[논문]Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data

Kim, Tae Ho; San André; s, Luis

doi:10.1115/1.2770494

Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data

Journal of engineering for gas turbines and power, v.130 no.1, 2008년, pp.012504 -

Kim, Tae Ho (Mechanical Engineering Department, Texas A&M University, College Station, TX 77843-3123) , San Andrés, Luis (Fellow ASME)

Abstract ▼ AI-Helper

Widespread usage of gas foil bearings (FBs) into microturbomachinery to midsize gas turbine engines requires accurate performance predictions anchored to reliable test data. This paper presents a simple yet accurate model predicting the static and dynamic force characteristics of gas FBs. The analysis couples the Reynolds equation for a thin gas film to a simple elastic foundation model for the top foil and bump strip layer. An exact flow advection model is adopted to solve the partial differential equations for the zeroth- and first-order pressure fields that render the FB load capacity and frequency-dependent force coefficients. As the static load imposed on the foil bearing increases, predictions show that the journal center displaces to eccentricities exceeding the bearing nominal clearance. A nearly constant FB static stiffness, independent of journal speed, is estimated for operation with large loads, and approaching closely the bearing structural stiffness derived from contact operation without rotor spinning. Predicted minimum film thickness and journal attitude angle demonstrate good agreement with archival test data for a first-generation gas FB. The bump-foil-strip structural loss factor, exemplifying a dry-friction dissipation mechanism, aids to largely enhance the bearing direct damping force coefficients. At high loads, the bump-foil structure influences most the stiffness and damping coefficients. The predictions demonstrate that FBs have greatly different static and dynamic force characteristics when operating at journal eccentricities in excess of the bearing clearance from those obtained for operation at low loads, i.e., small journal eccentricity.

참고문헌 (23)

Thin Films in Tribology Heshmat 559 Compliant Foil Bearings Technology and Their Application to High Speed Turbomachinery
10.1115/97-GT-347 Agrawal, G. L. , 1997, “Foil Air？Gas Bearing Technology: An Overview,” ASME Paper No. 97-GT-347.
10.1080/10402000008982410 DellaCorte, C., and Valco, M. J., 2000, “Load Capacity Estimation of Foil Air Journal Bearings for Oil-Free Turbomachinery Applications,” NASA？TM, Report No. 2000-209782.

상세보기
0742-4787 ASME J. Tribol. Heshmat 116 287 10.1115/1.2927211 Advancements in the Performance of Aerodynamic Foil Journal Bearings: High Speed and Load Capacity

상세보기
10.1080/10402000008982407 DellaCorte, C., Lukaszewicz, V., Valco, M. J., Radil, K. C., and Heshmat, H., 2000, “Performance and Durability of High Temperature Foil Air Bearings for Oil-Free Turbomachinery,” NASA？TM, Report No. 2000-209187？REV1.

상세보기
1040-2004 Tribol. Trans. Lee 47 54 10.1080/05698190490279038 Unbalance Response of a Super-Critical Rotor Supported by Foil Bearings: Comparison With Test Results

상세보기
0301-679X Tribol. Int. Lee 37 679 10.1016/S0301-679X(03)00013-6 Dynamic Characteristics of a Flexible Rotor System Supported by a Viscoelastic Foil Bearing (VEFB)

상세보기
0022-2305 ASME J. Lubr. Technol. Heshmat 105 647 10.1115/1.3254697 Analysis of Gas-Lubricated Foil Journal Bearings

상세보기
0022-2305 ASME J. Lubr. Technol. Heshmat 105 638 10.1115/1.3254696 Analysis of Gas Lubricated Compliant Thrust Bearings

상세보기
0742-4787 ASME J. Tribol. Peng 115 20 10.1115/1.2920982 Calculation of Stiffness and Damping Coefficients for Elastically Supported Gas Foil Bearings

상세보기
1040-2004 Tribol. Trans. Carpino 37 43 10.1080/10402009408983264 Effects of Membrane Stresses in the Prediction of Foil Bearing Performance

상세보기
0742-4787 ASME J. Tribol. Peng 119 85 10.1115/1.2832484 Finite Element Approach to the Prediction of Foil Bearing Rotor Dynamic Coefficients

상세보기
0742-4787 ASME J. Tribol. San Andres 117 185 10.1115/1.2830598 Turbulent Flow Foil Bearings for Cryogenic Applications

상세보기
0742-4787 ASME J. Tribol. Iordanoff 121 816 10.1115/1.2834140 Analysis of an Aerodynamic Compliant Foil Thrust Bearing: Method for a Rapid Design

상세보기
0742-4787 ASME J. Tribol. Khonsari 126 542 10.1115/1.1739242 Hydrodynamic Analysis of Compliant Foil Bearing With Compressible Air Flow

상세보기
10.2172/7095892 Ruscitto, D., Mc Cormick, J., and Gray, S., 1978, “Hydrodynamic Air Lubricated Compliant Surface Bearing for an Automotive Gas Turbine Engine I-Journal Bearing Performance,” NASA, Report No. CR-135368.
1040-2004 Tribol. Trans. Carpino 46 560 10.1080/10402000308982664 A Fully Coupled Finite Element Formulation for Elastically Supported Foil Journal Bearings

상세보기
0742-4787 ASME J. Tribol. Faria 122 124 10.1115/1.555335 On the Numerical Modeling of High speed Hydrodynamic Gas Bearing

상세보기
0022-2305 ASME J. Lubr. Technol. Heshmat 104 149 10.1115/1.3253173 Development of Foil Journal Bearings for High Load Capacity and High Speed Whirl Stability

상세보기
Proceedings of the 30th Turbomachinery Symposium Chen 103 Application of Foil Bearings to Helium Turbocompressor
0742-4795 ASME J. Eng. Gas Turbines Power Rubio 128 653 10.1115/1.2056047 Bump-Type Foil Bearing Structural Stiffness: Experiments and Predictions

상세보기
ASME 14th Biennial Conference on Mechanical Vibration and Noise Ku 83 An Experimental and Theoretical Study of the Dynamic Structural Stiffness in Compliant Foil Journal Bearings
Kim, T. H. , 2006, “Analysis of Gas Foil Bearings Integrating 1D and 2D Finite Element Structural Models: Predictions Compared to Test Data,” ASME Paper No. IMECE2006-16375.

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Heavily Loaded Gas Foil Bearings: A Model Anchored to Test Data

Abstract ▼ AI-Helper

참고문헌 (23)

이 논문을 인용한 문헌

관련 콘텐츠

원문 URL 링크

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트