다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
International journal of fatigue, v.59, 2014년, pp.224 - 233
Li, S. , Kahraman, A.
AI-Helper
This paper proposes a physics-based model to predict the micro-pitting behavior on contact surfaces of spur gears operating under the mixed lubrication condition. The transient mixed elastohydrodynamic lubrication model of Li and Kahraman [1] developed for spur gears is employed to predict surface n...
J Tribol Li 132 1 011501 2010 10.1115/1.4000270 A transient mixed elastohydrodynamic lubrication model for spur gear pairs
ASTM Spec Tech Publ Tokuda 771 150 1982 Observations of the peeling mode of failure and surface-originated flaking from a ring-to-ring rolling contact fatigue test rig, rolling contact fatigue testing of bearing steels
Wear Ariura 87 305 1983 10.1016/0043-1648(83)90134-5 An investigation of surface failure of surface-hardened gears by scanning electron microscopy observations
Int J Fatigue Li 48 9 2013 10.1016/j.ijfatigue.2012.12.003 Micro-pitting fatigue lives of lubricated point contacts: experiments and model validation
J Eng Tribol Qiao 222 3 381 2008 Comparison of fatigue model results for rough surface elastohydrodynamic lubrication
J Tribol Zhu 131 041501 2009 10.1115/1.3195040 Pitting life prediction based on a 3D line contact mixed EHL analysis and subsurface von Mises stress calculation
Int J Fatigue Li 33 3 427 2011 10.1016/j.ijfatigue.2010.09.021 A fatigue model for contacts under mixed elastohydrodynamic lubrication condition
J Mech Des Li 134 4 041007 2012 10.1115/1.4005655 A fatigue model for spur gear contacts operating under mixed elastohydrodynamic lubrication conditions
Int J Fatigue Li 47 205 2013 10.1016/j.ijfatigue.2012.09.002 A physics-based model to predict micro-pitting lives of lubricated point contacts
Wear Sellgren 254 1180 2003 10.1016/S0043-1648(03)00332-6 A finite element-based model of normal contact between rough surfaces
J Strain Anal Leahy 34 4 235 1999 10.1243/0309324991513786 A quadratic boundary element formulation for three-dimensional contact problems with friction
J Strain Anal Wang 39 4 371 2004 10.1243/0309324041223944 Boundary element analysis of contact problems using inverse techniques - linear and quadratic elements
Comput Geotech Davies 19 2 137 1996 10.1016/0266-352X(95)00039-D Infinite boundary elements for the analysis of halfspace problems
Int J Numer Meth Eng Moser 61 3 317 2004 10.1002/nme.1073 Mapped infinite elements for three-dimensional multi-region boundary element analysis
Eng Anal Bound Elem Salvadori 32 122 2008 10.1016/j.enganabound.2007.06.007 Infinite boundary elements in 2D elasticity
Fatigue Fract Eng Mater Struct Fajdiga 26 1135 2003 10.1046/j.1460-2695.2003.00711.x Numerical modeling of micro-pitting of gear teeth flanks
Wear Fajdiga 262 1217 2007 10.1016/j.wear.2006.11.016 Pitting formation due to surface and subsurface initiated fatigue crack growth in contacting mechanical components
Philos Mag A Navarro 57 15 1988 10.1080/01418618808204496 Short and long fatigue crack growth: a unified model
LDP 2012 Gear load distribution program gear and power transmission research laboratory
J Eng Ind Conry 95 11 1115 1973 10.1115/1.3438259 A mathematical programming technique for the evaluation of load distribution and optimal modifications for gear systems
J Tribol Cheng 116 2 1994 10.1115/1.2927042 Micromechanics modeling of crack initiation under contact fatigue
Tribol Int Li 60 233 2013 10.1016/j.triboint.2012.11.007 A model to predict scuffing failures of a ball-on-disk contact
J Eng Tribol Li 225 8 740 2011 Influence of dynamic behavior on elastohydrodynamic lubrication of spur gears
10.1016/j.jsv.2013.04.022 Li S, Kahraman A. A tribo-dynamic model of a spur gear pair. J Sound Vibr; 2013 [in review].
Tribol Trans Li 53 4 554 2010 10.1080/10402000903502279 Prediction of spur gear mechanical power losses using a transient elastohydrodynamic lubrication model
J Adv Mech Des, Syst Manuf Li 5 4 252 2011 10.1299/jamdsm.5.252 A method to derive friction and rolling power loss formulae for mixed EHL contacts
JSME Int J, Series III Kaneta 35 4 535 1992 Effects of surface roughness in elastohydrodynamic lubrication
Johnson 1985 Contact mechanics
Dowson 1977 Elasto-hydrodynamic lubrication, SI ed
Becker AA. The boundary element method in engineering: a complete course. Mcgraw-Hill Book Company; 1992.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.