최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Journal of materials processing technology, v.209 no.20, 2009년, pp.6022 - 6038
Jain, V.K. (Tel.: +91 512 2597916)
AbstractMicro-/nano-machining (abbreviated as MNM) processes are classified mainly in two classes: traditional and advanced. Majority of the traditional MNM processes are embedded abrasive or fixed geometry cutting tool type processes. Conversely, majority of the advanced MNM processes are loose flo...
Wear Ahn 257 785 2004 10.1016/j.wear.2004.03.020 Chemical mechanical polishing by colloidal silica-based slurry for micro-scratch reduction
International Journal of Modern Physics B Carlson 10 23/24 2857 1996 10.1142/S0217979296001306 Commercial magnetorheological fluid devices
IEEE Electron Device Letters Chang 17 100 1996 10.1109/55.485180 Fabrication of thin film transistors by chemical mechanical polished polycrystalline silicon films
Annals of CIRP Fox 43 1 181 1994 10.1016/S0007-8506(07)62191-X Magnetic abrasive finishing of rollers
Physical Review E Furst 61 6 6732 2000 10.1103/PhysRevE.61.6732 Micromechanics of magnetorheological suspensions
Applied Physics Letters Ginder 65 26 3410 1994 10.1063/1.112408 Shear stresses in magnetorheological fluids: role of magnetic saturation
International Journal of Machine Tools Manufacture Gorana 44 201 2004 10.1016/j.ijmachtools.2003.10.004 Experimental investigation into cutting forces and active grain density during abrasive flow machining
Wear Gorana 260 128 2006 10.1016/j.wear.2004.12.038 Forces prediction during material deformation in abrasive flow machining
Japanese Journal of Applied Physics Hayashi 35 1054 2001 10.1143/JJAP.35.1054 Ultrauniform Chemical Mechanical Polishing (CMP) using a Hydro Chuck, featured by wafer mounting on a quartz glass plate with fully flat water supported surface
Jain 2002 Advanced Machining Processes
Jain 2009 Introduction to Micromachinnig
Robotics and Computer Integrated Manufacturing Jain 15 403 1999 10.1016/S0736-5845(99)00046-0 Simulation of surface generated in abrasive flow finishing process
International Journal of Machine Tools and Manufacture Jain 39 1903 1999 10.1016/S0890-6955(99)00038-3 Modeling of material removal and surface roughness in abrasive flow machining process
Wear Jain 231 242 1999 10.1016/S0043-1648(99)00129-5 Modeling of abrasive flow machining: a neural network approach
Journal of Material Processing Technology Jain 108 62 2000 10.1016/S0924-0136(00)00621-X Optimum selection of machining conditions in abrasive flow machining using neural networks
Journal of Material Processing Technology Jain 152 17 2004 10.1016/j.jmatprotec.2003.11.024 Stochastic simulations of active grain density in abrasive flow machining
Machining Science and Technology Jain 5 2 151 2001 10.1081/MST-100107841 Evaluation of rheological properties of medium for AFM process
Wear Jain 250 384 2001 10.1016/S0043-1648(01)00642-1 Effect of working gap and circumferential speed on the performance of abrasive finishing process
Jayswal 2004 AIP Conf. Proc Analysis of magnetic abrasive finishing with slotted magnetic pole
Journal of Advanced Manufacturing Technology Jayswal 4 2 131 2005 Magnetic abrasive finishing process-a parametric analysis
International Journal of Advanced Manufacturing Technology Jayswal 26 477 2005 10.1007/s00170-004-2180-x Modeling and simulation of magnetic abrasive finishing
Jayswal, S.C., 2005. Modeling and Simulation of Magnetic Abrasive Finishing (MAF) Process. Ph.D. Thesis, Indian institute of technology, Kanpur, India.
Jha, S., 2006. Magnetorheological Abrasive Flow Finishing (MRAFF) Process. Ph.D. Thesis, Indian institute of technology, Kanpur, India.
International Journal of Machine Tools and Manufacture Jha 44 10 1019 2004 10.1016/j.ijmachtools.2004.03.007 Design and development of magnetorheological abrasive flow finishing process
International Journal of Manufacturing Technology and Management Jha 13 2-4 308 2008 10.1504/IJMTM.2008.016779 Parametric analysis of magnetorheological abrasive flow finishing (MRAFF) process
Journal of the American Ceramic Society Jhansson 72 1136 1989 10.1111/j.1151-2916.1989.tb09696.x Surface defects in polished silicon studied by cross-sectional transmission electron microscopy
Journal of Material Processing Technology Kim 71 384 1997 10.1016/S0924-0136(97)00103-9 Development of a magnetic abrasive jet machining system for internal polishing of circular tubes
AIChE Journal Klingenberg 47 2 246 2001 10.1002/aic.690470202 Magnetorheology: applications and challenges
Kohut, T., 1989. Surface finishing with abrasive flow machining. SME technical paper, 35-43.
Annals of CIRP Komanduri 46 2 545 1997 10.1016/S0007-8506(07)60880-4 Technological advances in fine abrasive processes
Annals of CIRP Komanduri 45 1 509 1996 10.1016/S0007-8506(07)63113-8 On material removal mechanisms in finishing of advanced ceramics and glasses
International Journal of Modern Physics B Kordonski 10 23/24 2837 1996 10.1142/S0217979296001288 Magnetorheological finishing
International Journal of Production Research Kremen 32 12 2817 1994 10.1080/00207549408957102 Machining time estimation for magnetic abrasive processes
Lambropoulo, S.J., Yang, F., Jacob, S.D., 1996. Optical fabrication and testing, Technical Digest Series. Optical Society of America, Washington, DC, 7, 150-153.
Microelectronic Engineering Liu 66 438 2003 10.1016/S0167-9317(02)00908-5 Investigation on the final polishing slurry and technique of silicon substrate in ULSI
IEEE Transaction on Semiconductor Manufacturing Luo 14 2 114 2001 Material removal mechanism in chemical mechanical polishing: theory and modeling
Madarkar 307 2007 Proceedings of the Conference COPEN Investigations into Magnetic abrasive microdeburring (MAMDe)
Mathur, R., Khare, Roopam, Chauhan, Vinesh, 2003. Magnetorheological Finishing of Optical Lenses, B.Tech. Project. Mechanical Eng. Dept., IIT Kanpur.
Precision Engineering Mori 9 123 1987 10.1016/0141-6359(87)90029-8 Elastic emission machining
Japan Society of Precision Engineers Mori 51 1187 2002 10.2493/jjspe1933.51.1187 Elastic emission machining - 2nd report - stress field and feasibility of introduction and activation of lattice defects
IEEE Transactions on Semiconductor Manufacturing Nanz 8 382 1995 10.1109/66.475179 Modeling of chemical-mechanical polishing: a review
AIEE Transactions Rabinow 67 1308 1948 The magnetic fluid clutch
Manufacturing Engineering Rhoades 75 1988 Abrasive flow machining
Journal of Materials Processing Technology Rhoades 28 107 1991 10.1016/0924-0136(91)90210-6 Abrasive flow machining: a case study
AIAA Journal Rosenweig 4 10 1751 1966 10.2514/3.3773 Fluid magnetic buoyancy
CIRP Annals-Manufacturing Technology Saka 57 341 2008 10.1016/j.cirp.2008.03.098 Nano-scale scratching in chemical-mechanical polishing
International Journal of Advanced Manufacturing Technology Sankar 42 678 2009 10.1007/s00170-008-1642-y Experimental investigations and modeling of drill bit-guided abrasive flow finishing (DBG-AFF) process
Wear Sankar 2009 10.1016/j.wear.2008.08.017 Experimental investigation and mechanism of material removal in nano finishing of MMCs using abrasive flow finishing (AFF) process
Journal of Japan Society of Precision Engineering Shinmura 53 11 1791 1987 10.2493/jjspe.53.1791 Study on magnetic abrasive finishing-characteristics of finished surface
Singh, D.K., 2005. Investigations into Magnetic Abrasive Finishing of Plane Surfaces. Ph.D. Thesis. Indian Institute of Technology, Kanpur, India.
Machining Science and Technology Singh 9 601 2005 10.1080/10910340500398217 On the performance analysis of flexible magnetic abrasive brush
Wear Singh 259 1254 2005 10.1016/j.wear.2005.02.030 Analysis of surface texture generated by a flexible magnetic abrasive brush
International Journal of Advanced Manufacturing Technology Singh 30 652 2006 10.1007/s00170-005-0118-6 Experimental investigations into forces acting during magnetic abrasive finishing
Annals of CIRP Tani 33 217 1984 10.1016/S0007-8506(07)61412-7 Development of high-efficient fine finishing process using magnetic fluid
Annals of CIRP Tsuwa 28 1 193 1979 Numerically controlled elastic emission machining
International Journal of Machine Tools and Manufacture Umehara 46 151 2005 10.1016/j.ijmachtools.2005.04.015 A new apparatus for finishing large size/large batch silicon nitride (Si3N4) balls for hybrid bearing applications by magnetic float polishing (MFP)
Annals of CIRP Venkatesh 44 2 611 1995 10.1016/S0007-8506(07)60508-3 Observation on polishing and ultra precision machining of semiconductor substrate materials
Journal of American Ceramic Society Vora 65 C140 1982 10.1111/j.1151-2916.1982.tb10517.x Mechano-chemical polishing of silicon nitride
Materials Science in Semiconductor Processing Wenski 5 375 2002 10.1016/S1369-8001(02)00125-7 Double side polishing-a technology mandatory for 300mm wafer manufacturing
Wear Yamaguchi 1999 10.1016/S0043-1648(99)00013-7 Study of the surface modification resulting from an internal magnetic abrasive finishing process
Precision Engineering Yamaguchi 28 135 2004 10.1016/j.precisioneng.2003.07.001 Internal finishing process for alumina ceramic components by a magnetic field assisted finishing process
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.