다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Journal of materials processing technology, v.211 no.10, 2011년, pp.1590 - 1598
Devillez, A. (Laboratoire d'Etudes des Microstructures et de Mecanique des Materiaux, UMR CNRS No. 7239, Universite de Metz, Ile du Saulcy, 57045 Metz, France) , Le Coz, G. , Dominiak, S. , Dudzinski, D.
AI-Helper
In the machining of Inconel 718, nickel based heat resistant superalloy and classified difficult-to-cut material, the consumption of cooling lubricant is very important. To reduce the costs of production and to make the processes environmentally safe, the goal is to move toward dry cutting ...
Journal of Materials Processing Technology Axinte 127 325 2002 10.1016/S0924-0136(02)00282-0 Surface integrity of hot work tool steel after high speed milling experimental data and empirical models
International Journal of Machine tools and Manufacture Arunachalam 44 1481 2004 10.1016/j.ijmachtools.2004.05.005 Surface integrity when machining age hardened Inconel 718 with coated cutting tools
Annals of the CIRP Brinkmeier 31 2 491 1982 10.1016/S0007-8506(07)60172-3 Residual stresses, measurement and causes in machining processes
Surface and Coatings Technology Ducros 163-164 681 2003 10.1016/S0257-8972(02)00656-4 Deposition characterization and machiing performance of multilayer PVD coatings on cemented carbide cutting tools
Wear Devillez 262 931 2007 10.1016/j.wear.2006.10.009 Cutting forces and wear in dry machining of Inconel 718 with coated carbide tools
International Journal of Machine Tools and Manufacture Dudzinski 44 Issue 4 439 2004 10.1016/S0890-6955(03)00159-7 A review of developments towards dry and high speed machining of Inconel 718 alloy
Derrien 1997 Proceedings of the 1st French and German Conference on High Speed Machining High speed milling of difficult to machine alloys
Journal of Materials Processing Technology Ezugwu 86 1 1999 10.1016/S0924-0136(98)00314-8 The machinability of nickel-based alloys: a review
Journal of Materials Processing Technology Ezugwu 55 63 1995 10.1016/0924-0136(95)01786-0 Surface abuse when machining cast iron (G-17) and nickel base superalloy (Inconel 718) with ceramic tools
Annals of CIRP Field 20 2 153 1971 Review of surface integrity of machined components
Journal of Materials Processing Technology Gunnberg 174 82 2006 10.1016/j.jmatprotec.2005.02.262 The influence of cutting parameters on residual stresses and surface topography during hard turning of 18MnCr5 case carburised steel
Machining Science and Technology Guo 13 437 2009 10.1080/10910340903454922 Surface integrity characterization and prediction in machining of hardened and difficult-to-machine alloys: a state-of-art research review and analysis
Guerville 201 2002 Metal Cutting and High Speed Machining Influence of machining conditions on residual stresses
International Journal of Machine Tools and Manufacture Jeong 42 1559 2002 10.1016/S0890-6955(02)00082-2 Estimating cutting force from rotating and stationary feed motor currents on a milling machine
Journal of Material Processing Technology Kamata 192-193 281 2007 10.1016/j.jmatprotec.2007.04.052 High speed MQL finish-turning of Inconel 718 with different coated tools
International Journal of Machine Tools and Manufacture Kishawy 39 1017 1999 10.1016/S0890-6955(98)00084-4 Effects of process parameters on material side flow during hard turning
Wear Li 231 172 1999 10.1016/S0043-1648(99)00130-1 Drill wear monitoring based on current signals
Ng 191 2002 Metal Cutting and High Speed Machining High speed ball nose end milling of Inconel 718 with variable tool geometry, experimental and finite element analysis
CIRP Annals - Manufacturing Technology Outeiro 57 77 2008 10.1016/j.cirp.2008.03.076 Analysis of residual stresses induced by dry turning of difficult-to-machine materials
International Journal of Machine tools and Manufacture Pawade 48 15 2008 10.1016/j.ijmachtools.2007.08.004 Effect of machining parameters and cutting edge geometry on surface of high speed turned Inconel 718
Materials Science Forum Schlauer 404-407 173 2002 10.4028/www.scientific.net/MSF.404-407.173 Residual stresses in a nickel-based superalloy introduced by turning
Journal of Processing Technology Sharman 173 359 2006 10.1016/j.jmatprotec.2005.12.007 An analysis of the residual stresses generated in Inconel 718 when turning
Journal of Engineering Manufacture Sharman 222 653 2008 10.1243/09544054JEM936 Surface integrity and tool life when turning Inconel 718 using ultra-high pressure and flood coolant systems
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 공개 리포지터리에 출판본, post-print, 또는 pre-print를 셀프 아카이빙 하여 자유로운 이용이 가능한 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.