다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
International journal of heat and mass transfer, v.51 no.15/16, 2008년, pp.3882 - 3895
Sung, M.K. , Mudawar, I.
AI-Helper
This study examines the single-phase and two-phase cooling performance of a hybrid micro-channel/micro-jet impingement cooling scheme using HFE 7100 as working fluid. This scheme consists of supplying coolant from a series of jets that deposit liquid into the micro-channels. A single-phase numerical...
IEEE Trans. - Compon. Pack. Technol. Mudawar 24 122 2001 10.1109/6144.926375 Assessment of high-heat-flux thermal management schemes
10.1016/j.ijheatmasstransfer.2008.02.023 M.K. Sung, I. Mudawar, Single-phase hybrid micro-channel/micro-jet impingement cooling, Int. J. Heat Mass Transfer, in press.
Int. J. Heat Mass Transfer Fedorov 43 399 2000 10.1016/S0017-9310(99)00151-9 Three-dimensional conjugate heat transfer in the microchannel heat sink for electronic packaging
Int. J. Heat Mass Transfer Qu 45 2549 2002 10.1016/S0017-9310(01)00337-4 Experimental and numerical study of pressure drop and heat transfer in a single-phase micro-channel heat sink
Appl. Therm. Eng. Baydar 25 2005 10.1016/j.applthermaleng.2004.05.016 An experimental and numerical investigation on a confined impinging air jet at high Reynolds numbers
Exp. Fluids Barata 15 117 1973 10.1007/BF00190951 On the analysis of an impinging jet on ground effects
Int. J. Heat Mass Transfer Craft 36 2685 1993 10.1016/S0017-9310(05)80205-4 Impinging jet studies for turbulence model assessment - II. An examination of the performance of four turbulence models
Int. J. Heat Mass Transfer Bowers 37 321 1994 10.1016/0017-9310(94)90103-1 High flux boiling in low flow rate, low pressure drop mini-channel and micro-channel heat sinks
Int. J. Heat Mass Transfer Qu 46 2737 2003 10.1016/S0017-9310(03)00044-9 Measurement and prediction of pressure drop in two-phase micro-channel heat sinks
Int. J. Heat Mass Transfer Lee 48 928 2005 10.1016/j.ijheatmasstransfer.2004.09.018 Two-phase flow in high-heat-flux micro-channel heat sink for refrigeration cooling applications: Part I - pressure drop characteristics
10.1109/EMAP.2001.984012 C. Yang, A.A.O. Tay, H. Xue, An experimental study of liquid jet impingement cooling of electronic components with and without boiling, in: Proceedings of the Advances in Electronics Material and Packaging, IEEE, November 19-22, Jeju Island, Korea, 2001, pp. 369-375.
Int. J. Heat Mass Transfer Wolf 39 1395 1996 10.1016/0017-9310(95)00216-2 Local jet impingement boiling heat transfer
ASME J. Heat Transfer Wadsworth 112 891 1990 10.1115/1.2910496 Cooling of a multichip electronic module by means of confined two-dimensional jets of dielectric liquid
Fluent 6.2.16, User’s Guide, Fluent Inc., Lebanon, NH, 2005.
Gambit 2.2.30, User’s Guide, Fluent Inc., Lebanon, NH, 2006.
Comput. Meth. Appl. Mech. Eng. Launder 3 269 1974 10.1016/0045-7825(74)90029-2 The numerical computation of turbulent flows
Patankar 1980 Numerical Heat Transfer and Fluid Flow
Incropera 1999 Liquid Cooling of Electronic Devices by Single-phase Convection
J. Fluid Mech. Watson 20 481 1964 10.1017/S0022112064001367 The radial spread of a liquid over a horizontal plane
Int. J. Heat Mass Transfer Ma 29 1095 1986 10.1016/0017-9310(86)90140-7 Jet impingement nucleate boiling
Int. J. Heat Mass Transfer Mudawar 34 1465 1991 10.1016/0017-9310(91)90289-Q Critical heat flux from a simulated chip to a confined rectangular impinging jet of dielectric liquid
Bull. JSME Katto 16 1357 1973 10.1299/jsme1958.16.1357 Study of the mechanism of burn-out in boiling system of high burn-out heat flux
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.