting of the Japan Society for Composite Materials, (1996) pp. 19–20.
6) H. Asanuma: Proc. JSME Annual Meeting, Vol. I, (1999) pp. 375–376.
7) Y. Lu, M. Hirohashi, H. Asanuma, R. Hayashi and J. Sakamoto: Proc. 29th FRP Sympo., ed. by The Society of Materials Science, (2000) pp. 299–302.
1045-389X J. of Intelligent Material Systems and Structures 7 3 307 1996
9) H. Asanuma, M. Hirohashi, M. Kase and T. Kikuchi: Proc. 1st Japan Intl. SAMPE Sympo., (Japan Chapter of SAMPE, 1989) pp. 979–984.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.