$\require{mediawiki-texvc}$

연합인증

연합인증 가입 기관의 연구자들은 소속기관의 인증정보(ID와 암호)를 이용해 다른 대학, 연구기관, 서비스 공급자의 다양한 온라인 자원과 연구 데이터를 이용할 수 있습니다.

이는 여행자가 자국에서 발행 받은 여권으로 세계 각국을 자유롭게 여행할 수 있는 것과 같습니다.

연합인증으로 이용이 가능한 서비스는 NTIS, DataON, Edison, Kafe, Webinar 등이 있습니다.

한번의 인증절차만으로 연합인증 가입 서비스에 추가 로그인 없이 이용이 가능합니다.

다만, 연합인증을 위해서는 최초 1회만 인증 절차가 필요합니다. (회원이 아닐 경우 회원 가입이 필요합니다.)

연합인증 절차는 다음과 같습니다.

최초이용시에는
ScienceON에 로그인 → 연합인증 서비스 접속 → 로그인 (본인 확인 또는 회원가입) → 서비스 이용

그 이후에는
ScienceON 로그인 → 연합인증 서비스 접속 → 서비스 이용

연합인증을 활용하시면 KISTI가 제공하는 다양한 서비스를 편리하게 이용하실 수 있습니다.

Characteristics of SBR, Neoprene and EPDM compounds in a single-pass pendulum scratch

Tribology international, v.54, 2012년, pp.9 - 16  

Low, K.O. (Center for Advanced Materials and Green Technologies, Faculty of Engineering and Technology, Multimedia University, Jalan Ayer Keroh Lama, Bukit Beruang, 75450 Melaka, Malaysia) ,  Teo, W.C.

Abstract AI-Helper 아이콘AI-Helper

In this study, the effect of carbon black on the scratch and deformation characteristics of styrene-butadiene rubber (SBR), polychloroprene (Neoprene) and ethylene propylene diene monomer rubber (EPDM) were evaluated using single-pass pendulum scratch technique. The introduction of carbo...

주제어

참고문헌 (22)

  1. Advanced Composites Letters Low 19 4 140 2010 10.1177/096369351001900403 An experimental study on the scratch characteristics of bamboo fibre-reinforced epoxy composite 

  2. Scratching of Materials and Applications Zhang 51 56 2006 10.1016/S0167-8922(06)80039-8 Friction, damage and stick-slip in the scratching of polymer 

  3. Wear Ducret 255 1093 2003 10.1016/S0043-1648(03)00242-4 Friction characterisation of polymers abrasion (UHWMPE) during scratch tests: single and multi-asperity contact 

  4. Wear Briscoe 200 137 1996 10.1016/S0043-1648(96)07314-0 Scratching maps for polymers 

  5. Scratching of Materials and Applications Felder 51 22 2006 10.1016/S0167-8922(06)80038-6 Mechanical analysis of the scratching of metals and polymers at moderate and large strains 

  6. Wear Liang 199 66 1996 10.1016/0043-1648(96)07218-3 Some developments for single-pass pendulum scratching 

  7. Tribology International Hu 32 153 1999 10.1016/S0301-679X(99)00029-8 Determination of dynamic mechanical properties of metals from single pendulum scratch tests 

  8. ASM Handbook: mechanical testing and evaluation; 2000. 

  9. Wear Briscoe 225-229 319 1999 10.1016/S0043-1648(99)00051-4 Single-pass pendulum scratching poly(styrene) and poly(methylmethacrylate) 

  10. Wear Maeda 259 651 2005 10.1016/j.wear.2005.02.046 Mechanisms of scratching frictions and damage maps for rubber compounds 

  11. Tribology International Williams 29 675 1996 10.1016/0301-679X(96)00014-X Analytical models of scratch hardness 

  12. Barlow 1993 Rubber compounding principles, materials, and techniques 

  13. Callister 2009 Materials science and engineering: an introduction 

  14. ASTM D1765: Standard classification system for carbon blacks used in rubber products. 

  15. ASTM D3192: Standard test methods for carbon black evaluation in NR (natural rubber). 

  16. Materials and Design Mostafa 30 1561 2008 10.1016/j.matdes.2008.07.043 Effect of carbon black loading on the swelling, and compression set behavior of SBR and NBR rubber compounds 

  17. Rao 2011 Mechanical vibration 

  18. Wear Maeda 263 1016 2007 10.1016/j.wear.2007.02.002 Effect of bulk deformation on rubber adhesion 

  19. Materials Science and Engineering A Zokaei 445-446 526 2006 Study of scratch resistance in homo- and co-polypropylene filled with nanometric calcium carbonate 

  20. Scratching of Materials and Applications Li 51 102 2006 10.1016/S0167-8922(06)80041-6 Metrology for characterizing the scratch resistance of polymeric coating through scattering 

  21. Scratching of Materials and Applications Sinha 51 124 2006 10.1016/S0167-8922(06)80042-8 Scratching of polymers: deformation mapping and wear modeling 

  22. Progress in Organic Coatings Jardret 48 322 2003 10.1016/j.porgcoat.2003.02.002 Viscoelastic effects on the scratch resistance of polymers: relationship between mechanical properties and scratch properties at various temperatures. 

섹션별 컨텐츠 바로가기

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

AI-Helper 아이콘
AI-Helper
안녕하세요, AI-Helper입니다. 좌측 "선택된 텍스트"에서 텍스트를 선택하여 요약, 번역, 용어설명을 실행하세요.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.

선택된 텍스트

맨위로