최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Optics and laser technology, v.40 no.5, 2008년, pp.735 - 741
Paul, C.P. (Automated Laser Fabrication Laboratory, Department of Mechanical and Mechatronics Engineering, University of Waterloo, Waterloo, ON, Canada N2L 3G1) , Khajepour, A.
Automated Laser Fabrication (ALFa) is one of the most rapidly growing rapid-manufacturing technologies. It is similar to laser cladding at process level with different end applications. In general, laser cladding technique is used to deposit materials on the substrate either to improve the surface p...
Clint Atwood. Research, development and commercialization of Laser Engineered Net Shaping (LENS™). In: Proceedings of the 2nd international conference on rapid manufacturing, Nottingham, UK, July 11-12, 2007.
J Laser Appl Xue 12 4 2000 10.2351/1.521927 Free-form laser consolidation for producing metallurgically sound and functional components
10.1115/DETC2003/DFM-48166 Hatanaka M, Cutkosky MR. Process planning for embedding flexible materials in multi-material prototypes. In: Proceedings of the ASME design engineering technical conferences and computers and information in engineering conference (DETC’03) Chicago, IL, USA, September 2-6, 2003.
〈http://www.eos.info/applications/target-metal-parts.html?L=1〉.
Mazumder J. Innovative fabrication of long-life dies and tools by direct metal deposition and impact on energy and environment. Presented at Indo-US Workshop on Rapid Manufacturing, Bangalore, India, April 17-19, 2006.
Laser Opt Eng Paul C 44 10 2006 10.1016/j.optlaseng.2005.08.005 Laser rapid manufacturing of colmonoy components
Appl Surf Sci Pinkerton 247 1 2005 10.1016/j.apsusc.2005.01.083 Multiple-layer laser deposition of steel components using gas- and water-atomised powders: the differences and the mechanisms leading to them
Scripta Mater Zhong 53 2 2005 10.1016/j.scriptamat.2005.03.047 Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy
Rapid Prototyping J Das 4 3 1998 10.1108/13552549810222939 Direct laser freeform fabrication of high performance metal components
Ready JF. LIA Handbook of Laser Material Processing. Laser Institute of America. Orlando, FL: Mangolia Publishing Inc.; 2001.
Steen 2003 Laser material processing
Opt Quant Electron Techel 27 1995
Wear Cadnas 212 1997 Wear behaviour of laser cladded and plasma sprayed WC-Co coatings
J Mater Sci McCay 34 1999 The influence of metals and carbides during laser surface modification of low alloy steel
Surf Coat Technol Hidouci 117 2003 Microstructural and mechanical characteristics of laser coatings
Surf Coat Technol Zhong 128 2002 10.1016/S0257-8972(02)00165-2 Microstructural evolution in high power laser cladding of Stellite 6+WC layers
Surf Coat Technol Yang 130 2000 10.1016/S0257-8972(00)00909-9 Microstructure evolution of laser clad layers of W-C-Co alloy powders
J Mater Process Technol Przybylowicz 109 2001 Structure of laser cladded tungsten carbide composite coatings
Int J Adv Manuf Technol Wang 19 2002 Direct selective laser sintering of hard metal powders: experimental study and simulation
Pinto MA, Costa L, Vilar R, Lerardi MCF. Characterization of laser cladded WC-Co composite coating. Acta Microscopica. In: Proceedings of the XIX congress of the Brazilian Society for Microscopy and Microanalysis 2002; 12 C.
Int J Refract Met Hard Mater Zhong 24 2006 Formation of WC/Ni hard alloy coating by laser cladding of W/C/Ni pure element powder blend
Wear Huang 256 2004 Abrasive wear performance and microstructure of laser clad WC/Ni layers
Surf Coat Technol Sun 194 2005 Parametric investigation of pulsed Nd:YAG laser cladding of stellite 6 on stainless steel
Mater Sci Eng-A Paul 464 1 2007 10.1016/j.msea.2007.01.132 Cladding of WC-12Co on low carbon steel using a pulsed Nd: YAG laser
Upadhyaya 1998 Cemented tungsten carbides production, properties and testing
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.