최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Procedia CIRP, v.6, 2013년, pp.13 - 26
Rajurkar, K.P. , Sundaram, M.M. , Malshe, A.P.
Electrochemical and electro-discharge machining processes are the two major electro-machining processes with unique capabilities. Electrical Discharge Machining (EDM) and Electrochemical Machining (ECM) offer a better alternative or sometimes the only alternative in generating accurate 3-D complex s...
CIRP Annals - Manufacturing Technology Rajurkar 48 2 567 1999 10.1016/S0007-8506(07)63235-1 New Developments in Electro-Chemical Machining
McGeough, J.A., Principles of electrochemical machining. 1974: Chapman and Hall.
10.1016/j.procir.2012.05.048 Klocke, F.,Zeis, M., Klink, A., Veselovac, D., Technological and Economical Comaprision of Roughing Startegies via Milling, EDM and ECM for Tiatnium- and Niclel-based Blisks, Proceedings of the 1st CIRP Global Web Conference on Interdisciplinary Research in Production Engineering, 2012, Vol. 2, p.98-101.
CIRP Annals - Manufacturing Technology Rajurkar 42 1 231 1993 10.1016/S0007-8506(07)62432-9 Study of Pulse Electrochemical Machining Characteristics
Science Schuster 289 5476 98 2000 10.1126/science.289.5476.98 Electrochemical Micromachining
Taylor, E.J., McCrabb, H., Garich, H.,Hall, T., Inman, M., A Pulse/Pulse Reverse Electrolytic Approcah to Electropolishing and Through-Mask Electroetchining, Products Finishing Magzine, September 2011.
Chinese Journal of Aeronautics Huaiqian 21 5 455 2008 10.1016/S1000-9361(08)60059-X Aviation-oriented Micromachining Technology-Micro-ECM in Pure Water
Electrochemical shaping of aerodynamic seal elements. Russian Aeronautics (Iz VUZ) Pavlinich 51 3 330 2008
10.1007/s00542-012-1653-3 Kamaraj, A.B., M.M. Sundaram, and R. Mathew, Ultra high aspect ratio penetrating metal microelectrodes for biomedical applications. Microsystem Technologies, 2012.
International Journal of Machining and Machinability of Materials Dhobe 10 4 293 2011 10.1504/IJMMM.2011.043085 Analysis of surface characteristics of titanium during ECM
CIRP Annals - Manufacturing Technology Aurich 58 2 519 2009 10.1016/j.cirp.2009.09.004 Burrs-Analysis, control and removal
International Journal of Advanced Manufacturing Technology Wang 49 9-12 969 2010 10.1007/s00170-009-2462-4 Electrochemical machining of the spiral internal turbulator
CIRP Annals - Manufacturing Technology Pattavanitch 61 1 199 2012 10.1016/j.cirp.2012.03.086 Machining of turbulated cooling channel holes in turbine blades
Fusion Engineering and Design Krauss 85 10-12 2257 2010 10.1016/j.fusengdes.2010.09.005 Advanced electro-chemical processing of tungsten components for He-cooled divertor application
10.1016/j.jnucmat.2007.04.027 Norajitra, P., et al., Development of a helium-cooled divertor: Material choice and technological studies. Journal of Nuclear Materials, 2007. 367-370, Part B(0): p. 1416-1421.
10.1016/j.fusengdes.2010.11.003 Holstein, N., W. Krauss, and J. Konys, Development of novel tungsten processing technologies for electro-chemical machining (ECM) of plasma facing components. Fusion Engineering and Design, 2011. 86(9-11): p. 1611-1615.
CIRP Annals - Manufacturing Technology Zabel 61 1 111 2012 10.1016/j.cirp.2012.03.002 Deep hole drilling using tools with small diameters-Process analysis and process design
The International Journal of Advanced Manufacturing Technology Fan 52 5-8 555 2010 Electrochemical micro-drilling of deep holes by rotational cathode tools
CIRP Annals - Manufacturing Technology Ali 58 1 185 2009 10.1016/j.cirp.2009.03.070 Shaped tube electrochemical drilling of good quality holes
10.1016/j.surfcoat.2012.08.043 Parreira, J.G., C.A. Gallo, and H.L. Costa, New Advances on Maskless Electrochemical Surface Texturing (MECT) for Tribological Purposes. Surface and Coatings Technology, 2012.
Russian Journal of Electrochemistry Volgin 48 6 565 2012 10.1134/S1023193512060146 Mass-transfer problems in the electrochemical systems
Journal of Applied Mathematics and Mechanics Minazetdinov 73 1 41 2009 10.1016/j.jappmathmech.2009.03.009 A hydrodynamic interpretation of a problem in the theory of the dimensional electrochemical machining of metals
Journal of Applied Mathematics and Mechanics Minazetdinov 73 5 592 2009 10.1016/j.jappmathmech.2009.11.012 A scheme for the electrochemical machining of metals by a cathode tool with a curvilinear part of the boundary
Chinese Journal of Aeronautics Zhiyong 20 6 570 2007 10.1016/S1000-9361(07)60084-3 Convergence Analysis of the Numerical Solution for Cathode Design of Aero-engine Blades in Electrochemical Machining
10.1016/j.jmatprotec.2010.01.016 Ma, N., et al., Pulse electrochemical finishing: Modeling and experiment. Journal of Materials Processing Technology, 2010. 210(6-7): p. 852-857.
Electrochimica Acta Wu 75 94 2012 10.1016/j.electacta.2012.04.078 Study of a novel cathode tool structure for improving heat removal in electrochemical micro-machining
Part I: Theoretical basis. Electrochimica Acta Deconinck 60 0 321 2012 A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process
Part II: Numerical simulation. Electrochimica Acta Deconinck 69 0 120 2012 A temperature dependent multi-ion model for time accurate numerical simulation of the electrochemical machining process
Kozak, J., Zybura-Skrabalak, M., Dzieddzic, J., Czekaj, J., Electrochemical Shaping ofairfoils using seuquences of ECM- PECM treatments, Proceedings of the International Symposium on Electrochemical Machining Technology INSECT, 2012.
10.1016/j.jmatprotec.2007.05.058 Brusilovski, Z., Adjustment and readjustment of electrochemical machines and control of the process parameters in machining shaped surfaces. Journal of Materials Processing Technology, 2008. 196(1-3): p. 311-320.
International Journal of Machine Tools and Manufacture Bhattacharyya 44 15 1577 2004 10.1016/j.ijmachtools.2004.06.006 Advancement in electrochemical micro-machining
Neto, S. and J. Cirilo. Development of a Prototype of Electrochemical Machining. in 17th CIRP Conference on Modelling of Machining Operations, May 12, 2011 - May 13, 2011. 2011. Sintra, Portugal: Trans Tech Publications.
Ozkeskin, F.M., et al. Feedback controlled high frequency electrochemical micromachining. in 54th International Instrumentation Symposium, May 5, 2008 - May 8, 2008. 2008. Pensacola Beach, FL, United states: ISA - Instrumentation, Systems, and Automation Society.
Wang, X., D. Zhao, and N. Yun, Research on intelligent measurement and control method of interelectrode gap of electrochemical machining (ECM). China Mechanical Engineering, 2007. 18(23): p. 2860-4.
The International Journal of Advanced Manufacturing Technology Lu 55 5 565 2011 10.1007/s00170-010-3105-5 Experimental investigation on monitoring interelectrode gap of ECM with six-axis force sensor
10.4028/www.scientific.net/AMR.230-232.1190 Min, K., L. Houshang, and F. Xiuqing, Measurement of Electrochemical Machining Initial Gap Based on Machine Vision. Advanced Materials Research, 2011. 230-232: p. 1190-4.
10.1007/s00170-007-1204-8 Asokan, P., et al., Development of multi-objective optimization models for electrochemical machining process. International Journal of Advanced Manufacturing Technology, 2008. 39(1-2): p. 55-63.
Li, Z. and H. Ji. Machining accuracy prediction and experiment research of blade in electrochemical machining based on BP Neural Network. in 2009 Joint International Conference on Modelling and Simulation, May 21, 2009 - May 22, 2009. 2009. Manchester, United kingdom: World Academic Union.
Zhiyong, L. and J. Hua. Machining Accuracy Prediction of Aero- engine Blade in Electrochemical Machining Based on BP Neural Network. in 2009 International Workshop on Information Security and Application (IWISA 2009), 21-22 Nov. 2009. 2009. Oulu, Finland: Academy Publisher.
Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics Lu 41 1 97 2009 Fuzzy controlling interelectrode gap method of electrochemical machining (ECM) based on 6-D forces and machining current
Expert Systems with Applications Labib 38 6 7486 2011 10.1016/j.eswa.2010.12.074 Towards next generation electrochemical machining controllers: A fuzzy logic control approach to ECM
10.1007/s00170-011-3355-x Mithu, M.A.H., G. Fantoni, and J. Ciampi, A step towards the in- process monitoring for electrochemical microdrilling. The International Journal of Advanced Manufacturing Technology, 2011. 57(9-12): p. 969-982.
10.1016/j.jmatprotec.2007.04.112 Munda, J., M. Malapati, and B. Bhattacharyya, Control of micro- spark and stray-current effect during EMM process. Journal of Materials Processing Technology, 2007. 194(1-3): p. 151-158.
Wollenberg,G., et al., Controlled current rise for pulsed electrochemical machining, Proceeedings of the 15th ISEM, 2007, p. 335-338.
Liua, Z., et al. Electrochemical micro drilling of stainless steel with tool electrode jump motion. in 13th International Manufacturing Conference in China, IMCC2009, September 21, 2009 - September 23, 2009. 2009. Dalian, China: Trans Tech Publications Ltd.
CIRP Annals - Manufacturing Technology Kim 54 1 191 2005 10.1016/S0007-8506(07)60081-X Micro Electrochemical Machining of 3D Micro Structure Using Dilute Sulfuric Acid
Journal of Materials Processing Technology Mathew 212 7 1567 2012 10.1016/j.jmatprotec.2012.03.004 Modeling and fabrication of micro tools by pulsed electrochemical machining
Advanced Functional Materials Bassu 22 6 1222 2012 10.1002/adfm.201102124 Electrochemical micromachining as an enabling technology for advanced silicon microstructuring
The Journal of Physical Chemistry B Allongue 108 38 14434 2004 10.1021/jp0497312 Electrochemical Micromachining of p-Type Silicon†
Electrochimica Acta Pa 55 10 3504 2010 10.1016/j.electacta.2010.01.083 Yield enhancement for the surface of solar-cell silicon wafers with electromechanical micromachining
The International Journal of Advanced Manufacturing Technology Choi 31 7 682 2007 Fabrication of WC micro-shaft by using electrochemical etching
Materials Science and Technology Senthilkumar 26 3 289 2010 10.1179/174328409X459239 Modelling and analysis of electrochemical machining of cast Al/20%SiCp composites
Electrochimica Acta Walther 52 27 7732 2007 10.1016/j.electacta.2006.12.038 Electrochemical dissolution of hard metal alloys
Journal of Electroanalytical Chemistry Ma 662 1 12 2011 10.1016/j.jelechem.2011.01.046 Locally enhanced cathodoluminescence of electrochemically fabricated gold nanostructures
Procedia Engineering Bassu 25 0 1653 2011 10.1016/j.proeng.2011.12.409 Advances in Electrochemical Micromachining of Silicon: Towards MEMS Fabrication
ChemPhysChem Schuster 8 1 34 2007 10.1002/cphc.200600401 Electrochemical Microstructuring with Short Voltage Pulses
10.1016/j.jmatprotec.2007.09.027 Mahdavinejad, R. and M. Hatami, On the application of electrochemical machining for inner surface polishing of gun barrel chamber. Journal of Materials Processing Technology, 2008. 202(1-3): p. 307-315.
10.1149/1.3033735 Lee, C.-L., et al., Electrochemical Grooving of Si Wafers Using Catalytic Wire Electrodes in HF Solution. Journal of The Electrochemical Society, 2009. 156(2): p. H134-H137.
Optics and Lasers in Engineering Long 48 5 570 2010 10.1016/j.optlaseng.2009.12.001 Excimer laser electrochemical etching n-Si in the KOH solution
Abrasive electrochemical multi-wire slicing of solar silicon ingots into wafers. CIRP Annals - Manufacturing Technology Wang 60 1 255 2011
Microsystem Technologies Zhang 13 7 607 2007 10.1007/s00542-006-0369-7 Theoretical and experimental investigation on electrochemical micromachining
Microsystem Technologies Staemmler 14 2 249 2008 10.1007/s00542-007-0423-0 Hybrid tooling by a combination of high speed cutting and electrochemical milling with ultrashort voltage pulses
10.1007/s00170-012-4088-1 Jain, V.K., et al., Fabrication of micro-features and micro-tools using electrochemical micromachining. The International Journal of Advanced Manufacturing Technology, 2012: p. 1-9.
Precision Engineering Fan 34 3 489 2010 10.1016/j.precisioneng.2010.01.001 Fabrication of tungsten microelectrodes using pulsed electrochemical machining
10.1016/j.jmatprotec.2006.11.069 Wang, J.J.J., et al., Fabrication of wedge-shape tool via electrochemical micromachining with diamond-like carbon coating. Journal of Materials Processing Technology, 2007. 187-188: p. 264-269.
International Journal of Machine Tools and Manufacture Ghoshal 64 0 49 2013 10.1016/j.ijmachtools.2012.07.014 Influence of vibration on micro-tool fabrication by electrochemical machining
CIRP Annals - Manufacturing Technology Jo 58 1 181 2009 10.1016/j.cirp.2009.03.072 Micro electrochemical machining for complex internal micro features
10.1007/s00170-009-2247-9 Wang, W., et al., Electrochemical drilling inclined holes using wedged electrodes. The International Journal of Advanced Manufacturing Technology, 2010. 47(9-12): p. 1129-1136.
10.1007/s00170-010-3035-2 Liu, Y., et al., Development of microelectrodes for electrochemical micromachining. The International Journal of Advanced Manufacturing Technology, 2010. 55(1-4): p. 195-203.
Corrosion Science Neergat 53 12 3983 2011 10.1016/j.corsci.2011.08.001 Electrodissolution of 304 stainless steel in neutral electrolytes for surface decontamination applications
International Journal of Refractory Metals and Hard Materials Abbas 29 4 542 2011 10.1016/j.ijrmhm.2011.03.010 The electrochemical dissolution of molybdenum in non-aqueous media
Precision Engineering Yang 35 2 204 2011 10.1016/j.precisioneng.2010.09.009 Realization of eco-friendly electrochemical micromachining using mineral water as an electrolyte
Journal of Materials Processing Technology Ryu 209 6 2831 2009 10.1016/j.jmatprotec.2008.06.044 Micro fabrication by electrochemical process in citric acid electrolyte
Journal of Manufacturing Processes Swain 14 2 150 2012 10.1016/j.jmapro.2011.11.005 Use of coated microtools in advanced manufacturing: An exploratory study in electrochemical machining (ECM) context
10.1016/j.jmatprotec.2004.02.046 Westley, J.A., J. Atkinson, and A. Duffield, Generic aspects of tool design for electrochemical machining. Journal of Materials Processing Technology, 2004. 149(1-3): p. 384-392.
Finite Elements in Analysis and Design Sun 43 2 168 2006 10.1016/j.finel.2006.08.004 Application of FEM to tool design for electrochemical machining freeform surface
Journal of Micromechanics and Microengineering Bo Hyun 16 4 p843 2006 10.1088/0960-1317/16/4/022 Fabrication of multiple electrodes by reverse EDM and their application in micro ECM
The International Journal of Advanced Manufacturing Technology Wang 41 1 42 2009 10.1007/s00170-008-1456-y Fabrication of multiple electrodes and their application for micro-holes array in ECM
Journal of Micromechanics and Microengineering Min Soo 17 8 1451 2007 10.1088/0960-1317/17/8/006 Micro-electrochemical machining using multiple tool electrodes
10.1016/S0924-0136(02)00567-8 Zhu, D. and H.Y. Xu, Improvement of electrochemical machining accuracy by using dual pole tool. Journal of Materials Processing Technology, 2002. 129(1-3): p. 15-18.
10.4028/www.scientific.net/AMR.60-61.380 Liu, G.H., et al., Research on Side-Insulation of Tool Electrode for Micro Electrochemical Machining. Advanced Materials Research, 2009. 60-61: p. 380-387.
CIRP Annals - Manufacturing Technology Park 55 1 197 2006 10.1016/S0007-8506(07)60397-7 The Effects of Tool Electrode Size on Characteristics of Micro Electrochemical Machining
Journal of Materials Processing Technology Wang 210 2 238 2010 10.1016/j.jmatprotec.2009.09.006 Electrochemical drilling with vacuum extraction of electrolyte
CIRP Annals - Manufacturing Technology Zhu 59 1 239 2010 10.1016/j.cirp.2010.03.135 Electrochemical drilling of multiple holes with electrolyte-extraction
International Journal of Machine Tools and Manufacture Bhattacharyya 47 2 335 2007 10.1016/j.ijmachtools.2006.03.005 Influence of tool vibration on machining performance in electrochemical micro-machining of copper
CIRP Journal of Manufacturing Science and Technology Mithu 5 3 202 2012 10.1016/j.cirpj.2012.07.006 On how tool geometry, applied frequency and machining parameters influence electrochemical microdrilling
Precision Engineering Natsu 31 1 33 2007 10.1016/j.precisioneng.2006.02.004 Generating complicated surface with electrolyte jet machining
CIRP Journal of Manufacturing Science and Technology Natsu 1 1 27 2008 10.1016/j.cirpj.2008.06.006 Research on generation of three-dimensional surface with micro-electrolyte jet machining
CIRP Annals - Manufacturing Technology Kunieda 60 1 251 2011 10.1016/j.cirp.2011.03.022 Electrochemical micromachining using flat electrolyte jet
Precision Engineering Hackert-Oschätzchen 36 4 612 2012 10.1016/j.precisioneng.2012.05.003 Micro machining with continuous electrolytic free jet
10.1088/0960-1317/18/7/075009 Hong Shik, S., K. Bo Hyun, and C. Chong Nam, Analysis of the side gap resulting from micro electrochemical machining with a tungsten wire and ultrashort voltage pulses. Journal of Micromechanics and Microengineering, 2008. 18(7): p. 075009.
Enhancement of mass transport in micro wire electrochemical machining. CIRP Annals - Manufacturing Technology Zeng 61 1 195 2012
Wang, K. and Z. Zhang. Gap status identification and control of wire electrochemical micromachining. in 2011 2nd International Conference on Mechanic Automation and Control Engineering, MACE 2011, July 15, 2011 - July 17, 2011. 2011. Inner Mongolia, China: IEEE Computer Society.
CIRP Annals - Manufacturing Technology Zhu 56 1 241 2007 10.1016/j.cirp.2007.05.057 Micro Wire Electrochemical Cutting by Using In Situ Fabricated Wire Electrode
10.1007/s00170-011-3858-5 Wang, S., et al., Micro wire electrochemical machining with an axial electrolyte flow. 2011: p. 1-8.
International Journal of Machine Tools and Manufacture Kurita 48 15 1599 2008 10.1016/j.ijmachtools.2008.07.013 Mechanical/electrochemical complex machining method for efficient, accurate, and environmentally benign process
10.1016/j.jmatprotec.2007.04.016 Pa, P.S., Electrode form design of large holes of die material in ultrasonic electrochemical finishing. Journal of Materials Processing Technology, 2007. 192-193(0): p. 470-477.
Precision Engineering Zeng 36 3 500 2012 10.1016/j.precisioneng.2012.01.005 A study of micro-EDM and micro-ECM combined milling for 3D metallic micro-structures
International Journal of Machine Tools and Manufacture Nguyen 54-55 0 55 2012 10.1016/j.ijmachtools.2011.11.005 Simultaneous micro-EDM and micro-ECM in low-resistivity deionized water
CIRP Annals - Manufacturing Technology Nguyen 61 1 191 2012 10.1016/j.cirp.2012.03.011 Enhanced surface integrity and dimensional accuracy by simultaneous micro- ED/EC milling
Precision Engineering Pajak 30 3 288 2006 10.1016/j.precisioneng.2005.09.006 Precision and efficiency of laser assisted jet electrochemical machining
CIRP Annals - Manufacturing Technology Stephen 59 1 251 2010 10.1016/j.cirp.2010.03.069 Mechanisms and processing limits in laser thermochemical machining
CIRP Annals - Manufacturing Technology De Silva 60 1 243 2011 10.1016/j.cirp.2011.03.132 Thermal effects in laser assisted jet electrochemical machining
Optics and Lasers in Engineering Kasashima 50 3 354 2012 10.1016/j.optlaseng.2011.10.022 Laser and electrochemical complex machining of micro-stent with on-machine three-dimensional measurement
CIRP Annals - Manufacturing Technology Curtis 58 1 173 2009 10.1016/j.cirp.2009.03.074 Electrochemical superabrasive machining of a nickel-based aeroengine alloy using mounted grinding points
CIRP Annals - Manufacturing Technology Zhu 60 1 247 2011 10.1016/j.cirp.2011.03.130 Precision machining of small holes by the hybrid process of electrochemical removal and grinding
The International Journal of Advanced Manufacturing Technology Skoczypiec 52 5 565 2011 10.1007/s00170-010-2774-4 Research on ultrasonically assisted electrochemical machining process
Electrochimica Acta Pa 54 25 6022 2009 10.1016/j.electacta.2009.01.063 Super finishing with ultrasonic and magnetic assistance in electrochemical micro-machining
Kozak, J. m, Hybrid Manufacturing Technology using Electrochemical Machining processes, Proceedings of the International Symposium on Electrochemical Machining Technology, INSECT, 2012.
Skrabalak, G., Zybura, M., and Kozak, J., Optimization of Electrochemical Discharge Machining Process. Proceedings of ISEM XVI, Shanghai, China, 2010. p: 491-496.
Manufacturing Technology Zhu 60 1 247 2011 Precision Machining of Small Holes by the Hybrid Process of Electrochemical Removal and Grinding. CIRP Annals
Manufacturing Technology Kunieda 60 1 251 2011 Electrochemical Micromachining Usinf Flat Electrolyte Jet. CIRP Annals
10.1016/j.jmatprotec.2003.11.060 Schumacher, B.M., After 60 years of EDM the discharge process remains still disputed. Journal of Materials Processing Technology, 2004. 149(1-3): p. 376-381.
CIRP Annals - Manufacturing Technology Kunieda 54 2 64 2005 10.1016/S0007-8506(07)60020-1 Advancing EDM through Fundamental Insight into the Process
Precision Engineering Yang 35 1 51 2011 10.1016/j.precisioneng.2010.09.005 Molecular dynamics simulation of the material removal mechanism in micro-EDM
International Journal of Machine Tools and Manufacture Yan 47 11 1686 2007 10.1016/j.ijmachtools.2007.01.006 Surface quality improvement of wire- EDM using a fine-finish power supply
10.1016/j.jmatprotec.2008.04.029 Jahan, M.P., Y.S. Wong, and M. Rahman, A study on the quality micro-hole machining of tungsten carbide by micro-EDM process using transistor and RC-type pulse generator. Journal of Materials Processing Technology, 2009. 209(4): p. 1706-1716.
10.1088/0960-1317/18/10/105014 Sheu, D.Y., High-speed micro electrode tool fabrication by a twin-wire EDM system. Journal of Micromechanics and Microengineering, 2008. 18: p. 105014.
10.1016/S0007-8506(07)61302-X Snoeys, R., Dauw, D., and Kruth, J.P., Improved Adaptive Control System for EDM. Annals of the CIRP, 1980. 29(1): p. 97-101.
ASME PED Snoeys 22 63 1986 Adaptive Control Optimization as Basis for Inteligent EDM Die Sinking Machines. Advances in Non-Traditional Machining
Annals of the CIRP Rajurkar 38 1 183 1989 10.1016/S0007-8506(07)62680-8 A New Model Reference Adaptive Control of EDM
10.1016/S0007-8506(07)62680-8 Rajurkar, K.P., Wang, W.M., Real Time Stochastic Model and Control of EDM. Annals of the CIRP, 1990. 39(1): p. 183-186.
Annals of the CIRP Kinoshita 31 1 111 1982 10.1016/S0007-8506(07)63279-X Control of Wire-EDM Preventing Electrode from Breaking
Jiang, Y, et al., Monitoring of EDM gap discharge status with wavelet transorm method, Proceedingss of the 16th ISEM, 2010, p. 211-216.
Hsue, A.W., & Chung, C.H., Effective Pulses Discriminator and Direct-Drive Jump Control for High Efficiency Electrical Discharge Machining (EDM) Processes. In Proceedings of the 16th International Symposium on Electro machining. 2010, p. 175-182.
International Journal of Machine Tools and Manufacture Fujiki 51 1 77 2011 10.1016/j.ijmachtools.2010.09.002 Gap control for near-dry EDM milling with lead angle
Bulletin of Materials Science Khanra 32 4 401 2009 10.1007/s12034-009-0058-0 Application of new tool material for electrical discharge machining (EDM)
CIRP Annals - Manufacturing Technology Tanabe 60 1 227 2011 10.1016/j.cirp.2011.03.108 Development of peeling tool for micro-EDM
International Journal of Machine Tools and Manufacturing Gu 53 100 2012 10.1016/j.ijmachtools.2011.10.002 Electrical Discharge Machining of Ti6Al4V with Bundled Electrode
10.4028/www.scientific.net/KEM.447-448.282 Jianhong Zhao, M.K., Guilin Yang and Xue-Ming Yuan, Performance of Bunched-Electrode in EDM. Key Engineering Materials (Volumes 447-448), 2010. Advances in Precision Engineering: p. 282-286.
10.4028/www.scientific.net/AMR.148-149.471 Xianghua Liu, Z.J.a.J.H., Experimental Investigation on Air- Aided Water EDM. Advanced Materials Research (Volumes 148-149), 2010. Manufacturing Processes and Systems: p. 471-474.
10.4028/www.scientific.net/AMR.500.253 Chuanzhen Huang, H.Z., Jun Wang and Xiaoping Li, Powder Mixed near Dry Electrical Discharge Machining. Advanced Materials Research (Volume 500), 2012. Advances in Materials Processing X.
CIRP Annals - Manufacturing Technology Kim 56 1 233 2007 10.1016/j.cirp.2007.05.055 Electrical Discharge Machining of Carbon Nanofiber for Uniform Field Emission
Annals of the CIRP Kruth 44 1 169 1995 10.1016/S0007-8506(07)62299-9 Study of the White Layer of a Surface Machined by Die-Sinking Electro- Discharge Machining
Journal of Materials Processing Technology Liao 149 13 p.165 2004 10.1016/j.jmatprotec.2003.10.034 A Study to Achieve a Fine Surface Finish in Wire-EDM
Yu, Z.Y., Rajurkar, K.P., Narasiham, J., Effect of Machining Parameters on Micro EDM and Surface Integrity. Proceeding of the 18th Annual Meeting of American Society for Precision Engineering, Portland, Oregan, 2003.
Materials Transaction Lee 44 12 2718 2003 10.2320/matertrans.44.2718 Surface Integrity in Micro-Hole Drilling Using Micro-Electro Discharge Machining
CIRP Annals - Manufacturing Technology Aspiwall 57 1 187 2008 10.1016/j.cirp.2008.03.054 Workpiece Surface Roughness and Integrity after WEDM of Ti- 6Al-4V and Inconel 718 Using Minimum Damage Generator Technology
10.1016/j.ijrmhm.2009.05.003 Patel K. M., P. M. Pandey, and P. Venkateswara Rao, Surface integrity and material removal mechanisms associated with the EDM of Al2O3 ceramic composite. International Journal of Refractory Metals and Hard Materials, 2009. 27(5): p. 892-899.
10.1016/j.proeng.2011.11.098 Klink, A., Guo, Y.B., Klocke, F., Surface Integrity Evaluation of Powder Metallurgical Tool Steel by Main Cut and Finishing Trim Cuts in Wire-EDM. 1st CIRP Conference on Surface Intigrity, 2011. Procedia Engineering 19: p.178-183.
Klocke, F., Welling, D., Dieckmann, J., Klink, A., Titanium Parts for Medical Sector Made by Wire-EDM. Proceedings of the 1st International Conference on Design and Processes, 2012.
10.1016/j.proeng.2011.11.099 Klocke, F., Welling, D., Dieckmann, J., Comparison of grinding and Wire EDM Concerning Fatigue Strength and Surface Integrity of Machined Ti6Al4V Components. 1st CIRP Conference on Surface Intigrity, 2011. Procedia Engineering 19: p. 184-189.
10.1016/S0007-8506(07)63451-9 Masuzawa, T., State of the Art of Micromachining. Annals of the CIRP, 2000. 49(2): p. 473-488.
10.1016/j.cirp.2006.10.002 Rajurkar, K.P., Levy, G., Malshe, A., Sundaram, M.M., McGeough, J., Hu, X., Resnick, R., DeSilva, A., Micro and nano machining by electro-physical and chemical processes. CIRP Annals-Manufacturing Technology, 2006. 55(2): p. 643-666.
Yu, Z., Rajurkar, K.P., Shen, H., Drilling of Circular Blind Micro Holes by Micro EDM. Transactions of the NAMRI/SME, 2002. 30: p. 263-270.
10.2526/ijem.3.7 Yu, Z.Y., Masuzawa, T., Fujino, M., 3D Micro-EDM with Simple Shape Electrode Part1. International Journal of Electrical Machining, 1998. 3: p. 7-12.
Sharma, A., Iwai, M., Kawanaka, K., Suzuki, K., Uematsu, T., Attempt at EDM of Electrically Conductive Diamond and its Application to Miniature Model Processing. 7th International Symposium on Advances in Abrasive Technology, Bursa, Turkey, 2004. P. 565-568.
10.1016/j.jmatprotec.2004.02.043 Tsai, Y.-Y., Masuzawa, T., An Index to Evaluate the Wear Resistance of Electrode in Micro-EDM. Journal of Materials Processing Technology, 2004. 149(1-3): p.304-309.
Micro-EDM for Three-Dimensional Cavities - Development of Uniform Wear Method Annals of the CIRP Yu 47 1 169 1998
Kata Gijutsu Yuzawa 12 8 104 1997 Micro Electrice Discharge Scanning Using a Mini-Size Cylindrical Electrode
10.1016/S0007-8506(07)61489-9 Bleys, P., Kruth, J. -P., Lauwers, B., Zryd, A., Delpretti, R., Tricarico, C., Real-Time Tool Wear Compensation in Milling EDM. Annals of the CIRP, 2002. 51(1): p. 157-160.
Narasimhan, J., Yu, Z., Rajurkar, K.P., Tool Wear Compensation and Path Generation in Micro and Macro EDM. Transaction of NAMRI/SME, 2004. 32: p. 151-158.
CIRP Annals - Manufacturing Technology Yu 58 1 213 2009 10.1016/j.cirp.2009.03.111 High aspect ratio micro-hole drilling aided with ultrasonic vibration and planetary movement of electrode by micro-EDM
10.1088/0960-1317/15/8/024 Liao, Y.S., et al., Fabrication of high aspect ratio microstructure arrays by micro reverse wire-EDM. Journal of Micromechanics and Microengineering, 2005. 15: p. 1547.
The International Journal of Advanced Manufacturing Technology Liu 47 1 11 2010 10.1007/s00170-009-2056-1 Process capabilities of Micro-EDM and its applications
10.1016/j.proeng.2011.11.100 Klocke, F., et al., EDM Machining Capabilities of Magnesium (Mg) Alloy WE43 for Medical Applications. Procedia Engineering, 2011. 19(0): p. 190-195.
10.1016/j.mee.2009.11.087 Lin, C.-S., et al., Fabrication of micro ball joint by using micro- EDM and electroforming. Microelectronic Engineering, 2010. 87(5-8): p. 1475-1478.
10.1016/S0007-8506(07)60077-8 Malshe, A., et al., Investigation of nano-scale electro machining (nano-EM) in Dielectric Oil, CIRP Annals-Manufacturing Technology, 54, 2005, p. 175-178.
10.1016/j.cirp.2007.05.098 Virwani, K.R., et al., Understanding Dielectric Breakdown and Related Tool Wear Characteristics in Nanoscale Electro- Machining, CIRP Annals-Manufacturing Technology, 56, 2007, p. 217-220.
Jahan, M., et al., Experimental Investigation and Characterization of Nano-scale Dry Electro-machining, Proceedings of NAMRI/SME, 40, 2012. p.
10.1016/j.jmapro.2012.08.004 Jahan M., Malshe A., Rajurkar K., Experimental Investigation and Characterization of Nano-scale Dry Electro-machining, Journal of Manufacturing Processes, Vol. 14 (2012) pgs. 443-451.
10.1016/j.cirp.2007.05.051 Kunieda, M., Study of Nano EDM Using Capacity Coupled Pulse Generator, CIRP Annals-Manufacturing Technology, 56, 2007, p. 213-216.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.