최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials & design, v.32 no.4, 2011년, pp.1948 - 1956
Parimi, A.K. , Robi, P.S. , Dwivedy, S.K.
Severe plastic deformation studies of copper and Al-Cu alloy by multiple channel-die compression tests were investigated. The materials were tested under plane strain condition by maintaining a constant strain rate of 0.001/s. Extensive grain refinement was observed resulting in nano-sized grains af...
Prog Mater Sci Valiev 45 103 2000 10.1016/S0079-6425(99)00007-9 Bulk nano-structured materials from severe plastic deformation
Scripta Mater Saito 39 1221 1998 10.1016/S1359-6462(98)00302-9 Ultra-fine grained bulk aluminium produced by accumulative roll-bonding process
Vorhauer 684 2004 Nanomaterials by severe plastic deformation The influence of type and path of deformation on the microstructural evolution during severe plastic deformation
Salishchev 691 2004 Nanomaterials by severe plastic deformation Formation of a submicrocrystalline structure I titanium during successive uniaxial compression in three orthogonal directions
Phys Status Solidi A Li 202 119 2005 10.1002/pssa.200521160 Strain rate sensitivity of Cu after severe plastic deformation by multiple compression
Mater Sci Eng A Li 483-484 547 2008 On the elevated temperature deformation behavior of polycrystalline Cu subjected to predeformation by multiple compression
Acta Mater Li 52 5009 2004 10.1016/j.actamat.2004.07.003 Transition from strengthening to softening by grain boundaries in ultrafine-grained Cu
Scripta Mater Kundu 58 235 2008 10.1016/j.scriptamat.2007.09.046 Severe plastic deformation of copper using multiple compression in a channel die
Scripta Mater Zhu 51 825 2004 10.1016/j.scriptamat.2004.05.006 Performance and applications of nanostructured materials produced by severe plastic deformation
Scripta Mater Sauvage 58 1125 2008 10.1016/j.scriptamat.2008.02.010 Nanostructure and properties of a Cu-Cr composite processed by severe plastic deformation
Acta Metall Nourbakhsh 34 1083 1986 10.1016/0001-6160(86)90218-X High strain plane-strain deformation of 70-30brass in a channel die
Acta Mater Torre 52 4819 2004 10.1016/j.actamat.2004.06.040 Microstructures and properties of copper processed by equal channel angular extrusion for 1-16passes
Ghosh AK. Method for producing a fine-grain Aluminium alloy using three axis deformation. US Patent 4721537; 1988.
Mater Sci Eng A Vanderesse 476 322 2008 10.1016/j.msea.2007.04.118 Channel die compression at high temperature
Acta Mater Kapoor 55 5408 2007 10.1016/j.actamat.2007.05.049 Deformation behavior of an ultrafine-grained Al-Mg alloy produced by equal-channel angular pressing
Mater Sci Eng A Wang 375-377 46 2004 10.1016/j.msea.2003.10.214 Strain hardening, strain rate sensitivity, and ductility of nanostructured metals
Wadsack 655 2004 Nanomaterials by severe plastic deformation Development of microstructure and thermal stability of nanostructured chromium processed by SPD
Mater Des Kucukomeroglu 31 782 2010 10.1016/j.matdes.2009.08.004 Effect of equal-channel angular extrusion on mechanical and wear properties of eutectic Al-12Si alloy
ASM Handbook, Alloy Phase Diagrams, vol. 03. ASM International; 1992.
Cullity 1978 Elements of X-ray diffraction
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.