최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기粉體および粉末冶金 = Journal of the Japan society of powder and powder metallurgy, v.53 no.10, 2006년, pp.815 - 820
三浦 秀士 (九州大学) , 竹増 (大学) , 光家 (院工学) , くわ野 友紀 (研) , 伊藤 芳典 (究院知能機械システム部門) , 佐藤 憲治 (九州大学)
In this study, the metal injection molding process was applied to produce the sintered titanium alloy compacts using pre-alloyed Ti-6Al-4V powders obtained by gas atomization. The effect of sintering conditions on the density, mechanical properties, and oxygen and carbon contents were investigated a...
1) Y. Itoh, T. Harikou, K. Sato and H. Miura: "Improvement of Ductility for Injection Molding Ti-6Al-4V Alloy", Proceedings of 2004 Powder Metallurgy World Congress (PM2004), 4, 445-450.
2) K. Kusaka, K. Tomio and H. Akira: "The application of pure Ti and Ti-6Al-4V alloy to Metal Injection Molding (MIM)", Titan, 44 (1996) 229-233.
3) Edition of Japan Institute of Metals: "Kinzoku Data Book", Maruzen, (1993) 479.
10.2497/jjspm.52.43 4) Y. Itoh, T. Harikou, K. Satoh and H. Miura: "Fabrication of Near-α Titanium Alloy by Metal Injection Molding", J. Jpn. Soc. Powder Powder Metallurgy, 52 (2004) 43-48.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.