최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials transactions, v.48 no.11, 2007년, pp.3028 - 3030
Kim, Chung Seok (Division of Materials Science and Engineering, Korea University) , Kwun, Sook In (Division of Materials Science and Engineering, Korea University)
The influence of microstructure on the magnetic properties was experimentally investigated to estimate the creep damage in ferritic 11Cr-3.45W steel as an applicable research for the structural health monitoring. The microstructure showed significant changes in precipitate size (dp), precipitate num...
Ennis, P.J., Zielinska-Lipiec, A., Wachter, O., Czyrska-Filemonowicz, A.. Microstructural stability and creep rupture strength of the martensitic steel P92 for advanced power plant. Acta materialia, vol.45, no.12, 4901-4907.
Taneike, Masaki, Abe, Fujio, Sawada, Kota. Creep-strengthening of steel at high temperatures using nano-sized carbonitride dispersions. Nature, vol.424, no.6946, 294-296.
Takahashi, S., Echigoya, J., Motoki, Z.. Magnetization curves of plastically deformed Fe metals and alloys. Journal of applied physics, vol.87, no.2, 805-813.
1345-9678 Mater. Trans. N. Nakai, Y. Furuya and M. Obata 30 197 1989
Byeon, Jai Won, Kim, C. S., Kwun, S. I.. Evaluation of thermal degradation of 2.25Cr–1Mo steel by magnetic Barkhausen noise. Physica status solidi. B, Basic research, vol.241, no.7, 1756-1760.
Acta Metall. G. Eggeler 37 3225 1989
Acta Metall. G. K. Williamson and W. H. Hall 1 22 1953
Natori, Masahide, Futamura, Yuichi, Tsuchiyama, Toshihiro, Takaki, Setsuo. Difference in recrystallization behavior between lath martensite and deformed ferrite in ultralow carbon steel. Scripta materialia, vol.53, no.5, 603-608.
0921-5093 Mater. Sci. Eng. A F. Abe, T. Horiuch, M. Taneike and 378 299 2004
Degauque, J., Astie, B.. Influence of the grain size on the magnetic and magnetomechanical properties of high-purity iron. Journal of magnetism and magnetic materials, vol.26, no.1, 261-263.
Philos. Mag. B M. G. Hetherington, J. P. Jakubovic 56 561 1987
12) B. D. Cullity: <I>Introduction to Magnetic Materials</I>, 2nd ed., (Addision-Wesley, New York, USA, 1972) pp. 317–333.
Sablik, M. J.. Modeling the effect of grain size and dislocation density on hysteretic magnetic properties in steels. Journal of applied physics, vol.89, no.10, 5610-5613.
0021-8979 J. Appl. Phys. A. H. Qureshi and L. N. Chaudhary 41 1042 1970
Astie, B., Degauque, J., Porteseil, J., Vergne, R.. Influence of the dislocation structures on the magnetic and magnetomechanical properties of high-purity iron. IEEE transactions on magnetics, vol.17, no.6, 2929-2931.
Mumtaz, K., Takahashi, S., Echigoya, J., Zhang, Lf., Kamada, Y., Sato, M.. Detection of martensite transformation in high temperature compressively deformed austenitic stainless steel by magnetic NDE technique. Journal of materials science, vol.38, no.14, 3037-3050.
Solid State Phenomena C. S. Kim, S. I. Kwun, B. Y. Ahn, S 118 475 2006
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.