참고문헌 (17)

1. Rohrig C, Jochheim A. Motion control of linear permanent magnet motors with force ripple compensation. In: The 3rd international symposium on linear drives for industry applications, LDIA. Nagano, Japan; 2001. 

2. 10.1109/ACC.2001.946068 Rohrig C, Jochheim A. Identification and compensation of force ripple in linear permanent magnet motors. In: Proceedings of the American control conference. Arlington, Virginia; 2001. p. 2161-6. 

   

3. Martinez G, Atencia J, Martinez-Iturralde M, Garcia Rico A, Florez J. Reduction of detent force in flat permanent magnet linear synchronous machines by means of three different methods. In: Proceedings of electric machines and drives, IEMDC, 2003. p. 1105-10. 

4. IEEE Trans Magn Li 24 11 2901 1988 Reduction of cogging torque in permanent magnet motors 

5. IEEE Trans Magn Takeo 29 2 2028 1993 10.1109/20.250808 A method of reducing ripple torque in permanent magnet motors without skewing 

   상세보기

6. IEEE Trans Magn Hor 34 5 3544 1998 10.1109/20.717836 Minimization of cogging force in a linear permanent-magnet motor 

   상세보기

7. Jeans CG, Cruise RJ, Landy CF. Methods of detent force reduction in linear synchronous motors. In: Proceedings of electric machines and drives. Washington, USA; 1999. p. 437-9. 

8. IEEE Africon Cruise 623 1999 Reduction of cogging forces in linear synchronous motors 

9. IEEE Trans Magn Inoue 36 4 1890 2000 10.1109/20.877814 An approach to a suitable stator length for minimizing the detent force of permanent magnet linear synchronous motors 

   상세보기

10. IEEE Trans Magn Lee 42 4 1367 2006 10.1109/TMAG.2006.871927 Design of thrust ripple minimization by equivalent magnetizing current considering slot effect 

    상세보기

11. IEEE Trans Magn Yoshimura 31 6 3728 1995 10.1109/20.489752 Analysis of the reduction of detent force in a permanent magnet linear synchronous motor 

    상세보기

12. Zyl AV, Landy CF. Reduction of cogging forces in a tubular linear synchronous motor by optimizing the secondary design. In: IEEE 6th Africon conference in Africa, 2002, pp. 689-92. 

13. IEE Proc - Elect Pow Appl Zhu 144 4 277 1997 10.1049/ip-epa:19971057 Reduction of cogging force in slotless linear permanent magnet motors 

    상세보기

14. Bodika N, Cruise RJ, Landy CF. Design of a PI controller to counteract the effect of cogging forces in a permanent magnet synchronous linear motor. In: IEEE proceedings of Africon, South Africa, 1999, 893-6. 

15. Kim JH, Choi JW, Sul SK. High precision position control of linear permanent magnet synchronous motor for surface mount device placement system. In: Power conversion conference, 2002, pp. 37-42. 

16. Mechatronics Braembussche 6 5 507 1996 10.1016/0957-4158(95)00090-9 Accurate tracking control of linear synchronous motor machine tool axes 

    상세보기

17. Lampaert V, Swevers J, Al-bender F. Experimental comparison of different friction models for accurate low-velocity tracking. In: Proceedings of advanced mechatronic system workshop; 2002.