최소 단어 이상 선택하여야 합니다.
최대 10 단어까지만 선택 가능합니다.
다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기Materials & design, v.67, 2015년, pp.369 - 378
Hoseinlaghab, Sadegh (School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran) , Mirjavadi, Seyed Sajad (School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran) , Sadeghian, Nasser (School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran) , Jalili, Iraj (Department of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran) , Azarbarmas, M. (Faculty of Mechanical Engineering, K.N. Toosi University of Technology, Tehran, Iran) , Besharati Givi, Mohammad Kazem (School of Mechanical Engineering, College of Engineering, University of Tehran, Tehran, Iran)
Abstract This work aims to investigate the effects of main friction stir welding (FSW) parameters on the quality and creep properties of polyethylene plate joints. Welding variables for analysis were rotational speed, traverse speed, geometry and tilt angle of tool. Indentation creep tests were car...
Mater Des Bozkurt 35 440 2012 10.1016/j.matdes.2011.09.008 The optimization of friction stir welding process parameters to achieve maximum tensile strength in polyethylene sheets
Polymer Rojas 49 13 2985 2008 10.1016/j.polymer.2008.03.029 Precision polyolefin structure: modeling polyethylene containing alkyl branches
Mater Sci Eng: R: Reports Mishra 50 1 1 2005 10.1016/j.mser.2005.07.001 Friction stir welding and processing
10.1016/j.rimni.2013.04.007 Pereyra S, Lombera GA, Urquiza SA. Modelado numerico del proceso de soldadura FSW incorporando una tecnica de estimacion de parametros, Revista Internacional de Metodos Numericos para Calculo y Diseno en Ingenieria, 2013.
Mater Sci Eng, A Cabibbo 590 209 2014 10.1016/j.msea.2013.10.031 Double side friction stir welding of AA6082 sheets: Microstructure and nanoindentation characterization
J Mater Process Technol D’Urso 214 10 2075 2014 10.1016/j.jmatprotec.2014.01.013 Fatigue crack growth in the welding nugget of FSW joints of a 6060 aluminum alloy
Mater Des Panneerselvam 53 302 2014 10.1016/j.matdes.2013.07.017 Joining of Nylon 6 plate by friction stir welding process using threaded pin profile
Prog Mater Sci Nandan 53 6 980 2008 10.1016/j.pmatsci.2008.05.001 Recent advances in friction-stir welding-process, weldment structure and properties
Scripta Mater Rhodes 36 1 69 1997 10.1016/S1359-6462(96)00344-2 Effects of friction stir welding on microstructure of 7075 aluminum
Scripta Mater Liu 37 3 355 1997 10.1016/S1359-6462(97)00093-6 Microstructural aspects of the friction-stir welding of 6061-T6 aluminum
Procedia Eng Casalino 69 1541 2014 10.1016/j.proeng.2014.03.153 Influence of shoulder geometry and coating of the tool on the friction stir welding of aluminium alloy plates
Mater Des Simoes 59 344 2014 10.1016/j.matdes.2013.12.038 Material flow and thermo-mechanical conditions during Friction Stir Welding of polymers: literature review, experimental results and empirical analysis
Mater Des Mendes 58 457 2014 10.1016/j.matdes.2014.02.036 Effect of friction stir welding parameters on morphology and strength of acrylonitrile butadiene styrene plate welds
J Reinf Plast Compos Arici 27 18 2001 2008 10.1177/0731684408089134 Friction stir spot welding of polypropylene
Mater Des Bilici 33 145 2012 10.1016/j.matdes.2011.06.059 Influence of tool geometry and process parameters on macrostructure and static strength in friction stir spot welded polyethylene sheets
Mater Des Bilici 33 545 2012 10.1016/j.matdes.2011.04.062 Effects of welding parameters on friction stir spot welding of high density polyethylene sheets
Comput Mater Sci Drozdov 39 4 729 2007 10.1016/j.commatsci.2006.09.001 Viscoelasticity and viscoplasticity of semicrystalline polymers: Structure-property relations for high-density polyethylene
Mater Sci Eng, A Chand 527 21 5873 2010 10.1016/j.msea.2010.06.022 Correlation of mechanical and tribological properties of organosilane modified cenosphere filled high density polyethylene
J Mater Res Technol Gadakh 2 4 370 2013 10.1016/j.jmrt.2013.10.003 Heat generation model for taper cylindrical pin profile in FSW
10.1007/BF03263445 Pepe N, Vilaca P, Quintino L. Metallurgical and Corrosion Features of Friction Stir Welding of AA5083-H111, IIW Doc. IX-2148-05, Annual Assembly of the International Institute of Welding (IIW), Commission IX, Prague, 2005.
J Mater Sci Lett Roumina 22 20 1435 2003 10.1023/A:1025767631738 Indentation creep of antimonial lead alloys
J Mater Sci Lett Juhasz 5 1 35 1986 10.1007/BF01671427 Superplastic indentation creep of lead-tin eutectic
J Mater Sci Geranmayeh 40 13 3361 2005 10.1007/s10853-005-0421-5 Power law indentation creep of Sn-5% Sb solder alloy
Mater Sci Technol Ashby 8 7 594 1992 10.1179/mst.1992.8.7.594 Indentation creep
Inst Met J Atkins 94 1 369 1966 Indentation hardness and the creep of solids
J Mater Sci De La Torre 26 16 4351 1991 10.1007/BF00543650 Indentation creep of lead and lead-copper alloys
J Mater Eng Perform Wang 23 9 3159 2014 10.1007/s11665-014-1092-7 An evaluation of creep behaviour in friction stir welded MA754 alloy
J Strain Anal Eng Des Deepak 44 2 127 2009 10.1243/03093247JSA466 Impact of stress exponent on steady state creep in a rotating composite disc
Mater Des Mendes 64 81 2014 10.1016/j.matdes.2014.07.047 Morphology and strength of acrylonitrile butadiene styrene welds performed by robotic friction stir welding
Int J Mach Tools Manuf Abbasi Gharacheh 46 15 1983 2006 10.1016/j.ijmachtools.2006.01.007 The influence of the ratio of ‘rotational speed/traverse speed’(ω/ v) on mechanical properties of AZ31 friction stir welds
Zettler 245 2010 Friction Stir Welding Effects and defects of friction stir welds
Mater Sci Eng, A Chen 433 1-2 64 2006 10.1016/j.msea.2006.06.056 The investigation of typical welding defects for 5456 aluminum alloy friction stir welds
Prog Mater Sci He 65 1 2014 10.1016/j.pmatsci.2014.03.003 A review of numerical analysis of friction stir welding
Mater Sci Eng, A Buffa 419 1 381 2006 10.1016/j.msea.2005.09.041 Design of the friction stir welding tool using the continuum based FEM model
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.