다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Chemical engineering and processing = Génie des procédés = Verfahrenstechnik, v.83, 2014년, pp.1 - 11
Taler, D. , Oclon, P.
AI-Helper
Plate fin-and-tube heat exchangers operate in a cross-flow arrangement with the complex path of gas flow, hence in order to determine the velocity field and heat transfer characteristics, the numerical methods must be used. The CFD codes allow obtaining local values of the heat transfer coefficient,...
Int. J. Heat Mass Transfer Matos 47 6-7 1347 2004 10.1016/j.ijheatmasstransfer.2003.08.015 Optimally staggered finned circular and elliptic tubes in forced convection
Heat Transfer Eng. Jang 19 4 55 1998 10.1080/01457639808939936 Experimental and numerical analysis of the thermal-hydraulic characteristics of elliptic finned-tube heat exchangers
Appl. Therm. Eng. Li 26 17-18 2336 2006 10.1016/j.applthermaleng.2006.03.001 Experimental study on friction factor and numerical simulation on flow and heat transfer in an alternating elliptical axis tube
JSME Int. J. Ser. II Nishiyama 31 410 1988 Heat transfer and flow around an elliptic cylinders in tandem arrangement
Int. J. Heat Fluid Flow Khan 25 4 636 2004 10.1016/j.ijheatfluidflow.2004.01.002 An experimental characterization of cross-flow cooling of air via an in-line elliptical tube array
J. Heat Transfer Saboya 96 3 265 1974 10.1115/1.3450189 Local and average transfer coefficients for one-row plate fin and tube heat exchanger configurations
Saboya 153 1981 Proceedings of the VI Brazilian Congress of Mechanical Engineering Transfer coefficients for plate fin and elliptical tube heat exchangers
J. Braz. Soc. Mech. Sci. Bordallo 21 4 600 1999 10.1590/S0100-73861999000400004 Pressure drop coefficients for elliptic and circular sections in one, two and three-row arrangements of plate fin and tube heat exchangers
J. Heat Transfer Trans. ASME Idem 112 1 64 1990 10.1115/1.2910366 Heat transfer characterization of a finned-tube heat exchanger (with and without condensation)
HVAC&R Res. Hong 2 1 27 1996 10.1080/10789669.1996.10391331 Calculation of fin efficiency for wet and dry fins
Taler 2002 83-915470-1-9 Theoretical and Experimental Analysis of Heat Exchangers with Extended Surfaces
HVAC&R Res. Zilio 13 3 457 2007 10.1080/10789669.2007.10390965 An assessment of heat transfer through fins in a fin-and-tube gas cooler for transcritical carbon dioxide cycles
Heat Mass Transfer Taler 40 809 2004 10.1007/s00231-003-0466-4 Determination of heat transfer correlations for plate-fin-and-tube heat exchangers
Arch. Thermodyn. Taler 28 2 3 2007 Experimental and numerical predictions of the heat transfer correlations in the cross-flow plate fin and tube heat exchangers
Taler 362 2007 Proceedings of Seventh International Conference on Heat Exchanger Fouling and Cleaning-Challenges and Opportunities Effect of thermal contact resistance on the heat transfer in plate finned tube heat exchangers, ECI Symposium Series, Volume RP5
Taler 2009 Dynamics of Tube Heat Exchangers (in Polish)
Heat Mass Transfer Taler 49 1125 2013 10.1007/s00231-013-1148-5 Experimental determination of correlations for average heat transfer coefficients in heat exchangers on both fluid sides
Chem. Process Eng. Taler 31 4 839 2010 A new method for determination of thermal contact resistance of a fin-to-tube attachment in plate fin-and-tube heat exchangers
Taler 1 2012 Advances in Engineering Research, 1 Theoretical and experimental study of flow and heat transfer in a tube bank
Progr. Comput. Fluid Dyn. He 8 7/8 510 2008 10.1504/PCFD.2008.021329 Numerical study on the performance of wavy fin heat exchangers with different elliptic tube patterns
HVAC&R Res. Wu 14 1 85 2008 10.1080/10789669.2008.10390995 An extension of a steady-state model for fin-and-tube heat exchangers to include those using capillary tubes for flow control
Chem. Eng. Process.: Process Int. Liu 74 142 2013 10.1016/j.cep.2013.09.003 Flow and heat transfer characteristics of finned tube with internal and external fins in air cooler for waste heat recovery of gas-fired boiler system
Arch. Thermodyn. Łopata 31 3 37 2010 10.2478/v10173-010-0013-x Investigation of the flow conditions in a high-performance heat exchanger
Rynek Energii Łopata 102 5 112 2012 Analysis of operating conditions for high performance heat exchanger with the finned elliptical tube
Łopata 327 2012 Fluid Dynamics, Computational Modeling and Applications Modelling and optimizing operating conditions of heat exchanger with finned elliptical tubes
ANSYS CFX 2009 Solver Theory Guide. Release 12
Incopera 2006 Introduction to Heat Transfer
Hewitt 1994 Process Heat Transfer
Kays 1984 978-1575240602 Compact Heat Exchangers
Kraus 2001 978-0-471-39550-8 Extended Surface Heat Transfer
Taler 2006 10.1007/978-3-540-33471-2 978-3-540-33470-5 Solving Direct and Inverse Heat Conduction Problems
Mills 1999 978-0139476242 Heat Transfer
Chung 2010 Computational Fluid Dynamics
Menter 1993 AIAA Paper 93-2906, Reston Zonal two equation k-ω turbulence models for aerodynamic flows
Langtry 2005 AIAA Paper Transition modeling for general CFD applications in aeronautics
Seber 1989 10.1002/0471725315 978-0471617600 Nonlinear Regression
Table Curve 2005 Automated Curve Fitting Software
Forsch. Ingenieurwes. Gnielinski 41 1 8 1975 10.1007/BF02559682 Neue Gleichungen fur den Warme-und den Stoffubergang in turbulent durchstromten Rohren und Kanalen
High Temp. Inst. Pap. Pietukhov 1 1 69 1963 Theoretical calculations of heat transfer in turbulent flow in tubes of an incompressible fluid with variable physical properties
Bejan 2003 Heat Transfer Handbook Forced convection: internal flows
MATLAB 2013 MATLAB Online Documentation
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.