최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Metallurgical transactions, v.3 no.5, 1972년, pp.1043 - 1054
Speich, G. R. , Leslie, W. C.
AbstractTempering of martensitic steels involves the segregation of carbon, the precipitation of carbides, the decomposition of retained austenite, and the recovery and recrystallization of the martensitic structure. Because these several reactions overlap and occur on such a fine scale, it is only ...
M. A. Grossman 1931 High Speed Steel M. A. Grossman and E. C. Bain:High Speed Steel, John Wiley, London, 1931.
E. C. Bain 1939 Functions of the Alloying Elements in Steel E. C. Bain:Functions of the Alloying Elements in Steel, ASM, 1939, Cleveland, Ohio; 2nd Edition co-authored with H. W. Paxton, 1961.
J. Iron SteelInst. E.C. Bain 181 193 1955 E.C. Bain:J. Iron SteelInst., 1955, vol. 181, pp. 193-212.
J. Iron Steel Inst. G. R. Speich 203 480 1965 G. R. Speich and P. R. Swann:J. Iron Steel Inst., 1965, vol. 203, pp. 480-85; G. R. Speich and H. Warlimont:J. Iron Steel Inst., 1968, vol. 206, pp. 385-92.
Trans. ASM A. R. Marder 60 651 1967 A. R. Marder and G. Krauss:Trans. ASM, 1967, vol. 60, pp. 651-59;Trans. ASM, 1969, vol. 62, pp. 957-63.
Trans. TMS-AIME J. D. Embury 236 1252 1966 J. D. Embury, A. S. Keh, and R. M. Fisher:Trans. TMS-AIME, 1966, vol. 236, pp. 1252-60.
G. R. Speich: private communication, E. C. Bain Laboratory, U. S. Steel Corp., Monroeville, Pa., April 1971.
Trans. ASM A. B. Greninger 30 1 1942 A. B. Greninger and A. R. Troiano:Trans. ASM, 1942, vol. 30, pp. 1-26.
J. Iron Steel Inst M. J. Bibby 202 100 1964 M. J. Bibby and J. Gordon Parr:J. Iron Steel Inst, 1964, vol. 202, pp. 100-04.
Japan Inst. Metals M. Cohen 9 XXIII 1968 M. Cohen:Japan Inst. Metals, Spec. Supp., 1968, vol. 9, pp. XXIII-XXIX; D. Kalish and M. Cohen:Mater. Sci. Eng, 1970, vol. 6, pp. 156-66.
J.D.Baird: Metals Mater, 1971, vol. 5, pp. l-18;IronSteel, 1963, vol. 36, p. 186.
Trans. TMS-AIME G. R. Speich 245 2553 1969 G. R. Speich:Trans. TMS-AIME, 1969, vol. 245, pp. 2553-64.
W. S. Owen 167 1965 High Strength Materials W. S. Owen, E. A. Wilson and T. Bell:High Strength Materials, John Wiley, pp. 167-205, New York, 1965.
Rev. Met. Mem. Soc. G. V. Kurdjumov 64 99 1967 G. V. Kurdjumov:Rev. Met. Mem. Soc., 1967, vol. 64, pp. 99-110.
Fiz. Metal. Metalloved. G. V. Kurdjumov 24 909 1967 G. V. Kurdjumov:Fiz. Metal. Metalloved., 1967, vol. 24, pp. 909-17.
Fiz. Metal. Metalloved. S. 0. Suvorova 17 105 1964 S. 0. Suvorova, V. I. Sarrak, and R. I. Entin:Fiz. Metal. Metalloved., 1964, vol. 17, pp. 105-11;Doklady Akad. Nauk SSSR, 1963, vol. 4, p. 156.
Trans. TMS-AIME J. M. R. Genin 242 1419 1968 J. M. R. Genin and P. R. Flinn:Trans. TMS-AIME, 1968, vol. 242, pp. 1419-30.
Trans. ASM G. Winchell 55 347 1962 G. Winchell and M. Cohen:Trans. ASM, 1962, vol. 55, pp. 347-61.
Fiz. Metal. Metalloved V. I. Izotov 25 98 1968 V. I. Izotov and L. M. Utevskii:Fiz. Metal. Metalloved, 1968, vol. 25, pp. 98-100.
Fiz. Tverd. Tela. A. G. Khachaturyan 9 2861 1967 A. G. Khachaturyan:Fiz. Tverd. Tela., 1967, vol. 9, pp. 2861-69;Doklady Akad. Nauk SSSR, 1965, vol. 165, pp. 551-54.
ActaMet R. A. Johnson 15 513 1967 R. A. Johnson:ActaMet, 1967, vol. 15, pp. 513-17.
ActaMet. R.A. Johnson 13 1259 1965 R.A.Johnson:ActaMet., 1965, vol. 13, pp. 1259-62.
ActaMet D. W. Hoffman 13 819 1970 D. W. Hoffman:ActaMet, 1970, vol. 13, pp. 819-33.
Acta Met M. G. H. Wells 12 389 1964 10.1016/0001-6160(64)90009-4 M. G. H. Wells:Acta Met, 1964, vol. 12, pp. 389-99.
F. W. Langer 1967 An Investigation of the Quench Aging Process in Iron F. W. Langer: An Investigation of the Quench Aging Process in Iron, Department of Metallurgy, Technical University, Denmark, 1967;Metal Sci. J., 1968, vol. 2, pp. 59-66.
Met. Trans. H. W. Wagenblast 1 2299 1970 10.1007/BF02643448 H. W. Wagenblast and R. Glenn:Met. Trans., 1970, vol. 1, pp. 2299-2304.
W. C. Leslie 337 1965 Mechanical Working of Steel II W. C. Leslie and A. S. Keh:Mechanical Working of Steel II, pp. 337-77, Gordon and Breach, N.Y., 1965.
J. Phys. Soc. Japan H. Ino 25 88 1968 10.1143/JPSJ.25.88 H. Ino, T. Mouya, E. Fujita, Y. Maeda, Y. Oni, and Y. Inokuti:J. Phys. Soc. Japan, 1968, vol. 25, pp. 88-99.
Nature K. H. Jack 212 248 1966 10.1038/212248b0 K. H. Jack and S. Wild:Nature, 1966, vol. 212, pp. 248-50.
ActaMet W. C. Leslie 7 632 1959 W. C. Leslie, R. M. Fisher, and N. Sen:ActaMet, 1959, vol. 7, pp. 632-44.
Rev. Univ. Mines A. Lutts 19 325 1963 A. Lutts:Rev. Univ. Mines, 1963, vol. 19, pp. 325-41.
Can. Met. Quart A. Galibois 6 21 1967 10.1179/cmq.1967.6.2.121 A. Galibois and A. Dubé:Can. Met. Quart, 1967, vol. 6, pp. 21-36.
J. Iron SteelInst C. Leslie W. 200 622 1962 W. C. Leslie, E. Hornbogen and G. E. Dieter:J. Iron SteelInst, 1962, vol. 200, pp. 622-33.
Trans. TMS-AIME G. S. Ansell 227 1080 1963 G. S. Ansell and A. Arrot:Trans. TMS-AIME, 1963, vol. 227, pp. 1080-82.
Trans. ASM G. S. Ansell 58 110 1965 G. S. Ansell and E. M. Breinan:Trans. ASM, 1965, vol. 58, pp. 110-13.
Jap. Inst. Metals G. S. Ansell 9 933 1968 G. S. Ansell, V. I. Lizunov, and R. W. Messier:Jap. Inst. Metals Spec. Supp., 1968, vol. 9, pp. 933-39.
J. Iron Steel Inst K. Kuo 184 258 1956 K. Kuo:J. Iron Steel Inst, 1956, vol. 184, pp. 258-68.
G. R. Speich, D. Dabkowski, and L. F. Porter:Met. Trans., 1972, to be pub-lished.
R. W. K. Honeycombe and A. K. Seal:Precipitation Processes in Steels, Iron Steel Inst., Spec. Rep. No. 64, 1959, pp. 44-56.
R. W. K. Honeycombe:Metallography 1963, Iron Steel Inst., Spec. Rep. No. 80, 1964, pp. 246-305.
R. W. K. Honeycombe:Metallurgical Developments in High-Alloy Steels, Iron Steel Inst, Spec. Rep. No. 86, 1964, pp. 1-14.
R. W. K. Honeycombe, H. J. Harding, and J. T. Irani:High Strength Materials, pp. 213-50, John Wiley, 1965.
Trans. ASM V. K. Chandhok 56 677 1963 V. K. Chandhok, J. P. Hirth, and E. J. Dulis:Trans. ASM, 1963, vol. 56, pp. 677-91.
J. T. Michalak and G. R. Speich: unpublished work, E. C. Bain Laboratory, U. S. Steel Corp., Monroeville, Pa.
Trans. TMS-AIME V. K. Chandhok 224 858 1962 V. K. Chandhok, J. P. Hirth, and E. J. Dulis:Trans. TMS-AIME, 1962, vol. 224, pp. 858-64.
R. L. Rickett and J. M. Hodge:Proc. ASTM, 1951, pp. 931-44.
L. F. Porter 1969 Metallurgical Factors Affecting Toughness L. F. Porter:Metallurgical Factors Affecting Toughness, ASM Seminar, Houston, Texas, 1969.
Trans. ASM W. S. Owen 46 812 1954 W. S. Owen:Trans. ASM, 1954, vol. 46, pp. 812-29.
J Iron Steel Inst R. A. Tewau 208 87 1970 R. A. Tewau and P. R. Dahr:J Iron Steel Inst, 1970, vol. 208, pp. 87-88.
J. Iron Steel Inst B. C. Wood fine 173 229 1953 B. C. Wood fine:J. Iron Steel Inst, 1953, vol. 173, pp. 229-39.
J. R. Low 127 1959 Fracture of Engineering Materials J. R. Low:Fracture of Engineering Materials, pp. 127-42, ASM, Cleveland, Ohio, 1959.
Trans. ASM P. A. Restaini 60 699 1967 P. A. Restaini and C. J. McMahon:Trans. ASM, 1967, vol. 60, pp. 699-706.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.