최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Procedia engineering, v.38, 2012년, pp.691 - 697
Kumar, N.S. , Shetty, A. , Shetty, A. , K, A. , Shetty, H.
This paper investigates the effect of process parameters in turning of Carbon Alloy Steels in a CNC lathe. The parameters namely the spindle speed and feed rate are varied to study their effect on surface roughness. The experiments are conducted using one factor at a time approach. The five differen...
Mike SL, Joseph C, Chen, Li M (1998), “Surface roughness prediction for CNC End milling”, Materials and processes quality control manufacturing, J. Ind. Technol., 15(1): (1999).
10.1080/10402009608983503 Lee and Ren, S.C. Lee and N. Ren, “Behaviour of elastic-plastic rough surface contacts as affected by surface topography, load and material hardness”, Tribol. Trans. 39 (1) 1996, pp. 67-74.
10.1016/S0043-1648(03)00329-6 B. Xiao Li, G. Rosen, Naser Amini and H. Nilsson Per, “A study on the effect of surface topography on rough friction in roller contact”, J. Wear 254. 2003, pp. 1162-1169.
10.1016/j.jmatprotec.2003.10.009 O. Mahrenholtz, N. Bontcheva and R. Iankov, “Influence of surface roughness on friction during metal forming processes”, J. Mater. Process. Technol. 159, 2005, pp. 9-16.
A. I. Selmy, I. El-Sonbaty, F. Shehata and U. A. Khashaba, “Some factors affecting the accuracy of turned parts”, Scientific Bulletin of the Faculty of Engineering vol. 24 (2), Ain Shams University, Egypt, 1989, pp. 356-368.
10.3923/ajsr.2008.12.21 A.B. Abdullah, L.Y. Chia and Z. Samad, “The Effect of Feed Rate and Cutting Speed to Surface Roughness” Asian Journal of Scientific Research 1(1): 12-21, 2008.
C. Natarajan, S. Muthu and P. Karuppuswamy. “Investigation of cutting parameters of surface roughness for a non-ferrous material using artificial neural network in CNC turning”, Journal of Mechanical Engineering Research Vol. 3(1), pp. 1-14, January 2011.
Mohammed T. Hayajneh, Montasser S. Tahat, Joachim Bluhm, “A Study of the Effects of Machining Parameters on the Surface Roughness in the End-Milling Process.” Vol.1, Number 1, ISSN 1995-6665 2007.
Deepak Mittal, M.P. Garg and Rajesh Khanna, “An investigation of the effect of process parameters on MRR in turning of pure titanium (Grade-2)”, International Journal of Engineering Science and Technology, Vol. 3 No. 8 August 2011.
10.1016/j.jmatprotec.2007.12.018 D.I. Lalwani, N.K. Mehta, P.K. Jain, “Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel”, Journal of materials processing technology 206 (2008), 167-179.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
저자가 APC(Article Processing Charge)를 지불한 논문에 한하여 자유로운 이용이 가능한, hybrid 저널에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.