다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
International communications in heat and mass transfer, v.59, 2014년, pp.158 - 165
Promvonge, P. , Suwannapan, S. , Pimsarn, M. , Thianpong, C.
AI-Helper
The article presents an experimental investigation on thermal performance enhancement in a constant heat-fluxed square duct fitted with combined twisted-tape and winglet vortex generators. The experiments are carried out for the airflow rate through the tested square duct fitted with both the vortex...
Int. Commun. Heat Mass Transfer Promvonge 39 617 2012 10.1016/j.icheatmasstransfer.2012.03.007 Heat transfer in square duct fitted diagonally with angle-finned tape-part 1: experimental study
Int. Commun. Heat Mass Transfer Promvonge 39 625 2012 10.1016/j.icheatmasstransfer.2012.03.010 Heat transfer in square duct fitted diagonally with angle-finned tape-part 2: numerical study
Chin. J. Chem. Eng. Eiamsa-ard 20 5 863 2012 10.1016/S1004-9541(12)60411-X Heat transfer behavior in a square duct with tandem wire coil element insert
Int. Commun. Heat Mass Transfer Promvonge 38 1392 2011 10.1016/j.icheatmasstransfer.2011.07.014 Numerical heat transfer study of turbulent square-duct flow through inline V-shaped discrete ribs
Int. Commun. Heat Mass Transfer Chompookham 37 163 2010 10.1016/j.icheatmasstransfer.2009.09.012 Heat transfer augmentation in a wedge-ribbed channel using winglet vortex generators
Appl. Therm. Eng. Sri Harsha 29 11-12 2444 2009 10.1016/j.applthermaleng.2008.12.015 Influence of rib height on the local heat transfer distribution and pressure drop in a square channel with 90° continuous and 60° V-broken ribs
Exp. Thermal Fluid Sci. Gupta 32 997 2008 10.1016/j.expthermflusci.2007.11.015 Local heat transfer distribution in a square channel with 90° continuous, 90° saw tooth profiled and 60° broken ribs
Int. J. Heat Mass Transf. Tanda 47 229 2004 10.1016/S0017-9310(03)00414-9 Heat transfer in rectangular channels with transverse and V-shaped broken ribs
Int. J. Heat Mass Transf. Chandra 46 481 2003 10.1016/S0017-9310(02)00297-1 Heat transfer and friction behaviors in rectangular channels with varying number of ribbed walls
Int. J. Heat Mass Transf. Murata 44 1127 2001 10.1016/S0017-9310(00)00180-0 Comparison between laminar and turbulent heat transfer in a stationary square duct with transverse or angled rib turbulators
ASME J. Turbomach. Han 114 872 1992 10.1115/1.2928042 Influence of surface heat flux ratio on heat transfer augmentation in square channels with parallel, crossed, and V-shaped angled ribs
J. Heat Transf. ASME DC Han 113 590 1991 10.1115/1.2910606 Augmented heat transfer in square channels with parallel, crossed and V-shaped angled ribs
Int. J. Heat Mass Transf. Lau 34 7 1605 1991 10.1016/0017-9310(91)90140-A Effects of V-shaped rib arrays on turbulent heat transfer and friction of fully developed flow in a square channel
Int. Commun. Heat Mass Transfer Nanan 52 106 2014 10.1016/j.icheatmasstransfer.2014.01.018 Investigation of heat transfer enhancement by perforated helical twisted-tapes
Chem. Eng. Process. Eiamsa-ard 60 42 2012 10.1016/j.cep.2012.06.001 Heat transfer augmentation by helically twisted tapes as swirl and turbulence promoters
Int. Commun. Heat Mass Transfer Thianpong 39 861 2012 10.1016/j.icheatmasstransfer.2012.04.004 Thermal performance evaluation of heat exchangers fitted with twisted-ring turbulators
Int. Commun. Heat Mass Transfer Eiamsa-ard 39 649 2012 10.1016/j.icheatmasstransfer.2012.03.021 Decaying swirl flow in round tubes with short-length twisted tapes
Chem. Eng. Process. Wongcharee 50 211 2011 10.1016/j.cep.2010.11.012 Heat transfer enhancement by twisted tapes with alternate-axes and triangular, rectangular and trapezoidal wings
Int. Commun. Heat Mass Transfer Eiamsa-ard 31 644 2010 10.1016/j.icheatmasstransfer.2010.02.004 Study on thermal and fluid flow characteristics in turbulent channel flows with multiple twisted tape vortex generators
Int. Commun. Heat Mass Transfer Eiamsa-ard 36 365 2009 10.1016/j.icheatmasstransfer.2009.01.006 Convective heat transfer in a circular tube with short-length twisted tape insert
Appl. Therm. Eng. Eiamsa-ard 30 310 2010 10.1016/j.applthermaleng.2009.09.006 Heat transfer enhancement in a tube using delta-winglet twisted tape inserts
Exp. Thermal Fluid Sci. Eiamsa-ard 34 711 2010 10.1016/j.expthermflusci.2009.12.013 Influences of peripherally-cut twisted tape insert on heat transfer and thermal performance characteristics in a laminar and turbulent tube flows
Chem. Eng. Process. Rahimi 48 762 2009 10.1016/j.cep.2008.09.007 Experimental and CFD studies on heat transfer and friction factor characteristics of a tube equipped with modified twisted tape inserts
Int. J. Therm. Sci. Chang 46 5 506 2007 10.1016/j.ijthermalsci.2006.07.009 Turbulent heat transfer and pressure drop in tube fitted with serrated twisted tape
Exp. Thermal Fluid Sci. Chang 32 2 489 2007 10.1016/j.expthermflusci.2007.06.002 Heat transfer and pressure drop in tube with broken twisted tape insert
Appl. Therm. Eng. Eiamsa-ard 30 1673 2010 10.1016/j.applthermaleng.2010.03.026 Thermal characteristics in round tube fitted with serrated twisted tape
Int. Commun. Heat Mass Transfer Promvonge 39 953 2012 10.1016/j.icheatmasstransfer.2012.05.015 Heat transfer augmentation in a helical-ribbed tube with double twisted tape inserts
Int. Commun. Heat Mass Transfer Eiamsa-ard 37 850 2010 10.1016/j.icheatmasstransfer.2010.05.012 Influence of combined non-uniform wire coil and twisted tape inserts on thermal performance characteristics
Int. Commun. Heat Mass Transfer Promvonge 34 849 2007 10.1016/j.icheatmasstransfer.2007.03.019 Heat transfer behaviors in a tube with combined conical-ring and twisted-tape insert
Int. J. Heat Mass Transf. Bharadwaj 52 1938 2009 10.1016/j.ijheatmasstransfer.2008.08.038 Heat transfer and pressure drop in a spirally grooved tube with twisted tape insert
Int. J. Heat Mass Transf. Ray 46 889 2003 10.1016/S0017-9310(02)00355-1 Friction and heat transfer characteristics of flow through square duct with twisted tape insert
ANSI/ASME 1986 Measurement Uncertainty, PTC 19. 1-1985, Part I, USA
Int. J. Heat Mass Transf. Webb 24 715 1981 10.1016/0017-9310(81)90015-6 Performance evaluation criteria for use of enhanced heat transfer surfaces in heat exchanger design
Incropera 2006 Fundamental of Heat and Mass Transfer
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.