다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Applied thermal engineering, v.31 no.17/18, 2011년, pp.3989 - 3995
Li, X.P. (College of Engineering, Zhejiang Normal University, Jinhua 321004, PR China) , Gong, N.N. , Guan, Y.J. , Cheng, G.M.
AI-Helper
Rapid electric heating cycle injection molding technology has been used widely in injection engineering application. Using this technology, excellent products with no weld marks, flow marks and other surface defects can be produced. However, as the special mold structure and its worse wo...
Rheol. Acta. Nguyen-Chung 43 240 2004 10.1007/s00397-003-0339-2 Flow analysis of the weld line formation during injection mold filling of thermoplastics
J. Appl. Polymer. Sci. Lim 108 3632 2008 10.1002/app.27316 Weld line characteristics of PC/ABS blend
Polym. Eng. Sci. Kang 47 922 2007 10.1002/pen.20776 Finite element analysis for wavelike flow marks in injection molding
Chen 2001 Rapid mold surface heating/cooling using electromagnetic technology
Polym. Advan. Technol. Zhao 22 476 2011 10.1002/pat.1536 Research and application of a new rapid heat cycle molding with electric heating and coolant cooling to improve the surface quality of large LCD TV panels
Int. J. Adv. Manuf. Technol. Theilade 33 157 2007 10.1007/s00170-006-0732-y Surface microstructure replication in injection molding
Microsyst. Technol. Kim 14 1581 2008 10.1007/s00542-007-0553-4 Experimental characterization of transcription properties of microchannel geometry fabricated by injection molding based on Taguchi method
Mater. Sci. Eng. A Yu 460-461 288 2007 10.1016/j.msea.2007.02.036 Micro-injection molding with the infrared assisted heating system
Appl. Therm. Eng. Mao 30 1438 2010 10.1016/j.applthermaleng.2010.03.003 Thermal/structural analysis of radiators for heavy-duty trucks
Int. J. Fatig. Zhang 31 468 2009 10.1016/j.ijfatigue.2008.07.003 Effect of units in different sizes on thermal fatigue behavior of 3Cr2W8V die steel with biomimetic non-smooth surface
Appl. Therm. Eng. Illes 30 1523 2010 10.1016/j.applthermaleng.2010.02.016 Distribution of the heat transfer coefficient in convection reflow oven
Int. J. Pres. Ves. Pip. Eslami 82 522 2005 10.1016/j.ijpvp.2005.01.002 Thermal and mechanical stresses in a functionally graded thick sphere
Appl. Therm. Eng. Wang 29 2350 2009 10.1016/j.applthermaleng.2008.11.022 A study on thermal stress deformation using analytical methods based on the temperature distribution of storage material in a rotary air-preheater
Int. J. Adv. Manuf. Tech. Li 45 261 2009 10.1007/s00170-009-1969-z Research on thermal stress, deformation, and fatigue lifetime of the rapid heating cycle injection mold
J. Appl. Polymer. Sci. Chen 101 1174 2006 10.1002/app.24070 Dynamic mold surface temperature control using induction heating and its effects on the surface appearance of weld line
Int. Comm. Heat Mass. Tran Chang 49 3846 2006 10.1016/j.ijheatmasstransfer.2006.04.014 Simulation of infrared rapid surface heating for injection molding
Mater. Des. Li 30 4317 2009 10.1016/j.matdes.2009.04.016 Optimal design of heating channels for rapid heating cycle injection mold based on response surface and genetic algorithm
Rohsenow 1973 Handbook of heat transfer
Luo 1981 Application and analysis of heat transfer
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.