참고문헌 (42)

1. L.J. Gibson: Ph.D. Thesis, Engineering Department, Cambridge University, 1981. 

2. Proc. R. Soc. Lond. L. J. Gibson A382 25 1982 L. J. Gibson, M. F. Ashby, G. S. Schajer, and C. I. Robertson:Proc. R. Soc. Lond., 1982, vol. A382, p. 25. 

3. J. Materials M. R. Patel 5 909 1970 10.1007/BF00574864 M. R. Patel and I. Finnie:J. Materials, 1970, vol. 5, p. 909. 

   상세보기

4. Composites F. K. A. El Sayed 10 209 1979 10.1016/0010-4361(79)90021-1 F. K. Abd. El Sayed, R. Jones, and I. W. Burgess:Composites, 1979, vol. 10, p. 209. 

   상세보기

5. J. Appl. Polymer Sci. A. N. Gent 1 107 1959 10.1002/app.1959.070010117 A. N. Gent and A. G. Thomas:J. Appl. Polymer Sci., 1959, vol. 1, p. 107. 

   상세보기

6. Rubber Chem. Technol. A.M. Gent 36 597 1963 10.5254/1.3539591 A.M. Gent and A.G. Thomas:Rubber Chem. Technol., 1963, vol. 36, p. 597. 

   상세보기

7. J. Cell. Plastics W. L. Ko 1 45 1965 10.1177/0021955X6500100107 W. L. Ko:J. Cell. Plastics, 1965, vol. 1, p. 45. 

   상세보기

8. J. Appl. Polymer Sci. J.M. Lederman 15 693 1971 10.1002/app.1971.070150314 J.M. Lederman:J. Appl. Polymer Sci., 1971, vol. 15, p. 693. 

   상세보기

9. Polymer Eng. Sci. G. Menges 15 623 1975 10.1002/pen.760150810 G. Menges and F. Knipschild:Polymer Eng. Sci., 1975, vol. 15, p. 623. 

   상세보기

10. Proc. R. Soc. Lond. L.J. Gibson A382 43 1982 L.J. Gibson and M.F. Ashby:Proc. R. Soc. Lond., 1982, vol. A382, p. 43. 

11. Plastics Polymers S. Baxter 40 69 1972 S. Baxter and T.T. Jones:Plastics Polymers, 1972, vol. 40, p. 69. 

12. Polymer Engng. Sci. P. J. Phillips 4 67 1974 10.1002/pen.760140111 P. J. Phillips and N. R. Waterman:Polymer Engng. Sci., 1974, vol.4, p. 67. 

    상세보기

13. D.R. Moore 1975 (1980) “The use of glass in engineering”, Design Council Guide 05 D.R. Moore: (1980) “The use of glass in engineering”, Design Council Guide 05, Oxford, Univ. Press, 1975. 

14. J. Cell. Plastics R. Chan 5 112 1969 10.1177/0021955X6900500207 R. Chan and M. Nakamura:J. Cell. Plastics, 1969, vol. 5, p. 112. 

    상세보기

15. C.A. Brighton and A. E. Meazey: “Expanded polyvinyl chloride,” in “Expanded Plastics -Trends in Performance Requirements” -A Micro Symposium organized by Q.M.C. Industrial Research Ltd., September 25, 1973, London. 

16. Int.J.Mech.Sci. M. Wilsea K.L.Johnson 17 457 1975 10.1016/0020-7403(75)90078-8 M. Wilsea, K.L.Johnson, and M.F. Ashby:Int.J.Mech.Sci., 1975, vol. 17, p. 457. 

    상세보기

17. J. Am. Ceram. Soc J.B. Walsh 48 605 1965 10.1111/j.1151-2916.1965.tb14687.x J.B. Walsh, W.F. Brace, and A.W. England:J. Am. Ceram. Soc, 1965, vol. 48, p. 605. 

    상세보기

18. Pittsburgh-Corning Inc., Foamglass Data Sheets, 1982. 

19. V.A. Matonis: S.P.E. Jl, September 1964, p. 1024. 

20. J. Appl. Phys. P. Barma 49 4985 1978 10.1063/1.324444 P. Barma, M.B. Rhodes, and R. Salovey:J. Appl. Phys., 1978, vol. 49, p. 4985. 

    상세보기

21. Metall. Trans. A P.H. Thornton 6A 1253 1975 10.1007/BF02658535 P.H. Thornton and C. L. Magee:Metall. Trans. A, 1975, vol. 6A, p. 1253. 

    상세보기

22. Metall. Trans. A P. H. Thornton 6A 1801 1975 10.1007/BF02642310 P. H. Thornton and C. L. Magee:Metall. Trans. A, 1975, vol. 6A, p. 1801. 

    상세보기

23. J. Cell. Plastics R.K. Traeger 3 405 1967 10.1177/0021955X6700300906 R.K. Traeger:J. Cell. Plastics, 1967, vol. 3, p. 405. 

    상세보기

24. Int. J. Mech. Sci. M.C. Shaw 8 469 1966 10.1016/0020-7403(66)90019-1 M.C. Shaw and T. Sata:Int. J. Mech. Sci., 1966, vol. 8, p. 469. 

    상세보기

25. J. Appl. Poly. Sci. J. A. Rinde 14 1913 1970 10.1002/app.1970.070140801 J. A. Rinde:J. Appl. Poly. Sci., 1970, vol. 14, p. 1913. 

    상세보기

26. J. Appl. Poly. Sci. K.C. Rusch 14 1263 1970 10.1002/app.1970.070140514 K.C. Rusch:J. Appl. Poly. Sci., 1970, vol. 14, p. 1263. 

    상세보기

27. Polymer A. Mclntyre 20 247 1979 10.1016/0032-3861(79)90229-5 A. Mclntyre and G. E. Anderton:Polymer, 1979, vol. 20, p. 247. 

    상세보기

28. Int. J. Fracture C.W. Fowlkes 10 99 1974 10.1007/BF00955084 C.W. Fowlkes:Int. J. Fracture, 1974, vol. 10, p. 99. 

    상세보기

29. W. F. Roff 1971 Fibres, Films, Plastics and Rubbers-A Handbook of Common Polymers W. F. Roff and J. R. Scott:Fibres, Films, Plastics and Rubbers-A Handbook of Common Polymers, Butterworths, London, 1971. 

30. C. A. Harper 1975 Handbook of Plastics and Elastomers C. A. Harper:Handbook of Plastics and Elastomers, New York, NY, McGraw-Hill, 1975. 

31. B.J. Lazan 1968 Damping of Materials and Members in Structural Mechanics B.J. Lazan:Damping of Materials and Members in Structural Mechanics, Oxford, Pergamon Press, 1968. 

32. F. W. Billmeyer 1971 Textbook of Polymer Science 2nd edn. F. W. Billmeyer:Textbook of Polymer Science, 2nd edn., New York, NY, Wiley Interscience, 1971. 

33. Plastics Polymers M.J. Bonnin 37 517 1969 M.J. Bonnin, C. M. R. Dunn, and S. Turner:Plastics Polymers, 1969, vol. 37, p. 517. 

34. D.S. Oliver: (1980) “The Use of Glass in Engineering”, Design Council Guide 05, Oxford Univ. Press, 1975. 

35. Proc. R. Soc. Lond. K. E. Easterling A383 31 1982 K. E. Easterling, R. Harrysson, L. J. Gibson, and M. F. Ashby:Proc. R. Soc. Lond., 1982, vol. A383, p. 31. 

36. L. J. Gibson: to be published, 1984. 

37. Proc. R. Soc L.J. Gibson A377 99 1981 L.J. Gibson, K.E. Easterling, and M. F. Ashby:Proc. R. Soc, 1981, vol. A377, p. 99. 

38. Q. Horace:Odes, 27 B.C., Book III, ode 8, line 10. 

39. Hilgardia M. Kleiber 6 315 1932 10.3733/hilg.v06n11p315 M. Kleiber:Hilgardia, 1932, vol. 6, p. 315. 

    상세보기

40. Science T. McMahon 179 1201 1973 10.1126/science.179.4079.1201 T. McMahon:Science, 1973, vol. 179, p. 1201. 

    상세보기

41. J.M. Dinwoodie 1981 Timber, its Nature and Behaviour J.M. Dinwoodie: “Timber, its Nature and Behaviour”, New York, NY, van Nostrand, 1981. 

42. H. G. Allen 1969 Analysis and Design of Structural Sandwich Panels H. G. Allen: “Analysis and Design of Structural Sandwich Panels”, Pergamon Press, Oxford, 1969.