[논문]Ageing of polymeric surfaces exhibiting flow marks—Effects on surface characteristics

doi:10.1002/app.36893

Ageing of polymeric surfaces exhibiting flow marks—Effects on surface characteristics

Journal of applied polymer science, v.126 no.3, 2012년, pp.1136 - 1145

Iannuzzi, G. (Nanofactory Instruments AB, 41288 Gothenburg, Sweden) , Nafari, A. (Department of Materials and Manufacturing Technology, Chalmers University of Technology, Gothenburg, Sweden) , Boldizar, A. (Department of Materials and Manufacturing Technology, Chalmers University of Technology, Gothenburg, Sweden) , Rigdahl, M.

Abstract ▼ AI-Helper

AbstractSurface defects associated with manufacturing processes can severely impair the appearance of polymeric products. These defects can be enhanced with ageing (time, UV‐light, heat and weather conditions). In the present contribution, the interest is focused on the defects generated during injection molding of elastomer‐modified polymers that are often used in the automotive sector to produce interior and exterior components. In particular, defects denoted as “flow marks” or “tiger stripes” were investigated. Two different grades of elastomer‐modified polypropylene (PP)‐containing mineral fillers were studied here before and after heat ageing for 9 weeks at a constant temperature of 95°C. Although injection moldings are one of the grades that did not exhibit any flow marks, moldings of other PP‐grade showed such defects and they were enhanced after the ageing process. The properties and structure of the glossy and the dull bands (as well as the effect of the thermal ageing) have been assessed by several characteristics such as microhardness, nanohardness, crystallinity, and surface composition. An increase in surface hardness was noted after the ageing treatment as a consequence of increased crystallinity. Dull and glossy bands also exhibited different values of the nanohardness, glossy bands were harder, and the dull bands appeared to be less crystalline. The surface composition of glossy and dull regions was slightly different; the surface regions of the glossy areas contained higher amounts of filler particles. The effect of the ageing on the striped appearance is furthermore discussed in relation to possible depletion of the stabilizer system. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012

주제어

참고문헌 (31)

1 Bulters , M. ; Schepens , A. Proceedings of the 16th Annual Meeting Polymer Processing Society 2000 , 144 .
2 Grillet , A. M. ; Bogaerds , A. C. B. ; Peters , G. W. M. ; Baaijens , F. P. T. ; Bulters , M. J. Rheology 2002 , 46 , 651 .
3 Hobbs , S. Y. Polym Eng Sci 1996 , 36 , 1489 .

상세보기
4 Iannuzzi , G. ; Boldizar , A. ; Rigdahl , M. Trans Nordic Rheol Soc 2009 , 17 , 157 .
5 An , C.‐C. ; Chen , R.‐H. J Mater Process Technol 2008 , 201 , 706 .

상세보기
6 Dharia , A. J. Inj Mold Technol 1999 , 3 , 67 .
7 Iannuzzi , G. ; Rigdahl , M. J. Appl Polym Sci 2010 , 118 , 604 .
8 Hirano , K. ; Suetsugu , Y. ; Kanai , T. J Appl Polym Sci 2007 , 104 , 192 .

상세보기
9 Patham , B. ; Papworth , P. ; Jayaraman , K. ; Shu , C. ; Wolkowicz , M. D. J Appl Polym Sci 2005 , 96 , 423 .

상세보기
10 Hirano , K. ; Tamura , S. ; Kanai , T. J Appl Polym Sci 2007 , 105 , 2416 .

상세보기
11 Hirano , K. ; Tamura , S. ; Obata , Y. ; Kanai , T. J Appl Polym Sci 2008 , 108 , 76 .

상세보기
12 Fechine , G. J. M. ; Demarquette , N. R. Polym Eng Sci 2008 , 48 , 365 .

상세보기
13 Rabello , M. S. ; White , J. R. Polym Compos 1996 , 17 , 691 .

상세보기
14 Janová , D. Czech J Phys 1994 , 44 , 255 .

상세보기
15 Ariño , R. Three‐Dimensional SEM Characterization of the Topography of Polymeric Surfaces , Master Thesis, Chalmers University of Technology, 2008 .
16 Ignell , S. ; Ariño , R. ; Iannuzzi , G. ; Kleist , U. ; Rigdahl , M. Polym Eng Sci 2010 , 50 , 1527 .

상세보기
17 González , V. A. ; Alanís , M. ; Guerrero , C. ; Ortiz , U. J Polym Sci Part B: Polym Phys 2004 , 42 , 646 .
18 Calleja , F. J. B. ; Fakirov , S. Microhardness of Polymers ; Cambridge University Press : Cambridge, UK , 2000 .
19 Oliver , W. C. ; Pharr , G. M. J Mater Res 1992 , 7 , 1564 .
20 Nafari , A. ; Angenete , J. ; Svensson , K. ; Sanz‐Velasco , A. ; Enoksson , P. J Micromech Microeng 2010 , 20 , 064017 ( 8pp ).
21 Svensson , K. ; Jompol , Y. ; Olin , H. ; Olsson , E. Rev Sci Instrum 2003 , 74 , 4945 .

상세보기
22 Judd , D. ; Wyszecki , G. Color in Business, Science and Industry ; John Wiley and Sons Inc. : New York, USA , 1975 .
23 Ariño , I. ; Kleist , U. ; Rigdahl , M. Polym Eng Sci 2004 , 44 , 141 .

상세보기
24 Hoff , A. ; Jacobsson , S. J. Appl Polym Sci 1984 , 29 , 465 .
25 Barrer , R. M. Diffusion in Polymers ; Academic Press : London, UK , 1968 .
26 He , B. B. Two‐Dimensional X‐ray Diffraction ; John Wiley & Sons : Hoboken, New Jersey, USA , 2009 .
27 Rabello , M. S. ; White , J. R. Polym Degrad Stab 1997 , 56 , 55 .
28 Weidinger , A. ; Hermans , P. H. Makromol Chem 1961 , 50 , 98 .
29 Nishino , T. ; Matsumoto , T. ; Nakamae , K. Polym Eng Sci 2000 , 40 , 336 .
30 Conners , T. E. ; Banarjee , S. Surface Analysis of Paper ; CRC Press Inc. : Baca Raton, Florida, USA , 1995 .
31 Rabello , M. S. ; White , J. R. Plast Rubber Comp Process Appl 1996 , 25 , 237 .

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Ageing of polymeric surfaces exhibiting flow marks—Effects on surface characteristics

Abstract ▼ AI-Helper

주제어

참고문헌 (31)

이 논문을 인용한 문헌

관련 콘텐츠

원문 URL 링크

연관된 기능

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트