최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Polymers & polymer composites, v.18 no.3, 2010년, pp.123 - 131
Guchhait, Prasanta K. (Rubber Technology Centre, Indian Institute of Technology, Kharagpur-721302, India) , Pradhan, Sudip (Rubber Technology Centre, Indian Institute of Technology, Kharagpur-721302, India) , Kumar, K. Dinesh (Rubber Technology Centre, Indian Institute of Technology, Kharagpur-721302, India) , Maji, Pradip K. (Rubber Technology Centre, Indian Institute of Technology, Kharagpur-721302, India) , Bhowmick, Anil K. (Rubber Technology Centre, Indian Institute of Technology, Kharagpur-721302, India)
Addition of nanoclay particles to a typical tertiary amine cured polysulfide modified epoxy adhesive leads to large increase in the single-lap shear strength of aluminum-aluminum joint. The nanoclay particles are very well dispersed (near fully exfoliated) in the polymer matrix even at 8 wt.% of na...
Sultan, Jacques N., McGarry, Frederick J.. Effect of rubber particle size on deformation mechanisms in glassy epoxy. Polymer engineering and science, vol.13, no.1, 29-34.
Treatise on adhesion and adhesives Bolger J.C. 2 1973
McGarry, F. J., Rosner, R. B.. Epoxy-Rubber Interactions. Advances in chemistry series, vol.233, 305-.
Kinloch, A.J., Shaw, S.J., Tod, D.A., Hunston, D.L.. Deformation and fracture behaviour of a rubber-toughened epoxy: 1. Microstructure and fracture studies. Polymer, vol.24, no.10, 1341-1354.
Bertozzi, Eugene R.. Chemistry and Technology of Elastomeric Polysulfide Polymers. Rubber chemistry and technology, vol.41, no.1, 114-160.
Wilford, A., Lee, T.C.P., Kemp, T.J.. Phase separation of polysulphide polymers in epoxy adhesives. International journal of adhesion and adhesives, vol.12, no.3, 171-177.
Ramaswamy, R., Achary, P. Sasidharan. Adhesion Development in a Polysulphide Sealant. The Journal of adhesion, vol.11, no.4, 305-313.
Handbook of Elastomers - Second Edition Bhowmick A.K. 2001
Epoxy Resins: Chemistry and Technology May C.A. 1973
Kornmann, X., Berglund, L. A., Sterte, J., Giannelis, E. P.. Nanocomposites based on montmorillonite and unsaturated polyester. Polymer engineering and science, vol.38, no.8, 1351-1358.
Calvert, Paul. A recipe for strength. Nature, vol.399, no.6733, 210-211.
Kinloch, A. J., Lee, J. H., Taylor, A. C., Sprenger, S., Eger, C., Egan, D.. TOUGHENING STRUCTURAL ADHESIVES VIA NANO- AND MICRO-PHASE INCLUSIONS. The Journal of adhesion, vol.79, no.8, 867-873.
Gilman, J. W., Jackson, C. L., Morgan, A. B., Harris Jr., R., Manias, E., Giannelis, E. P., Wuthenow, M., Hilton, D., Phillips, S. H.. Flammability Properties of Polymer−Layered-Silicate Nanocomposites. Polypropylene and Polystyrene Nanocomposites. Chemistry of materials : a publication of the American Chemical Society, vol.12, no.7, 1866-1873.
Kojima, Yoshitsugu, Usuki, Arimitsu, Kawasumi, Masaya, Okada, Akane, Fukushima, Yoshiaki, Kurauchi, Toshio, Kamigaito, Osami. Mechanical properties of nylon 6-clay hybrid. Journal of materials research, vol.8, no.5, 1185-1189.
Messersmith, Phillip B., Giannelis, Emmanuel P.. Synthesis and barrier properties of poly(ε‐caprolactone)‐layered silicate nanocomposites. Journal of polymer science. Part A, Polymer chemistry, vol.33, no.7, 1047-1057.
Maiti, Madhuchhanda, Bhattacharya, Mithun, Bhowmick, Anil K.. Elastomer Nanocomposites. Rubber chemistry and technology, vol.81, no.3, 384-469.
Sadhu, Susmita, Bhowmick, Anil K.. Preparation and properties of nanocomposites based on acrylonitrile–butadiene rubber, styrene–butadiene rubber, and polybutadiene rubber. Journal of polymer science Part B, Polymer physics, vol.42, no.9, 1573-1585.
Maiti, Madhuchhanda, Bhowmick, Anil K.. Structure and properties of some novel fluoroelastomer/clay nanocomposites with special reference to their interaction. Journal of polymer science Part B, Polymer physics, vol.44, no.1, 162-176.
Ganguly, Anirban, De Sarkar, Mousumi, Bhowmick, Anil K.. Thermoplastic elastomeric nanocomposites from poly[styrene–(ethylene-co-butylene)–styrene] triblock copolymer and clay: Preparation and characterization. Journal of applied polymer science, vol.100, no.3, 2040-2052.
Sahoo, Suchismita, Bhowmick, Anil K.. Influence of ZnO nanoparticles on the cure characteristics and mechanical properties of carboxylated nitrile rubber. Journal of applied polymer science, vol.106, no.5, 3077-3083.
Bhattacharya, M., Bhowmick, A.K.. Polymer-filler interaction in nanocomposites: New interface area function to investigate swelling behavior and Young's modulus. Polymer, vol.49, no.22, 4808-4818.
Lan, Tie, Pinnavaia, Thomas J.. Clay-Reinforced Epoxy Nanocomposites. Chemistry of materials : a publication of the American Chemical Society, vol.6, no.12, 2216-2219.
Polymer clay nanocomposites Pinnavaia T.J. 2001
Boo, W.J., Sun, L., Warren, G.L., Moghbelli, E., Pham, H., Clearfield, A., Sue, H.J.. Effect of nanoplatelet aspect ratio on mechanical properties of epoxy nanocomposites. Polymer, vol.48, no.4, 1075-1082.
Balakrishnan, S., Start, P.R., Raghavan, D., Hudson, S.D.. The influence of clay and elastomer concentration on the morphology and fracture energy of preformed acrylic rubber dispersed clay filled epoxy nanocomposites. Polymer, vol.46, no.25, 11255-11262.
Boukerrou, Amar, Duchet, Jannick, Fellahi, Said, Kaci, Mustapha, Sautereau, Henry. Morphology and mechanical and viscoelastic properties of rubbery epoxy/organoclay montmorillonite nanocomposites. Journal of applied polymer science, vol.103, no.6, 3547-3552.
Kinloch, A. J., Taylor, A. C.. The mechanical properties and fracture behaviour of epoxy-inorganic micro- and nano-composites. Journal of materials science, vol.41, no.11, 3271-3297.
Kinloch, A. J., Taylor, A. C.. The toughening of cyanate-ester polymers Part I Physical modification using particles, fibres and woven-mats. Journal of materials science, vol.37, no.3, 433-460.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.