다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
ISIJ international, v.51 no.1, 2011년, pp.145 - 150
Asoo, Kazuya (Graduate Student, Graduate School of Science and Engineering, Ibaraki University) , Tomota, Yo (Graduate School of Science and Engineering) , Harjo, Stefanus (MLF) , Okitsu, Yoshitaka (Automobile R&D Center, Honda R&D Co., Ltd.)
AI-Helper
Tensile behavior of a nano-TRIP steel with 0.4 μm grain size showing tensile strength of 1326 MPa and total elongation of 23% was studied under in situ neutron diffraction. In spite of ultrafine grained structure, this steel realized a high work-hardening leading to a sufficient amount of uniform...
1359-6462 Scr. Mater. Y. Yu, P. W. Lao and C. P. Chang 53 4019 2005
Tsuji, N, Ito, Y, Saito, Y, Minamino, Y. Strength and ductility of ultrafine grained aluminum and iron produced by ARB and annealing. Scripta materialia, vol.47, no.12, 893-899.
Tsuchida, Noriyuki, Fukaura, Kenzo, Nagai, Kotobu, Tomota, Yo. Flow Stress Analysis using the Kocks–Mecking Model for Ferrite–Cementite Steels with Various Ferrite Grain Sizes. ISIJ international, vol.48, no.7, 1020-1025.
Tomota, Yo, Narui, Akinori, Tsuchida, Noriyuki. Tensile Behavior of Fine-grained Steels. ISIJ international, vol.48, no.8, 1107-1113.
1359-6454 Acta Mater. Y. M. Wang and E. Ma 62 1699 2004
0021-3764 Bull. JSME J.-H. Li and Y. Tomota 75 761 2009
7) Y. Okitsu and N. Tsuji: Proceedings of the 2nd International Symposium on Steel Science (ISSS 2009), The Iron and Steel Institute of Japan, (2009), 253.
Okitsu, Yoshitaka, Takata, Naoki, Tsuji, Nobuhiro. A new route to fabricate ultrafine-grained structures in carbon steels without severe plastic deformation. Scripta materialia, vol.60, no.2, 76-79.
10.4028/www.scientific.net/MSF.652.99 9) S. Harjo, K. Aizawa, T. Ito, H. Arima, J. Abe, A. Moriai, K. Sakasai, T. Nakamura, T. Nakatani, T. Iwahashi and T. Kamiyama: Mater. Sci. Forum , 652 (2010), 99.
0021-3764 Bull. JSME A. Narui, S.-C. Chen, Y. Tomota and 75 501 2009
10.1007/BF02647665 11) R. L. Miller: Metall. Trans. , 3 (1972), 905.
12) Y. Tomota: unpublished work at Ibaraki University, (2008).
0021-1583 Trans. Iron Steel Inst. Jpn. Y. Tomota, K. Tanabe, K. Kuroki and 17 159 1977 10.2355/isijinternational1966.17.159
14) V. F. Zackay, E. R. Parker, D. Fahr and R. Bush: Trans. Am. Soc. Met. , 60 (1967), 252.
0003-6951 Appl. Phys. Lett. K. Tao, H. Choo, H. Li, B. Clausen, 90 101911 2007 10.1063/1.2711758
Tomota, Y., Tokuda, H., Adachi, Y., Wakita, M., Minakawa, N., Moriai, A., Morii, Y.. Tensile behavior of TRIP-aided multi-phase steels studied by in situ neutron diffraction. Acta materialia, vol.52, no.20, 5737-5745.
17) Z. Nishiyama: Martensite Transformation, Maruzen, Tokyo, (1971), 13.
1073-5623 Metall. Mater. Trans. A Z. G. Cong, N. Jia, X. Sun, Y. Ren, 40A 1383 2009
Jia, N., Cong, Z.H., Sun, X., Cheng, S., Nie, Z.H., Ren, Y., Liaw, P.K., Wang, Y.D.. An in situ high-energy X-ray diffraction study of micromechanical behavior of multiple phases in advanced high-strength steels. Acta materialia, vol.57, no.13, 3965-3977.
1073-5623 Metall. Mater. Trans. A S. Cheng, X. L. Wang, Z. Feng, B. C 39A 3105 2008
Muransky, O., Sittner, P., Zrnik, J., Oliver, E.C.. In situ neutron diffraction investigation of the collaborative deformation-transformation mechanism in TRIP-assisted steels at room and elevated temperatures. Acta materialia, vol.56, no.14, 3367-3379.
Zaefferer, S., Ohlert, J., Bleck, W.. A study of microstructure, transformation mechanisms and correlation between microstructure and mechanical properties of a low alloyed TRIP steel. Acta materialia, vol.52, no.9, 2765-2778.
Jacques, P.J., Furnemont, Q., Lani, F., Pardoen, T., Delannay, F.. Multiscale mechanics of TRIP-assisted multiphase steels: I. Characterization and mechanical testing. Acta materialia, vol.55, no.11, 3681-3693.
10.4028/www.scientific.net/MSF.404-407.489 24) E. Oliver, M. R. Daymond, P. J. Withers and T. Mori: Mater. Sci. Forum , 404-407 (2002), 489.
0021-1575 Tetsu-to-Hagané IKEDA KEITA 91 11 822 2005 10.2355/tetsutohagane1955.91.11_822
0025-5416 Mater. Sci. Eng. M. Ojima, Y. Adachi, Y. Tomota, K. A527 16 2009
0025-5416 Mater. Sci. Eng. N. Tsuchida and Y. Tomota A285 345 2000
Bouquerel, J., Verbeken, K., De Cooman, B.C.. Microstructure-based model for the static mechanical behaviour of multiphase steels. Acta materialia, vol.54, no.6, 1443-1456.
Lani, F., Furnemont, Q., Van Rompaey, T., Delannay, F., Jacques, P.J., Pardoen, T.. Multiscale mechanics of TRIP-assisted multiphase steels: II. Micromechanical modelling. Acta materialia, vol.55, no.11, 3695-3705.
10.1007/s11661-008-9649-4 30) K. S. Choi, W. N. Liu, X. Sun, M. A. Khaleel, Y. Ren and Y. D. Wang: Metall.Trans. , 39A (2008), 3089.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
출판사/학술단체 등이 한시적으로 특별한 프로모션 또는 일정기간 경과 후 접근을 허용하여, 출판사/학술단체 등의 사이트에서 이용 가능한 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.