Xian-Xu Bai
(Dept. of Aerosp. Eng., Univ. of Maryland, College Park, MD, USA)
,
Wei Hu
(Dept. of Aerosp. Eng., Univ. of Maryland, College Park, MD, USA)
,
Wereley, Norman M.
(Dept. of Aerosp. Eng., Univ. of Maryland, College Park, MD, USA)
This study presents the design, fabrication, and test of a magnetorheological (MR) damper utilizing an inner bypass that can simultaneously produce large dynamic range (i.e., ratio of field-on to field-off stroking load) and low field-off stroking load at high piston velocity. These two damper prope...
This study presents the design, fabrication, and test of a magnetorheological (MR) damper utilizing an inner bypass that can simultaneously produce large dynamic range (i.e., ratio of field-on to field-off stroking load) and low field-off stroking load at high piston velocity. These two damper properties, large dynamic range and low field-off stroking load, are critical to achieving high performance in ground vehicle suspensions. The MR damper is comprised of a pair of concentric tubes, a movable piston-shaft arrangement, and an annular MR fluid flow gap between the concentric tubes. The inner tube serves as the piston guide, the inner surface of the annular flow gap, and the bobbin for the five electromagnetic coils used in this design. The outer tube serves as the flux return and the outer surface of the annular flow gap. The annular flow gap is an inner bypass annular valve where the rheology of the MR fluids, and hence the stroking load of the damper, is controlled. The MR damper is analyzed using a Bingham-plastic nonlinear fluid mechanics model. To experimentally validate the analysis of the MR damper with the inner bypass, and to illustrate its advantages over the MR damper with the conventional annular orifice, the prototype damper is tested in terms of controllable damping force or stroking load, dynamic range, and equivalent damping as a function of shaft/piston velocity.
This study presents the design, fabrication, and test of a magnetorheological (MR) damper utilizing an inner bypass that can simultaneously produce large dynamic range (i.e., ratio of field-on to field-off stroking load) and low field-off stroking load at high piston velocity. These two damper properties, large dynamic range and low field-off stroking load, are critical to achieving high performance in ground vehicle suspensions. The MR damper is comprised of a pair of concentric tubes, a movable piston-shaft arrangement, and an annular MR fluid flow gap between the concentric tubes. The inner tube serves as the piston guide, the inner surface of the annular flow gap, and the bobbin for the five electromagnetic coils used in this design. The outer tube serves as the flux return and the outer surface of the annular flow gap. The annular flow gap is an inner bypass annular valve where the rheology of the MR fluids, and hence the stroking load of the damper, is controlled. The MR damper is analyzed using a Bingham-plastic nonlinear fluid mechanics model. To experimentally validate the analysis of the MR damper with the inner bypass, and to illustrate its advantages over the MR damper with the conventional annular orifice, the prototype damper is tested in terms of controllable damping force or stroking load, dynamic range, and equivalent damping as a function of shaft/piston velocity.
참고문헌 (11)
10.1155/2001/674830
10.1115/SMASIS2012-8189
Mao, Min, Hu, Wei, Choi, Young-Tai, Wereley, Norman M..
A Magnetorheological Damper with Bifold Valves for Shock and Vibration Mitigation.
Journal of intelligent material systems and structures,
vol.18,
no.12,
1227-1232.
Wang, D. H., Liao, W. H..
Semi-active suspension systems for railway vehicles using magnetorheological dampers. Part I: system integration and modelling.
Vehicle system dynamics,
vol.47,
no.11,
1305-1325.
Proc SPIE Smart Mat and Struct Conf Effective design strategy for a magnetorheological damper using a nonlinear flow model mao 2005 5760 446
Dogruer, Umit, Gordaninejad, Faramarz, Evrensel, Cahit A..
A New Magneto-rheological Fluid Damper for High-mobility Multi-purpose Wheeled Vehicle (HMMWV).
Journal of intelligent material systems and structures,
vol.19,
no.6,
641-650.
Wang, D. H., Liao, W. H..
Semi-active suspension systems for railway vehicles using magnetorheological dampers. Part II: simulation and analysis.
Vehicle system dynamics,
vol.47,
no.12,
1439-1471.
Hiemenz, Gregory J., Choi, Young-Tai, Wereley, Norman M..
Semi-Active Control of Vertical Stroking Helicopter Crew Seat for Enhanced Crashworthiness.
Journal of aircraft,
vol.44,
no.3,
1031-1034.
Wei Hu, Cook, E., Wereley, N.M..
Energy Absorber Using a Magnetorheological Bypass Valve Filled With Ferromagnetic Beads.
IEEE transactions on magnetics,
vol.43,
no.6,
2695-2697.
HU, WEI, WERELEY, NORMAN M..
MAGNETORHEOLOGICAL FLUID AND ELASTOMERIC LAG DAMPER FOR HELICOPTER STABILITY AUGMENTATION.
International journal of modern physics. B, Condensed matter physics, statistical physics, applied physics,
vol.19,
no.7,
1471-1477.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.