다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
International journal of heat and mass transfer, v.51 no.15/16, 2008년, pp.3825 - 3839
Sung, M.K. , Mudawar, I.
AI-Helper
This paper explores the single-phase and two-phase cooling performance of a hybrid micro-channel/slot-jet module using HFE-7100 as working fluid. Three-dimensional numerical simulation using the k-ε turbulent model is used to both assess the single-phase performance and seek a geometry that enh...
IEEE Trans. Compon. Pack. Technol. Mudawar 24 122 2001 10.1109/6144.926375 Assessment of high-heat-flux thermal management schemes
IEEE Electron. Dev. Lett. Tuckerman 2 126 1981 10.1109/EDL.1981.25367 High-performance heat sinking for VLSI
Int. J. Heat Mass Transfer Bowers 37 321 1994 10.1016/0017-9310(94)90103-1 High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks
Int. J. Heat Mass Transfer Lelea 47 4215 2004 10.1016/j.ijheatmasstransfer.2003.11.034 The experimental research on micro-tube heat transfer and fluid flow of distilled water
Int. J. Heat Mass Transfer Fedorov 43 399 2000 10.1016/S0017-9310(99)00151-9 Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging
Int. J. Heat Mass Transfer Qu 45 2549 2002 10.1016/S0017-9310(01)00337-4 Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink
ASME J. Heat Transfer Kim 121 639 1999 10.1115/1.2826027 forced convection in microstructures for electronic equipment cooling
Numer. Heat Transfer Ambatipudi 37 711 2000 10.1080/104077800274046 Analysis of conjugate heat transfer in microchannel heat sinks
Int. J. Heat Mass Transfer Qu 46 2737 2003 10.1016/S0017-9310(03)00044-9 Measurement and prediction of pressure drop in two-phase micro-channel heat sinks
Int. J. Heat Mass Transfer Lee 928 2005 10.1016/j.ijheatmasstransfer.2004.09.018 Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I - pressure drop characteristics
Int. J. Heat Mass Transfer Qu 47 2045 2004 10.1016/j.ijheatmasstransfer.2003.12.006 Measurement and correlation of critical heat flux in two-phase micro-channel heat sinks
Int. J. Heat Mass Transfer Peng 36 3421 1993 10.1016/0017-9310(93)90160-8 Forced convection and flow boiling heat transfer for liquid flowing through microchannels
ASME J. Heat Transfer Steinke 126 518 2004 10.1115/1.1778187 An experimental investigation of flow boiling characteristics of water in parallel microchannels
Adv. Heat Transfer Martin 13 1 1977 10.1016/S0065-2717(08)70221-1 Heat and mass transfer between impinging gas jets and solid surfaces
L.M. Jiji, Z. Dagan, Experimental investigation of single-phase multi-jet impingement cooling of array of microelectronic heat sources, in: Proceedings of International Symposium on Cooling Technology for Electronic Equipment, Honolulu, HI, 1987, pp. 265-283.
S.J. Downs, E.H. James, Jet impingement heat transfer - a literature survey, Paper No. 87-HT-35, ASME, New York, NY, 1987.
ASME J. Heat Transfer Wadsworth 112 891 1990 10.1115/1.2910496 Cooling of a multichip electronic module by means of confined two-dimensional jets of dielectric liquid
Int. J. Heat Mass Transfer Craft 36 2685 1993 10.1016/S0017-9310(05)80205-4 Impinging jet studies for turbulence model assessment - II. An examination of the performance of four turbulence models
Appl. Therm. Eng. Baydar 25 409 2005 10.1016/j.applthermaleng.2004.05.016 An experimental and numerical investigation on a confined impinging air jet at high Reynolds numbers
Int. J. Heat Mass Transfer Park 46 251 2003 10.1016/S0017-9310(02)00270-3 Streamline upwind numerical simulation of two-dimensional confined impinging slot jets
Bull. JSME Katto 16 1357 1973 10.1299/jsme1958.16.1357 Study of the mechanism of burn-out in boiling system of high burn-out heat flux
Int. J. Heat Mass Transfer Ma 29 1095 1986 10.1016/0017-9310(86)90140-7 Jet impingement nucleate boiling
Int. J. Heat Mass Transfer Mudawar 34 1465 1991 10.1016/0017-9310(91)90289-Q Critical heat flux from a simulated chip to a confined rectangular impinging jet of dielectric liquid
ASME J. Electron. Pack. Estes 117 323 1995 10.1115/1.2792112 Comparison of two-phase electronic cooling using free jets and sprays
ASME J. Electron. Pack. Johns 118 264 1996 10.1115/1.2792162 An ultra-high power two-phase jet-impingement avionic clamshell module
Int. J. Heat Mass Transfer Sung 49 669 2006 Experimental and numerical investigation of single-phase heat transfer using a hybrid jet impingement/micro-channel cooling scheme
Int. J. Heat Mass Transfer Sung 49 2663 2006 10.1016/j.ijheatmasstransfer.2006.01.008 Correlation of critical heat flux in hybrid jet impingement/micro-channel cooling scheme
M.K. Sung, I. Mudawar, Low temperature hybrid micro-channel/micro-jet impingement cooling - selection of cooling geometry and correlation of single-phase data, Int. J. Heat Mass Transfer, in press.
10.1016/j.ijheatmasstransfer.2007.12.016 M.K. Sung, I. Mudawar, Single-phase and two-phase heat transfer characteristics of low temperature hybrid micro-channel/micro-jet impingement cooling, Int. J. Heat Mass Transfer, in press.
Fluent 6.2.16 User’s Guide, Fluent Inc., Lebanon, NH, 2005.
Gambit 2.2.30 User’s Guide, Fluent Inc., Lebanon, NH, 2006.
Comput. Meth. Appl. Mech. Eng. Launder 3 269 1974 10.1016/0045-7825(74)90029-2 The numerical computation of turbulent flows
Patankar 1980 Numerical Heat Transfer and Fluid Flow
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.