최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials characterization, v.59 no.1, 2008년, pp.53 - 60
Liu, S.D. (School of Materials Science and Engineering, Central South University, Changsha, Hunan, 410083, PR China) , Zhang, X.M. , Chen, M.A. , You, J.H.
The influence of aging on quench sensitivity effect of 7055 aluminum alloy was investigated by means of tensile properties and electrical conductivity tests. The microstructures were characterized by optical microscopy (OM) and transmission electron microscopy (TEM). Compared with single aging, dupl...
J Mater Process Technol Robinson 119 1-3 261 2001 10.1016/S0924-0136(01)00927-X Quench sensitivity and tensile property inhomogeneity in 7010 forgings
Mater Sci Eng A Struct Mater Prop Microstruct Process Lim 371 1-2 82 2004 10.1016/S0921-5093(03)00653-1 Improved quench sensitivity in modified aluminum alloy 7175 for thick forging applications
Scr Mater Deschamps 39 11 1517 1998 10.1016/S1359-6462(98)00357-1 Nature and distribution of quench-induced precipitation in an Al-Zn-Mg-Cu alloy
Metall Trans Thompson 2 4 1149 1971 10.1007/BF02664247 Quench rate effects in Al-Zn-Mg-Cu alloys
Metall Trans Conserva 4 3 857 1973 10.1007/BF02643097 Interpretation of quench-sensitivity in Al-Zn-Mg-Cu alloys
Metall Trans Smith 1 6 1735 1970 10.1007/BF02642024 The effect of two-step aging on the quench sensitivity of an Al-5PctZn-2PctMg alloy with and without 0.1Pct Cr
Metall Trans Staley 3 1 191 1972 10.1007/BF02680598 Heat treating characteristics of high strength Al-Zn-Mg-Cu alloys with and without silver additions
MacKenzies DS. Quench rate and ageing effects in aluminum AlZnMgCu alloys. Ph.D. Dissertation, University of Missouri-Rolla, Missouri, American; 2002.
Mater Sci Technol Dumont 20 5 567 2004 10.1179/026708304225016662 Characterization of precipitation microstructures in aluminium alloys 7040 and 7050 and their relationship to mechanical behavior
J Mater Process Technol Yamazaki 38 4 689 1993 10.1016/0924-0136(93)90044-7 Peripheral-recrystallized structures formed in Al-Zn-Mg-Cu-Zr alloy materials during extrusion and their quenching sensitivity
Prog Aerosp Sci Starke 32 2-3 131 1996 10.1016/0376-0421(95)00004-6 Application of modern aluminum alloys to aircraft
J Inst Met Holl 97 200 1969 Investigations into the possibility of reducing quench-sensitivity in high strength Al-Zn-Mg-Cu alloys
Liu SD, Zhang XM, You JH. TTP diagrams for 7055 aluminium alloy. Mater Sci Technol. in press.
Metall Mater Trans, A Phys Metall Mater Sci Mukhopadhyay 28A 11 2429 1997 10.1007/s11661-997-0200-9 Development of reproducible and increased strength properties in thick extrusions of low-alloy AlZnMgCu based AA7075
Mater Sci Technol Robson 18 6 607 2002 10.1179/026708302225003622 Predicting the recrystallized volume fraction in AA7050 hot rolled plate
Mater Sci Technol Engler 12 9 717 1996 10.1179/mst.1996.12.9.717 Recrystallisation and texture in hot deformed aluminium alloy 7010 thick plates
Mater Sci Eng, A Struct Mater Prop Microstruct Process Deschamps 251 1-2 200 1998 10.1016/S0921-5093(98)00615-7 Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy
Mater Sci Forum Milman 396-402 1217 2002 10.4028/www.scientific.net/MSF.396-402.1217 Microstructure and mechanical properties of cast and wrought Al-Zn-Mg-Cu alloys modified with Zr and Sc
Acta Metall Kirkwood 18 6 563 1970 10.1016/0001-6160(70)90085-4 Precipitate number density in a Ni-Al alloy at early stages of ageing
J Jpn Inst Met Abe 36 6 597 1972 10.2320/jinstmet1952.36.6_597 Studies on the precipitate free zone in an Al-Zn-Mg alloy
Mater Sci Forum Hansen 396-402 815 2002 10.4028/www.scientific.net/MSF.396-402.815 Structure and transformations during artificial aging of an industrial 7xxx-series alloy
Mater Sci Eng, A Struct Mater Prop Microstruct Process Werenskiold 293 1-2 267 2000 10.1016/S0921-5093(00)01247-8 Characterization and modeling of precipitation kinetics in an Al-Zn-Mg alloy
J Alloys Compd Chinh 378 1-2 52 2004 10.1016/j.jallcom.2003.11.175 The effect of Cu on mechanical and precipitation properties of Al-Zn-Mg alloys
Acta Mater Berg 49 17 3443 2001 10.1016/S1359-6454(01)00251-8 GP-zones in Al-Zn-Mg alloys and their role in artificial aging
Acta Mater Guyot 44 10 4161 1996 10.1016/S1359-6454(96)00033-X Precipitation kinetics, mechanical strength and electrical conductivity of AlZnMgCu alloys
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.