참고문헌 (91)

1. 1901 59 243 0021-1567 J. Iron Steel Inst. Wahlberg A 

2. 1951 The Hardness of Metals Tabor D 

3. 1993 ASM Metals Reference Book Bauccio M 

4. 1956 Microindentation Hardness Testing Mott B W 

5. 1983 10.1080/01418618308234914 48 593 0141-8610 Phil. Mag. Pethica J B 

   상세보기

6. 1982 10.1088/0022-3735/15/1/023 15 119 0022-3735 J. Phys. E: Sci. Instrum. Newey D 

   상세보기

7. 1984 10.1115/1.3260865 106 43 0742-4787 J. Tribol. Loubet J L 

   상세보기

8. Page, Trevor F., Hainsworth, Sarah V.. Using nanoindentation techniques for the characterization of coated systems: a critique. Surface & coatings technology, vol.61, no.1, 201-208.

   상세보기

9. 1996 Solid-Solid Interactions Page T F 

10. 1992 10.1557/JMR.1992.0450 7 450 0884-2914 J. Mater. Res. Page T F 

    상세보기

11. 1996 21 Int. Workshop on Instrumented Indentation Page T F Hainsworth S V Douglas T S 

12. 1992 10.1557/S0883769400041634 l7 28 0025-5408 Mater. Res. Bull. Pharr G M 

    상세보기

13. 1992 10.1016/S0257-8972(07)80082-X 54-55 557 0257-8972 Surf. Coat. Technol. Wright T 

    상세보기

14. 1996 A14 1 0734-2101 J. Vac. Sci. Technol. Sjöström H 

15. 1993 10.1080/01418619308224756 67 1045 0141-8610 Phil. Mag. Vlassak J J 

    상세보기

16. 1988 10.1557/JMR.1988.0931 3 931 0884-2914 J. Mater. Res. Weihs T P 

    상세보기

17. 1986 10.1557/JMR.1986.0601 1 601 0884-2914 J. Mater. Res. Doerner M F 

    상세보기

18. 1992 10.1557/JMR.1992.1564 7 1564 0884-2914 J. Mater. Res. Oliver W C 

    상세보기

19. 10.1002/1521-4079(200004)35:4 3.0.CO;2-Q 

    상세보기

20. Pande, Seetar G., Adkins, James, Williams, Frederick W., Tatem, Patricia A.. Bench‐scale evaluations and mechanistic studies of intumescent/fire‐protective coatings for polyvinyl chloride nitrile rubber. Fire and materials, vol.18, no.5, 277-287.

    상세보기

21. 2004 10.1016/j.mser.2004.05.001 R44 91 Mater. Sci. Eng. Cheng Y T 

    상세보기

22. Bhushan, Bharat, Li, Xiaodong. Nanomechanical characterisation of solid surfaces and thin films. International materials reviews, vol.48, no.3, 125-164.

    상세보기

23. 1998 10.1016/S0921-5093(98)00724-2 A253 151 0921-5093 Mater. Sci. Eng. Pharr G M 

    상세보기

24. 2002 10.1007/978-0-387-22462-6 Nanoindentation Fischer-Cripps A C 

    

25. 1999 10.1557/JMR.1999.0305 14 2283 0884-2914 J. Mater. Res. McGurk M R 

    상세보기

26. Gerberich, W.W., Venkataraman, S.K., Huang, H., Harvey, S.E., Kohlstedt, D.L.. The injection of plasticity by millinewton contacts. Acta metallurgica et materialia, vol.43, no.4, 1569-1576.

    상세보기

27. Hainsworth, S.V., Bartlett, T., Page, T.F.. The nanoindentation response of systems with thin hard carbon coatings. Thin solid films, vol.236, no.1, 214-218.

    상세보기

28. 2003 10.3139/146.030787 94 787 0044-3093 Z. Metallk. Bull S J 

    

29. 1996 10.1557/JMR.1996.0250 11 1987 0884-2914 J. Mater. Res. Hainsworth S V 

    상세보기

30. 1997 10.1557/PROC-436-171 436 171 0272-9172 Mater. Res. Soc. Symp. Proc. Hainsworth S V 

    상세보기

31. Hainsworth, S.V, McGurk, M.R, Page, T.F. The effect of coating cracking on the indentation response of thin hard-coated systems. Surface & coatings technology, vol.102, no.1, 97-107.

    상세보기

32. Yu, H.Y., Sanday, S.C., Rath, B.B.. The effect of substrate on the elastic properties of films determined by the indentation test — axisymmetric boussinesq problem. Journal of the mechanics and physics of solids, vol.38, no.6, 745-764.

    상세보기

33. 1985 10.1017/CBO9781139171731 Contact Mechanics Johnson K L 

    

34. Berasategui, E.G., Page, T.F.. The contact response of thin SiC-coated silicon systems—characterisation by nanoindentation. Surface & coatings technology, vol.163, 491-498.

    상세보기

35. Johnson, K.L.. The correlation of indentation experiments. Journal of the mechanics and physics of solids, vol.18, no.2, 115-126.

    상세보기

36. 1980 10.1111/j.1151-2916.1980.tb10768.x 63 574 0002-7820 J. Am. Ceram. Soc. Lawn B R 

    상세보기

37. Bull, S. J.. Interface engineering and graded films: Structure and characterization. Journal of vacuum science & technology. A, Vacuum, surfaces, and films, vol.19, no.4, 1404-1414.

    상세보기

38. 2003 750 83 0272-9172 Mater. Res. Soc. Symp. Proc. Soare S 

39. Ramsey, P.M., Chandler, H.W., Page, T.F.. Bending tests to estimate the through-thickness strength and interfacial shear strength in coated systems. Thin solid films, vol.201, no.1, 81-89.

    상세보기

40. McGurk, M.R., Chandler, H.W., Twigg, P.C., Page, T.F.. Modelling the hardness response of coated systems: the plate bending approach. Surface & coatings technology, vol.68, 576-581.

    상세보기

41. 1997 436 275 0272-9172 Mater. Res. Soc. Symp. Proc. Sjöström H 

42. 1993 10.1557/JMR.1993.1068 8 1068 0884-2914 J. Mater. Res. Nowak R 

    상세보기

43. 1995 10.1007/978-1-4899-1441-5_19 219 Plastic Deformation of Ceramics III Twigg P C 

    

44. 1993 10.1557/JMR.1993.0297 8 297 0884-2914 J. Mater. Res. Field J S 

    상세보기

45. Hainsworth, S. V., Page, T. F.. Nanoindentation studies of the chemomechanical effect in sapphire. Journal of materials science, vol.29, no.21, 5529-5540.

    상세보기

46. Hainsworth, Sarah V., Page, Trevor F.. Nanoindentation studies of chemomechanical effects in thin film coated systems. Surface & coatings technology, vol.68, 571-575.

    상세보기

47. Sneddon, I.N.. The relation between load and penetration in the axisymmetric boussinesq problem for a punch of arbitrary profile. International journal of engineering science, vol.3, no.1, 47-57.

    상세보기

48. 1990 10.1557/JMR.1990.0123 5 123 0884-2914 J. Mater. Res. Joslin D L 

    상세보기

49. King, R.B.. Elastic analysis of some punch problems for a layered medium. International journal of solids and structures, vol.23, no.12, 1657-1664.

    상세보기

50. 2001 10.1557/JMR.2001.0441 16 3202 0884-2914 J. Mater. Res. Oliver W C 

    상세보기

51. 2000 10.1557/JMR.2000.0171 15 1209 0884-2914 J. Mater. Res. Malzbender J 

    상세보기

52. 1986 10.1116/1.573683 A4 2809 J. Vac. Sci. Technol. Rickerby D S 

    상세보기

53. 1952 10.1088/0370-1298/65/5/307 A65 349 Proc. Phys. Soc. Hill R 

    상세보기

54. Li, Zhiyong, Cheng, Y.-T., Yang, Henry T., Chandrasekar, S.. On two indentation hardness definitions. Surface & coatings technology, vol.154, no.2, 124-130.

    상세보기

55. Bhattacharya, A.K., Nix, W.D.. Finite element simulation of indentation experiments. International journal of solids and structures, vol.24, no.9, 881-891.

    상세보기

56. 1992 10.1557/JMR.1992.0618 7 618 0884-2914 J. Mater. Res. Laursen T A 

    상세보기

57. Knapp, J. A., Follstaedt, D. M., Myers, S. M., Barbour, J. C., Friedmann, T. A.. Finite-element modeling of nanoindentation. Journal of applied physics, vol.85, no.3, 1460-1474.

    상세보기

58. Tunvisut, Karuna, O'Dowd, Noel P., Busso, Esteban P.. Use of scaling functions to determine mechanical properties of thin coatings from microindentation tests. International journal of solids and structures, vol.38, no.2, 335-351.

    상세보기

59. 10.1080/01418610210134332 

    

60. 10.1080/01418610210136439 

    

61. 2001 10.1557/JMR.2001.0314 16 2283 0884-2914 J. Mater. Res. Futakawa M 

    상세보기

62. 2001 16 2137 0884-2914 J. Mater. Res. Ahn J-H 

63. Li, Y, An, B, Fukuyama, S, Yokogawa, K, Yoshimura, M. Surface oxidation of a Nb(100) single crystal by scanning tunneling microscopy. Materials characterization, vol.48, no.2, 163-167.

    상세보기

64. Asif, S. A. Syed, Wahl, K. J., Colton, R. J.. Nanoindentation and contact stiffness measurement using force modulation with a capacitive load-displacement transducer. Review of scientific instruments, vol.70, no.5, 2408-2413.

    상세보기

65. 1997 10.1111/j.1151-2916.1977.tb16106.x 60 86 0002-7820 J. Am. Ceram. Soc. Marshall D B 

    상세보기

66. 1981 10.1111/j.1151-2916.1981.tb10320.x 64 533 0002-7820 J. Am. Ceram. Soc. Anstis G R 

    상세보기

67. 2002 10.1557/JMR.2002.0032 17 224 0884-2914 J. Mater. Res. den Toonder J M J 

    상세보기

68. Volinsky, Alex A, Vella, Joseph B, Gerberich, William W. Fracture toughness, adhesion and mechanical properties of low-K dielectric thin films measured by nanoindentation. Thin solid films, vol.429, no.1, 201-210.

    상세보기

69. 2005 0040-6090 Thin Solid Films Chen J 

70. Li, Xiaodong, Diao, Dongfeng, Bhushan, Bharat. Fracture mechanisms of thin amorphous carbon films in nanoindentation. Acta materialia, vol.45, no.11, 4453-4461.

    상세보기

71. Li, Xiaodong, Bhushan, Bharat. Measurement of fracture toughness of ultra-thin amorphous carbon films. Thin solid films, vol.315, no.1, 214-221.

    상세보기

72. 1995 10.1557/PROC-356-663 356 663 0272-9172 Mater. Res. Soc. Symp. Proc. Harding D S 

    상세보기

73. Thouless, M.D.. An analysis of spalling in the microscratch test. Engineering fracture mechanics, vol.61, no.1, 75-81.

    상세보기

74. 1992 10.1557/PROC-239-337 239 337 0272-9172 Mater. Res. Soc. Symp. Proc. Lucas B N 

    상세보기

75. 1992 10.1557/PROC-239-319 239 319 0272-9172 Mater. Res. Soc. Symp. Proc. Baker S P 

    상세보기

76. Chudoba, T., Richter, F.. Investigation of creep behaviour under load during indentation experiments and its influence on hardness and modulus results. Surface & coatings technology, vol.148, no.2, 191-198.

    상세보기

77. Garcia, I. Arce, G.-Berasategui, E., Bull, S. J., Page, T. F., Neidhardt, J., Hultman, L., Hellgren, N.. How hard is fullerene-like CN x ? Some observations from the nanoindentation response of a magnetron-sputtered coating. Philosophical magazine. A, Physics of condensed matter, defects and mechanical properties, vol.82, no.10, 2133-2147.

    상세보기

78. Cheng, Yang-Tse, Cheng, Che-Min. Scaling relationships in indentation of power-law creep solids using self-similar indenters. Philosophical magazine letters, vol.81, no.1, 9-16.

    상세보기

79. 2004 795 363 0272-9172 Mater. Res. Soc. Symp. Proc. Soare S 

80. Soare, S., Bull, S.J., O'Neil, A.G., Wright, N., Horsfall, A., dos Santos, J.M.M.. Nanoindentation assessment of aluminium metallisation; the effect of creep and pile-up. Surface & coatings technology, vol.177, 497-503.

    상세보기

81. 1989 10.1179/sur.1989.5.3.213 5 213 0267-0844 Surf. Eng. Knight J C 

    상세보기

82. Page, T.F., Knight, J.C.. Factors affecting the tribological behaviour of thin hard TiN and TiC coatings. Surface & coatings technology, vol.39, no.1, 339-354.

    상세보기

83. Bull, S.J, Berasetegui, E.G, Page, T.F. Modelling of the indentation response of coatings and surface treatments. Wear: An international journal on the science and technology of friction, lubrication and wear, vol.256, no.9, 857-866.

    상세보기

84. 2003 750 489 0272-9172 Mater. Res. Soc. Symp. Proc. Bull S J 

85. Bull, S.J. Modelling the hardness response of bulk materials, single and multilayer coatings. Thin solid films, vol.398, 291-298.

    상세보기

86. G-Berasategui, E., Bull, S.J., Page, T.F.. Mechanical modelling of multilayer optical coatings. Thin solid films, vol.447, 26-32.

    상세보기

87. Bull, S.J, Bhat, D.G, Staia, M.H. Properties and performance of commercial TiCN coatings. Part 1: coating architecture and hardness modelling. Surface & coatings technology, vol.163, 499-506.

    상세보기

88. 1961 10.1088/0370-1328/78/2/302 78 169 0370-1328 Proc. Phys. Soc. Stillwell N A 

    상세보기

89. Burnett, P.J., Rickerby, D.S.. The mechanical properties of wear-resistant coatings : I: Modelling of hardness behaviour. Thin solid films, vol.148, no.1, 41-50.

    상세보기

90. Bull, S.J, Rickerby, D.S. New developments in the modelling of the hardness and scratch adhesion of thin films. Surface & coatings technology, vol.42, no.2, 149-164.

    상세보기

91. Bhowmick, S., Jayaram, V., Biswas, S.K.. Deconvolution of fracture properties of TiN films on steels from nanoindentation load–displacement curves. Acta materialia, vol.53, no.8, 2459-2467.

    상세보기