최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Procedia CIRP, v.6, 2013년, pp.320 - 325
Teicher, U. , Muller, S. , Munzner, J. , Nestler, A.
Due to the inhomogeneous material structure, micromachining of fibre reinforced plastics places high requirements on machining processes. Using the hole drilling machining of carbon fibre reinforced plastics as an example, experiments on electro discharge machinability were carried out by means of s...
10.1016/S0924-0136(99)00040-0 Rahman, M.; Ramakrishna, S.; Prakash, J.R.S.; Tan, D.C.G. (1999): Machinability st udy of carbon fiber reinforced composite. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 90, H. Sp. Iss. SI, pp. 292 297.
10.1016/j.compositesa.2009.11.006 Khashaba, U.A.; El-Sonbat y, I.A.; Selmy, A.I.; Megahed, A.A. (2010): Machinabilit y analysis in drilling woven GFR/epoxy composit es: Part I - Effect of machining paramet ers. In: COMPOSITES PART A-APPLIED SCIENCE AND MANUFACT URING, Vol. 41, Issue 3, pp. 391 400.
10.1016/j.jmatprotec.2006.11.146 Abrao, A.M.; Faria, P.E.; Rubio, J.C. Campos; Reis, P.; Davim, J. Paulo (2007): Drilling of fiber reinforced plast ics: A review. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 186, Issue 1-3, pp. 1 7.
10.1016/j.jmatprotec.2007.10.050 Gait onde, V.N.; Karnik, S.R.; Rubio, J. Campos; Correia, A. Esteves; Abrao, A.M.; Davim, J. Paulo (2008): Analysis of paramet ric influence on delaminat ion in high-speed drilling of carbon fiber reinforced plast ic composit es. In: JOURNAL OF MATERIALS PROCESSING T ECHNOLOGY, Vol. 203, Issue 1-3, pp. 431 438.
10.1016/S0263-8223(01)00040-X Lachaud, F.; Piquet, R.; Collombet, F.; Surcin, L. (2001): Drilling of composit e struct ures In: COMPOSITE remove-image>ST RUCT URES, Vol. 52, Issue 3-4, pp. 511 516.
10.1016/j.ijmachtools.2005.05.015 Chae, J.; Park, S.S.; Freiheit, T. (2006): Invest igat ion of micro- cutt ing operat ions. In: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol. 46, Issue 3-4, pp. 313 332.
10.1016/S0263-8223(97)00068-8 Inoue, H.; Aoyama, E.; Hirogaki, T.; Ogawa, K.; Mat ushit a, H.; Kitahara, Y.; Kat ayama, T. (1997): Influence of t ool wear on int ernal damage in small diamet er drilling in GFRP. In:;1; COMPOSITE ST RUCT URES, Vol. 39, Issue 1-2, pp. 55 62.
10.1016/S0263-8223(97)00069-X Ogawa, K.; Aoyama, E.; Inoue, H.; Hirogaki, T.; Nobe, H.; Kitahara, Y. et al. (1997): Investigat ion on cutt ing mechanism in small diamet er drilling for GFRP (thrust force and surface roughness at drilled hole wall). In: COMPOSITE ST RUCT URES, Vol. 38, Issue 1-4, pp. 343 350.
10.1016/0924-0136(94)01650-P Lau, W.S.; Yue, T.M.; Lee, T.C.; Lee, W.B. (1995): Un- Convent ional Machining of Composit e-Mat erials. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 48, Issue 1-4, pp. 199 205.
10.1016/0890-6955(90)90138-9 Lau, W.S.; Wang, M.; Lee, W.B. (1990): Electrical-Discharge Machining of Carbon-Fiber Composit e-Materials. In: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACT URE, Vol. 30, Issue 2, pp. 297 308.
10.1016/S0890-6955(03)00162-7 Ho, K.H.; Newman, S.T. (2003): Stat e of t he art elect rical discharge machining (EDM). In: INTERNATIONAL JOURNAL OF MACHINE T OOLS & MANUFACT URE, Vol. 43, Issue 13, pp. 1287 1300.
10.1080/10426919808935223 Hocheng, H.; Guu, Y.H.; Tai, N.H. (1998): The feasibility analysis of elect rical-discharge machining of carbon-carbon composit es. In: MATERIALS AND MANUFACTURINGPROCESSE S, Vol. 13, Issue 1, pp. 117 132.
10.1023/A:1017539100832 Guu, Y.H.; Hocheng, H.; Tai, N.H.; Liu, S.Y. (2001): Effect of elect rical discharge machining on the characterist ics of carbon fiber reinforced carbon composit es. In: JOU RNAL OF MATERIALS SCIENCE, Vol. 36, Issue 8, pp. 2037 2043.
10.1016/S0924-0136(03)00863-X George, P.M.; Raghunat h, B.K.; Manocha, L.M.; Am Warrier (2004): EDM machining of carbon-carbon composite - a T aguchi approach. In: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, Vol. 145, Issue 1, pp. 66 71.
10.1016/j.ijmachtools.2006.08.026 Abbas, Norliana Mohd; Solomon, Darius G.; Bahari, Md Fuad (2007): A review on current research t rends in elect rical discharge machining (EDM). In: INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, Vol. 47, Issue 7-8, pp. 1214 1228.
10.1007/s00170-006-0483-9 Han, Fuzhu; Chen, Li; Yu, Dingwen; Zhou, Xiaoguang (2007): remove-image>Basic st udy on pulse generat or for micro-EDM. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACT URING TECHNOLOGY, Vol. 33, Issue. 5-6, pp. 474 479.
10.1007/s00170-009-2056-1 Liu, Kun; Lauwers, Bert; Reynaert s, Dominiek (2010): Process capabilit ies of Micro-EDM and it s applicat ions. In: INTERNATIONAL JOURNAL OF ADVANCED MANUFACT URING T ECHNOLOGY, Vol. 47, Issue. 1-4, Sp. Iss. SI, S. 11 19.
König, Wilfried (1990): Fert igungsverfahren Band 3: Abt ragen. 2., neubearb. und erw. Aufl. Düsseldorf: VDI-Verl. (St udium und Praxis,/Wilfried König; Issue. 3).
ISO 3274, 1996: Geomet rical Product Specificat ions (GPS) - Surface t ext ure: Profile met hod - Nominal charact erist ics of cont act (stylus) instrument s.
ISO 4288, 1996: Geomet rical Product Specificat ions (GPS) - Surface t ext ure: Profile met hod - Rules and procedures for t he assessment of surface t ext ure.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
※ AI-Helper는 부적절한 답변을 할 수 있습니다.