최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기IEEE transactions on power electronics, v.21 no.5, 2006년, pp.1225 - 1234
Xinke Wu (Coll. of Electr. Eng., Zhejiang Univ., Hangzhou) , Junming Zhang , Xiaogao Xie , Zhaoming Qian
This paper proposes an improved full bridge dc-dc converter, which can achieve zero-voltage-switching (ZVS) with wide input voltage range and load range. The operation principle of the converter and the optimal design considerations for high efficiency and ZVS range are analyzed. By adding two clamp...
Watson, R., Lee, F.C.. Analysis, design, and experimental results of a 1-kW ZVS-FB-PWM converter employing magamp secondary-side control. IEEE transactions on industrial electronics : a publication of the IEEE Industrial Electronics Society, vol.45, no.5, 806-814.
Jain, P.K., Kang, Wen, Soin, H., Xi, Youhao. Analysis and design considerations of a load and line independent zero voltage switching full bridge DC/DC converter topology. IEEE transactions on power electronics, vol.17, no.5, 649-657.
Ayyanar, R., Mohan, N.. A novel full-bridge DC-DC converter for battery charging using secondary-side control combines soft switching over the full load range and low magnetics requirement. IEEE transactions on industry applications, vol.37, no.2, 559-565.
Proc APEC a 1-kw, 500-khz front-end converter for a distributed power supply system weene 1989 423
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.