최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of composites for construction, v.11 no.2, 2007년, pp.161 - 174
Lu, X. Z. (Lecturer, Dept. of Civil Engineering, Tsinghua Univ., Beijing, China. E-mail: luxinzheng@263.net) , Teng, J. G. (Lecturer, Dept. of Civil Engineering, Tsinghua Univ., Beijing, China. E-mail: luxinzheng@263.net) , Ye, L. P. (Lecturer, Dept. of Civil Engineering, Tsinghua Univ., Beijing, China. E-mail: luxinzheng@263.net) , Jiang, J. J. (Lecturer, Dept. of Civil Engineering, Tsinghua Univ., Beijing, China. E-mail: luxinzheng@263.net)
초록이 없습니다.
American Concrete Institute (ACI). (2002). “Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures.” ACI 440.2R-02 ACI Committee 440 Detroit.
Aprile, Alessandra, Spacone, Enrico, Limkatanyu, Suchart. Role of Bond in RC Beams Strengthened with Steel and FRP Plates. Journal of structural engineering, vol.127, no.12, 1445-1452.
ACI Struct. J. Arduini M. 193 101 2 2004 Performance of one-way reinforced concrete slabs with externally bonded fiber-reinforced polymer strengthening
ACI Struct. J. Arduini M. 363 94 4 1997 Brittle failure in FRP plate and sheet bonded beams
Beber A. J. Filho A. C. and Campagnolo J. L. (2001). “CFRP in the strengthening of reinforced concrete beams.” Proc. Int. Conf. on FRP Composites in Civil Engineering J. G. Teng ed. Elsevier Science Amsterdam The Netherlands 391-398.
ACI Struct. J. Brena S. F. 36 100 1 2003 Increasing flexural capacity of reinforced concrete beams using carbon fiber-reinforced polymer composite
Buyukozturk, O.. Nonlinear analysis of reinforced concrete structures. Computers & structures, vol.7, no.1, 149-156.
Model Code 90 CEB-FIP 1993
Ceroni F. and Prota A. (2001). “Experimental behavior of RC beams strengthened by FRP sheets.” Proc. Int. Conf. on Composites in Constructions J. Figueiras L. Juvandes and R. Faria eds. Balkema Rotterdam The Netherlands 499-504.
Chan T. K. and Niall M. (2001). “Strengthening of one-way slabs using carbon fibre plates: The effect of preload.” CSE Research Bulletin No. 14 Nanyang Technology Univ. Singapore.
Chen, J. F., Teng, J. G.. Anchorage Strength Models for FRP and Steel Plates Bonded to Concrete. Journal of structural engineering, vol.127, no.7, 784-791.
Fang T. Q. (2002). “Study on U-shaped sheet behavior of anti-debonding in the concrete beam reinforced flexurally with FRP.” Master's thesis Tsinghua Univ. Tsinghua China.
Ferretti, Daniele, Savoia, Marco. Non-linear model for R/C tensile members strengthened by FRP-plates. Engineering fracture mechanics, vol.70, no.7, 1069-1083.
fib . (2001). “Externally bonded FRP reinforcement for RC structures.” Bulletin No. 14 .
Gao B. Leung W. H. Cheung C. M. Kim J. K. and Leung C. K. Y. (2001). “Effects of adhesive properties on strengthening of concrete beams with composite strips.” Proc. Int. Conf. on FRP Composites in Civil Engineering J. G. Teng ed. Elsevier Science Amsterdam The Netherlands 423-432.
Garden, H.N., Hollaway, L.C.. An experimental study of the influence of plate end anchorage of carbon fibre composite plates used to strengthen reinforced concrete beams. Composite structures, vol.42, no.2, 175-188.
GB-50010. (2002). “Code for design of concrete structures.” China Building Industry Press Beijing.
ACI Struct. J. Grace N. F. 692 99 5 2002 Strengthening of concrete beams using innovative ductile fiber-reinforced polymer fabric
Hognestad E. (1951). “A study of combined bending and axial load in reinforced concrete members.” Bulletin Series No. 399 Bulletin No.1 Univ. of Illinois Engineering Experiment Station.
Japan Society of Civil Engineers (JSCE). (2001). “Recommendations for upgrading of concrete structures with use of continuous fiber sheets.” Concrete Engineering Series 41 Tokyo.
Kwak H. G. and Filippou F. C. (1990). “Finite-element analysis of reinforced concrete structures under monotonic load.” Research Rep. No. UCB/SEMM-90/14 33-39 Dept. of Civil Engineering Univ. of California at Berkeley Berkeley Calif.
Lu, X.Z., Teng, J.G., Ye, L.P., Jiang, J.J.. Bond–slip models for FRP sheets/plates bonded to concrete. Engineering structures, vol.27, no.6, 920-937.
Lu, X.Z., Ye, L.P., Teng, J.G., Jiang, J.J.. Meso-scale finite element model for FRP sheets/plates bonded to concrete. Engineering structures, vol.27, no.4, 564-575.
User’s manual MSC.MARC 2003
Niu H. D. (2002). “Interfacial fracture mechanisms and performance evaluation of RC structural system strengthened with FRP sheets.” Doctoral thesis Ibaraki Univ. Ibaraki Japan.
Oehlers, D.J., Park, S.M., Mohamed Ali, M.S.. A structural engineering approach to adhesive bonding longitudinal plates to RC beams and slabs. Composites. Part A, Applied science and manufacturing, vol.34, no.9, 887-897.
Rahimi, Hamid, Hutchinson, Allan. Concrete Beams Strengthened with Externally Bonded FRP Plates. Journal of composites for construction, vol.5, no.1, 44-56.
Heron Rots J. G. 1 30 1 1985 Smeared crack approach and fracture localization in concrete
Sato Y. (2003). “Mechanical characteristics of the retrofitted members.” Technical Rep. of JCI Technical Committee on Retrofit Technology 62-78.
Sohn, Woong H., Bong, Ha H., Hong, Soon H.. Microstructure and bonding mechanism of Al/Ti bonded joint using Al–10Si–1Mg filler metal. Materials science & engineering. properties, microstructure and processing. A, Structural materials, vol.355, no.1, 231-240.
FRP-strengthened RC structures Teng J. G. 2002
Teng, J.G., Smith, S.T., Yao, J., Chen, J.F.. Intermediate crack-induced debonding in RC beams and slabs. Construction & building materials, vol.17, no.6, 447-462.
Triantafillou, T. C., Plevris, N.. Strengthening of RC beams with epoxy-bonded fibre-composite materials. Materials and structures, vol.25, no.4, 201-211.
Tumialan G. Serra P. Nanni A. and Belarbi A. (1999). “Concrete cover delamination in reinforced concrete beams strengthened with carbon fiber reinforced polymer sheets.” Proc. 4th Int. Symp. on Fiber Reinforced Polymer Reinforcement for Reinforced Concrete Structures C. W. Dolan S. H. Rizkalla and A. Nanni eds. Md. 725-735.
Heron Walraven J. B. 26 1 1981 Theory and experiments on the mechanical behavior of cracks in plain and reinforced concrete subject to shear load
ACI Struct. J. Wong S. Y. 47 100 1 2003 Towards modeling of reinforced concrete members with externally bonded fiber-reinforced polymer composites
J. Mater., Concr. Struct. and Pavements, JSCE Wu Z. S. 231 49 662 2000 Shear transfer along FRP-concrete interface in flexural members
Wu, Zhishen, Yin, Jun. Fracturing behaviors of FRP-strengthened concrete structures. Engineering fracture mechanics, vol.70, no.10, 1339-1355.
Xiong G. J. Jiang H. Huang J. Z. Yang J. Z. and Xie H. C. (2001). “Behavior of concrete beams strengthened with hybrid carbon fiber-glass fiber sheets.” Proc. Int. Conf. on FRP Composites in Civil Engineering J. G. Teng ed. Elsevier Science Amsterdam The Netherlands 407-414.
Yao, J., Teng, J. G., Lam, L.. Experimental Study on Intermediate Crack Debonding in FRP-Strengthened RC Flexural Members. Advances in structural engineering, vol.8, no.4, 365-396.
Building Structures Ye L. P. 3 35 3 2001 Analysis and calculation of flexural strength of RC members strengthened with CFRP sheet
Yi W. J. and Huang H. M. (2001). “Experimental study on the flexural behavior of RC beams strengthened with CFRP laminates.” Proc. Int. Conf. on FRP Composites in Civil Engineering J. G. Teng ed. Elsevier Science Amsterdam The Netherlands 399-406.
Yuan, H., Teng, J.G., Seracino, R., Wu, Z.S., Yao, J.. Full-range behavior of FRP-to-concrete bonded joints. Engineering structures, vol.26, no.5, 553-565.
Struct. Eng. Zhao M. 52 2 2002 Experimental study on flexural RC members strengthened with CFRP fabrics
※ AI-Helper는 부적절한 답변을 할 수 있습니다.