다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Nuclear engineering and design : an international journal devoted to the thermal, mechanical and structural problems of nuclear energy, v.238 no.12, 2008년, pp.3186 - 3193
Wang, Z.X. (Key Laboratory of Failure Mechanics, Department of Engineering Mechanics, School of Aerospace, Tsinghua University, Beijing 100084, China) , Shi, H.J. , Lu, J. , Shi, P. , Ma, X.F.
AI-Helper
Small punch (SP) tests have been performed at room temperature on round specimens with six kinds of thicknesses. Experimental results show that the SP energy, the fracture strain and the fracture toughness increase with the thickness of the SP samples. Fracture surface displays typical ductile fract...
Engineering Fracture Mechanics Abendroth 73 710 2006 10.1016/j.engfracmech.2005.10.007 Identification of ductile damage and fracture parameters from the small punch test using neural networks
Afzal Khan 491 1995 Proceedings of the Euro-Mat 95 Conference, Symposium D Computer modeling of elasto-plastic fracture mechanics of ball indentation in ductile aluminium sheet
Atkins 1985 Elastic and Plastic Fracture
Engineering Failure Analysis Bulloch 511 2002 10.1016/S1350-6307(01)00034-6 A review of the ESB small punch test data on various plant components with special emphasis on fractographic details
Engineering Failure Analysis Bulloch 11 635 2004 10.1016/j.engfailanal.2003.05.020 A study concerning material fracture toughness and some small punch test data for low alloy steels
Baik 92 1986 The Use of Small-scale Specimens for Testing Irradiated Material, ASTM STP 888 Development of small punch test for ductile-brittle transition temperature measurement of temper embrittled Ni-Cr steel
Bulloch, J.H., Hickey, J.J., 1994. Miniature Specimen Testing of Critical Components in Steam Raising Plants. Pressure Vessels and Piping Conference, Minneapolis, ASME. Conf. Service experience and reliability improvement PVP, vol. 288, pp. 147-154.
Journal of Nuclear Materials Campitelli 335 366 2004 10.1016/j.jnucmat.2004.07.052 Assessment of the constitutive properties from small ball punch test: experiment and modeling
Materials Science and Engineering A Campitelli 400-401 386 2005 10.1016/j.msea.2005.02.088 Assessment of irradiation-hardening on Eurofer97’ and Zircaloy 2 with punch tests and finite-element modelling
Int. J. Mech. Sci Chakrabarty 12 315 1970 10.1016/0020-7403(70)90085-8 A theory of stretch forming over hemispherical punch heads
Journal of Testing and Evaluation Cheon 24 255 1996 10.1520/JTE11449J Initial deformation during small punch testing
Engineering Fracture Mechanicsolume Chang 75 3413 2008 10.1016/j.engfracmech.2007.06.006 Derivation of ductile fracture resistance by use of small punch specimens
Materials Characterization Dobes 59 961 2008 10.1016/j.matchar.2007.08.006 Comparison of conventional and small punch creep tests of mechanically alloyed Al-C-O alloys
Computational Materials Science Egan 40 33 2007 10.1016/j.commatsci.2006.10.021 Small punch test: an approach to solve the inverse problem by deformation shape and finite element optimization
Journal of Nuclear Materials Finarelli 328 146 2004 10.1016/j.jnucmat.2004.04.320 Small punch tests on austenitic and martensitic steels irradiated in a spallation environment with 530MeV protons
International Journal of Pressure Vessels and Piping Fleury 75 699 1998 10.1016/S0308-0161(98)00074-X Small punch tests to estimate the mechanical properties of steels for steam power plant. I. Mechanical strength
Foulds, J.H., Jewett. C.W., 1991. Viswanathan R. Proc. Inter. Conf. Power Generation, San Diego, USA, October, paper 38.
Journal of Testing Evaluation Foulds 23 3 1995 10.1520/JTE10392J Fracture toughness by small punch testing
International Journal of Pressure Vessels and Piping Ha 75 707 1998 10.1016/S0308-0161(98)00075-1 Small punch tests to estimate the mechanical properties of steels for steam power plant. II. Fracture toughness
Journal of Nuclear Materials Hankin 258-263 1657 1998 10.1016/S0022-3115(98)00204-9 Shear punch testing of 59Ni isotopically-doped model austenitic alloys after irradiation in FFTF at different He/dpa ratios
10.1520/STP32994S Harling, O., Lee, M., Sohn, D.S., Kohse G, Lau, C.W., 1986. MIT miniaturized disk bend test , ASTM-STP-888, Am. Soc. Test. Mater. Phila., 50.
Journal of Nuclear Materials Hishinuma 258-263 193 1998 10.1016/S0022-3115(98)00395-X Current status and future R&D for reduced-activation ferritic/martensitic steels
Journal of Nuclear Materials Isselin 352 97 2006 10.1016/j.jnucmat.2006.02.076 Assessment of the constitutive law by inverse methodology: Small punch test and hardness
International Journal of Pressure Vessels and Piping Ju 80 221 2003 10.1016/S0308-0161(03)00042-5 Evaluation of fracture toughness by small-punch testing techniques using sharp notched specimens
10.1016/S0022-3115(03)00115-6 Kawai, M., 2003. Summary of third workshop on materials science and technology for the spallation neutron source at KEK, March 2002. Journal of Nuclear materials, 318, pp. 371-378.
Nuclear Engineering and Design Kim 235 1799 2005 10.1016/j.nucengdes.2005.05.014 Evaluation of ductile-brittle transition temperature before and after neutron irradiation for RPV steels using small punch tests
Metallurgical Transactions A Lucas 21A 1105 1990 10.1007/BF02698242 Review of small specimen test techniques for irradiation testing
Materials Letters Leon 56 812 2002 10.1016/S0167-577X(02)00619-5 Small punch testing for assessing the tensile strength of gradient Al/Ni-SiC composites
International Journal of Pressure Vessels and Piping Ling 84 304 2007 10.1016/j.ijpvp.2006.11.003 Creep damage in small punch creep specimens of Type 304 stainless steel
Engineering Fracture Mechanism Linse 75 3520 2008 10.1016/j.engfracmech.2007.03.047 Usage of the small-punch-test for the characterization of reactor vessel steels in the brittle-ductile transition region
Journal of Nuclear Materials Lucas 122 429 1984 10.1016/0022-3115(84)90635-4 Shear punch tests for mechanical property measurements in TEM disc-sized specimens
Journal of Nuclear Materials Lucas 141-143 532 1986 10.1016/S0022-3115(86)80096-4 Parametric analysis of the disc bend test
International Journal of Pressure Vessels and Piping Milicka 83 625 2006 10.1016/j.ijpvp.2006.07.009 Small punch testing of P91 steel
Journal of Nuclear Materials Mao 150 42 1987 10.1016/0022-3115(87)90092-4 Development of a further-miniaturized specimen of mm diameter for TEM disk small punch tests
Journal of Nuclear Materials Manahan 104 1545 1981 10.1016/0022-3115(82)90820-0 The development of a miniaturized disk bend test for the determination of postirradiation mechanical properties
10.1520/STP32993S Manahan, M.P., Browning, A.E., Argon, A.S., Harling, O.K., 1986. Miniaturized Disk Bend Test Technique Development and Application.. ASTM-STP-888, Am. Soc. Test. Mater. Phila. pp. 17-49.
Journal of Testing Evaluation Mao 15 30 1987 10.1520/JTE11549J Characterization of fracture behavior in small punch test by combined recrystallization-etch method and rigid plastic analysis
Scripta Metallurgica Mao 25 2481 1991 10.1016/0956-716X(91)90053-4 Small punch test to predict ductile fracture toughness JIC and brittle fracture toughness KIC
Journal of Nuclear Materials Misawa 150 194 1987 10.1016/0022-3115(87)90075-4 Small punch tests for evaluating ductile-brittle transition behavior of irradiated ferritic steels
Journal of Alloys and Compounds Nambu 446-447 588 2007 10.1016/j.jallcom.2007.02.063 Enhanced hydrogen embrittlement of Pd-coated niobium metal membrane detected by in situ small punch test under hydrogen permeation
Materials Science and Technology Norris 12 163 1996 10.1179/mst.1996.12.2.163 Deformation processes during disc bend loading
Journal of Nuclear materials Odette 307-311 1643 2002 10.1016/S0022-3115(02)01173-X Some recent innovations in small specimen testing
Journal of the Mechanics and Physics of Solids Pardoen 52 423 2004 10.1016/S0022-5096(03)00087-5 Mode I fracture of sheet metal
Nuclear Engineering and Design Serre 237 677 2007 10.1016/j.nucengdes.2006.07.007 Liquid metal embrittlement of T91 martensitic steel evidenced by small punch test
Cryogenics Shindo 44 789 2004 10.1016/j.cryogenics.2004.04.008 Small punch testing for determining the cryogenic fracture properties of 304 and 316 austenitic stainless steels in a high magnetic field
Journal of Nuclear Materials Wakai 356 95 2006 10.1016/j.jnucmat.2006.05.032 Effect of gas atoms and displacement damage on mechanical properties and microstructures of F82H
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.