마이오세 어일분지에는 분지 형성 중 일어난 화산활동에 의해 화산암 및 화산쇄설암이 풍부히 나타난다. 전촌응회구는 약 25 m 두께의 현무암질 화산력 응회암으로 구성되어 있으며 어일분지 중앙에 나타난다. 전촌응회구 아래에는 하위로부터 파호이호이 용암(하부어일현무암), 호성 이암 그리고 하구사주 사암이 나타나고 있어 수성화산활동은 얕은 호수에서 일어난 것으로 해석된다. 전촌응회구는 괴상 응회질 각력암(TBm), 층상 화산력 응회암(LTb), 역-정점이층리 화산력 응회암(LTin), 정점이층리 화산력 응회암(LTn), 괴상 조립질 응회암(CTm), 괴상 중립질-세립질 응회암(MTm & FTm) 등 7개의 퇴적상으로 구성되며, 퇴적상 특성과 입자조성에 따라 5개의 퇴적단위(하부로부터 단위 Ⅰ에서 Ⅴ)로 구분된다. 약 4 m 두께의 단위 Ⅰ은 석영 입자를 포함하는 괴상응회암(FTm & MTm)으로 이루어져 있으며 하구사주 내에서 일어난 접촉면증기폭발(contact-surface steam explosivity)의 산물로 해석된다. 단위 Ⅱ(약 1.5 m)는 이질 현무암편을 다량 포함하는 점이층리 화산력 응회암(LTin & LTn)으로 이루어져 있으며, 하부어일현무암 내에서 일어난 일괄반응증기폭발(bulk-interaction steam explosivity)의 산물로 해석된다. 퇴적은 현무암편의 탄도성 낙하와 화쇄난류에 의해 일어난 것으로 해석된다. 단위 Ⅲ은 응회질 각력암(TBm; 약 3.5 m)과 상부의 층상 화산력 응회암(LTb; 약 0.5 m)으로 구성되어 있으며, 화구를 확장시키는 폭발에 의해 대량의 주변암편이 뜯겨온 후 쇄설류와 섯치형 낙하에 의해 퇴적된 것으로 해석된다. 괴상 조립질 응회암(CTm)으로 이루어진 단위 Ⅳ(약 0.8 m)는 화산분출 휴지기 때 화산쇄설물이 쇄설류에 의해 재퇴적된 것으로 해석된다. 층상 화산력 응회암(LTb)으로 구성된 단위 Ⅴ(약 15 m)는 기층 굴착이 거의 없이 섯치형 화산쇄설물 분사가 지속되어 쌓인 것으로 해석된다. 전촌응회구의 수직암상변화는 퇴적환경, 기층의 종류(모래 대 용암) 그리고 화구의 형태에 따라 응회구가 성장하는 동안 다양한 분출작용과 퇴적작용이 발생할 수 있음을 보여준다.
마이오세 어일분지에는 분지 형성 중 일어난 화산활동에 의해 화산암 및 화산쇄설암이 풍부히 나타난다. 전촌응회구는 약 25 m 두께의 현무암질 화산력 응회암으로 구성되어 있으며 어일분지 중앙에 나타난다. 전촌응회구 아래에는 하위로부터 파호이호이 용암(하부어일현무암), 호성 이암 그리고 하구사주 사암이 나타나고 있어 수성화산활동은 얕은 호수에서 일어난 것으로 해석된다. 전촌응회구는 괴상 응회질 각력암(TBm), 층상 화산력 응회암(LTb), 역-정점이층리 화산력 응회암(LTin), 정점이층리 화산력 응회암(LTn), 괴상 조립질 응회암(CTm), 괴상 중립질-세립질 응회암(MTm & FTm) 등 7개의 퇴적상으로 구성되며, 퇴적상 특성과 입자조성에 따라 5개의 퇴적단위(하부로부터 단위 Ⅰ에서 Ⅴ)로 구분된다. 약 4 m 두께의 단위 Ⅰ은 석영 입자를 포함하는 괴상응회암(FTm & MTm)으로 이루어져 있으며 하구사주 내에서 일어난 접촉면증기폭발(contact-surface steam explosivity)의 산물로 해석된다. 단위 Ⅱ(약 1.5 m)는 이질 현무암편을 다량 포함하는 점이층리 화산력 응회암(LTin & LTn)으로 이루어져 있으며, 하부어일현무암 내에서 일어난 일괄반응증기폭발(bulk-interaction steam explosivity)의 산물로 해석된다. 퇴적은 현무암편의 탄도성 낙하와 화쇄난류에 의해 일어난 것으로 해석된다. 단위 Ⅲ은 응회질 각력암(TBm; 약 3.5 m)과 상부의 층상 화산력 응회암(LTb; 약 0.5 m)으로 구성되어 있으며, 화구를 확장시키는 폭발에 의해 대량의 주변암편이 뜯겨온 후 쇄설류와 섯치형 낙하에 의해 퇴적된 것으로 해석된다. 괴상 조립질 응회암(CTm)으로 이루어진 단위 Ⅳ(약 0.8 m)는 화산분출 휴지기 때 화산쇄설물이 쇄설류에 의해 재퇴적된 것으로 해석된다. 층상 화산력 응회암(LTb)으로 구성된 단위 Ⅴ(약 15 m)는 기층 굴착이 거의 없이 섯치형 화산쇄설물 분사가 지속되어 쌓인 것으로 해석된다. 전촌응회구의 수직암상변화는 퇴적환경, 기층의 종류(모래 대 용암) 그리고 화구의 형태에 따라 응회구가 성장하는 동안 다양한 분출작용과 퇴적작용이 발생할 수 있음을 보여준다.
The Miocene Eoil Basin, SE Korea, contains abundant volcanic and volcaniclastic deposits because of active volcanism during basin formation. The Jeonchon tuff cone refers to an about 25 m-thick sequence of basaltic lapilli tuff in the central part of the basin. The tuff cone is underlain by pahoehoe...
The Miocene Eoil Basin, SE Korea, contains abundant volcanic and volcaniclastic deposits because of active volcanism during basin formation. The Jeonchon tuff cone refers to an about 25 m-thick sequence of basaltic lapilli tuff in the central part of the basin. The tuff cone is underlain by pahoehoe lavas (the Lower Eoil Basalt), lacustrine mudstone, and mouth-bar sandstone in ascending order, indicating hydrovolcanic eruption in a shallow lake. It is composed of seven sedimentary facies: massive tuff breccia (TBm), crudely stratified lapilli tuff (LTb), inverse-to-normally graded lapilli tuff (LTin), normally graded lapilli tuff (LTn), massive coarse tuff (CTm) and massive medium to fine tuff (MTm & FTm). It can be divided into five depositional units (unit Ⅰ to Ⅴ in ascending order) based on facies characteristics and componentry. Unit Ⅰ, about 4 m thick, consists of quartz-bearing massive tuffs (MTm & FTm), suggesting contact-surface steam explosivity within mouth-bar sand. Unit Ⅱ, about 1.5 m thick, consists of graded lapilli tuffs (LTin & LTn) with abundant accidental basalt clasts, suggesting bulk-interaction steam explosivity within the Lower Eoil Basalt and deposition from pyroclastic surges and ballistic fallouts of basalt clasts. Unit Ⅲ consists of tuff breccia (TBm; about 3.5 m thick) and overlying stratified lapilli tuff (LTb; about 0.5 m thick), which are interpreted to have resulted from debris flows and Surtseyan fallouts associated with vent-widening explosions. Unit Ⅳ, 0.8 m in thickness and composed of massive coarse tuff (CTm), suggests remobilization of pyroclasts by debris flows during volcanic quiescence. Crudely stratified lapilli tuff (LTb) of Unit Ⅴ, about 15 m thick, is interpreted to have formed by sustained Surtseyan finger jets without further excavation of the substrate. The vertical lithofacies changes suggest that the Jeonchon tuff cone experienced a series of eruptive and depositional processes during the growth because of the changes in depositional environments, types of the substrate (sand vs. lava), and vent geometry.
The Miocene Eoil Basin, SE Korea, contains abundant volcanic and volcaniclastic deposits because of active volcanism during basin formation. The Jeonchon tuff cone refers to an about 25 m-thick sequence of basaltic lapilli tuff in the central part of the basin. The tuff cone is underlain by pahoehoe lavas (the Lower Eoil Basalt), lacustrine mudstone, and mouth-bar sandstone in ascending order, indicating hydrovolcanic eruption in a shallow lake. It is composed of seven sedimentary facies: massive tuff breccia (TBm), crudely stratified lapilli tuff (LTb), inverse-to-normally graded lapilli tuff (LTin), normally graded lapilli tuff (LTn), massive coarse tuff (CTm) and massive medium to fine tuff (MTm & FTm). It can be divided into five depositional units (unit Ⅰ to Ⅴ in ascending order) based on facies characteristics and componentry. Unit Ⅰ, about 4 m thick, consists of quartz-bearing massive tuffs (MTm & FTm), suggesting contact-surface steam explosivity within mouth-bar sand. Unit Ⅱ, about 1.5 m thick, consists of graded lapilli tuffs (LTin & LTn) with abundant accidental basalt clasts, suggesting bulk-interaction steam explosivity within the Lower Eoil Basalt and deposition from pyroclastic surges and ballistic fallouts of basalt clasts. Unit Ⅲ consists of tuff breccia (TBm; about 3.5 m thick) and overlying stratified lapilli tuff (LTb; about 0.5 m thick), which are interpreted to have resulted from debris flows and Surtseyan fallouts associated with vent-widening explosions. Unit Ⅳ, 0.8 m in thickness and composed of massive coarse tuff (CTm), suggests remobilization of pyroclasts by debris flows during volcanic quiescence. Crudely stratified lapilli tuff (LTb) of Unit Ⅴ, about 15 m thick, is interpreted to have formed by sustained Surtseyan finger jets without further excavation of the substrate. The vertical lithofacies changes suggest that the Jeonchon tuff cone experienced a series of eruptive and depositional processes during the growth because of the changes in depositional environments, types of the substrate (sand vs. lava), and vent geometry.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.