최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기The structural design of tall and special buildings, v.16 no.2, 2007년, pp.205 - 230
Moon, Kyoung-Sun (Department of Architecture, University of Illinois at Urbana–) , Connor, Jerome J. (Champaign, Illinois, USA) , Fernandez, John E. (Department of Civil and Environmental Engineering, Massachusetts Institute of Technology, Cambridge, Massachusetts, USA)
Diagrid structural systems are emerging as structurally efficient as well as architecturally significant assemblies for tall buildings. This paper presents a simple methodology for determining preliminary member sizes. The methodology is applied to a set of building heights ranging from 20 to 60 sto...
Manual of Steel Construction: Load and Resistance Factor Design AISC 1998
Minimum Design Loads for Buildings and Other Structures ASCE 1996
The Skyscraper: A Study in the Economic Height of Modern Office Buildings Clark W 1930
Introduction to Structural Motion Control Connor J 2003
Structural Systems for Tall Buildings Council on Tall Buildings and Urban Habitat 1995
Form Follows Finance: Skyscrapers and Skylines in New York and Chicago Willis C 1995
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.