참고문헌 (38)

1. ivkovi, M., Tani, M., Kondi, S., Nikoli, V., Murgul, V., Vatin, N. The Sustainable Strategy of Obsolete Building Conversion to Residential Uses (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 1199-1205. 

2. etkovi, J., Kneevi, M., arkovi, M., Murgul, V., Vatin, N. Development and competitiveness improvement of the construction sector in Montenegro (2014) Applied Mechanics and Materials, Vol. 638-640, pp. 2465-2470. 

3. Jocovic, M., Melovic, B., Vatin, N., Murgul, V. Modern business strategy Customer Relationship Management in the area of civil engineering (2014) Applied Mechanics and Materials, Vol. 678, pp. 644-647. 

4. Melovic, B., Jocovic, M., Lugovskaya, I., Vatin, N. Possibilities of Implementing Customer Relationship Management in the Function of Improving the Competitiveness of the Civil Engineering Sector (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 977-983. 

5. Usmanov, R., Rakocevic, M., Murgul, V., Vatin, N. Problems of sub-mountain area development associated with collapsing loess soils (case of Tajikistan) (2014) Applied Mechanics and Materials, Vol. 633-634, pp. 927-931. 

6. Mrdak, I., Rakoevi, M., ugi, L., Usmanov, R., Murgul, V., Vatin, N. Analysis of the influence of dynamic properties of structures on seismic response according to Montenegrin and European regulations (2014) Applied Mechanics and Materials, Vol. 633-634, pp. 1069-1076. 

7. Radovanovi, ., SinđiGrebovi, R., Dimovska, S., Serdar, N., Vatin, N, Murgul, V. Testing of the Mechanical Properties of Masonry Walls - Determination of Compressive Strength (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 410-418. 

8. ？e？lija, M.,Radovi, N.,Vatin,N. Construction of Road Embankment with Waste Materials (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 596-601. 

9. Savi, A., Vatin, N., Murgul, V. Complex Testing and Rehabilitation Measures of the Bridges (Example of Road Bridge Across the South Morava, Serbia (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 896-902. 

10. Kamnik, R., Kovai, B., ？trukelj, A., Vatin, N., Murgul, V. Preparation, Installation and Signal Processing of Strain Gauges in Bridge Load Testing (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 903-912. 

11. Zejak, D., Vatin, N., Murgul, V. Analysis of the Masonry Structure Calculation with Vertical Ring Beams According to European Standards (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 111-117. 

12. Popovi, Z., Lazerevi, L., Vatin, N. Analysis of Track Gauge Widening in Curves with Small Radius (2015) Applied Mechanics and Materials, Vols. 725-726, pp. 967-973. 

13. 10.1016/S0043-1648(02)00081-9 Grassie, S., Nilsson, P., Bjurstrom, K., Frick, A., Hansson, L.G. Alleviation of rolling contact fatigue on Sweden's heavy haul railway (2002) Wear, Vol. 253, pp. 42-53. 

    상세보기

14. Heyder, R., Girsch, G. Testing of HSH rails in high-speed tracks to minimise rail damage (2005) Wear, Vol. 258, pp. 1014-1021. 

15. 10.1016/0043-1648(95)06650-0 Cannon, D.F., Pradier, H. Rail rolling contact fatigue Research by the European Rail Research Institute (1996) Wear, Vol. 191, pp. 1-13. 

    상세보기

16. Popovi, Z., Puzavac, L., Lazarevi, L. Rail Defects due to Rolling Contact Fatigue (2011) Building Materials and Structures, Vol. 54(2), pp. 17-29. 

17. Popovi, Z., Brajovi,Lj., Lazarevi, L., Milosavljevi L. Rail defects head checking on the Serbian Railways (2014) Technical Gazette, Vol. 21(1), pp. 147-153. 

18. Popovi, Z., Radovi, V. Analysis of cracking on running surface of rails (2013) Građevinar, Vol. 65(3), pp. 251-259. 

19. International Union of Railways. UIC Code 712 Rail Defects (2002), UIC, Paris, pp.111. 

20. Stock, R., Pippan, R. RCF and wear in theory and practice - The influence of rail grade on wear and RCF (2011) Wear, Vol. 271, pp. 125-133. 

21. Vitez, I., Oru, M., Krumes, D., Kladari, I. Damage to Railway Rails Caused by Exploitation (2007) Metallurgy, Vol. 46(2), pp. 123-128. 

22. 10.1016/j.engfracmech.2004.04.011 Donzella, G., Faccoli, M., Ghidini, A., Mazzu, A., Roberti, R. The competitive role of wear and RCF in a rail steel (2005) Engineering Fracture Mechanics, Vol. 72, pp. 287-308. 

    상세보기

23. International Union of Railways. Joint research project on Rail Defect Management - Analytical Modelling of Rail Defects and its Applications to Rail Defect Management (2003), U.S. Department of Transportation, Research, Massachusetts, pp. 31. 

24. International Union of Railways. UIC Code 725 Treatment of rail defects (2007), Paris, pp. 32. 

25. Dollevoet, R.P.B.J. Design of an Anti Head checking profile based on stress relief (2010), PhD Thesis, University of Twente, pp. 151. 

26. Schoch, W. Assuring Longevity of Rails by Keeping them in Specific Shape (2010), AusRAIL Conference, 23-24 November 2010, Perth, p. 8. 

27. Office of Rail Regulation, Train Derailment at Hatfield: A Final Report by Independent Investigation Board (2006), London, p. 245. 

28. Popovi, Z., Lazarevi, L.,Brajovi, LJ., Puzavac, L. Rail Defect Head Checking - Phenomenon and Treatment (2012), 20th International Symposium EURO-ZEL, 5-6 June 2012, ilina, Slovakia, pp. 202-209. 

29. Popovic, Z., Lazarevi, L. The research project No. 36012, Research of technical-technological, staff and organisational capacity of Serbian Railways, from the viewpoint of current and future European Union requirements, Ministry of Education and Science of the Republic of Serbia, Belgrade, 2014. 

30. Krull, R., Hintze, H., Thomas, H. Modern methods of non-destructive testing of materials in the superstructure (2000), International Symposium rail defects, California, pp. 39-54. 

31. Dey, A., Casperson, R., Pohl, R., Thomas, HM: The classification of surface defects in rails with eddy current testing, DGZIP Annual Conference, Munster, 2009. 

32. Popovi, Z., Lazarevi, L., Brajovi, Lj.,Gladovi, P. Managing rail service life (2014) Metallurgy,Vol. 53(4), pp. 721-724. 

33. Usanova, K., Rechinsky, A., Vatin, N. Academy of construction for university applicants as a tool of university online marketing (2014) Applied Mechanics and Materials, Vol. 635-637, pp. 2090-2094. 

34. Vatin, N., Gamayunova, O., Petrosova, D. Relevance of education in construction safety area(2014) Applied Mechanics and Materials, Vol. 635-637, pp. 2085-2089. 

35. Arseniev, D.G., Rechinskiy, A.V., Shvetsov, K.V., Vatin, N.I., Gamayunova, O.S. Activities of Civil Engineering Institute to attract foreign students for training in civil engineering programs (2014) Applied Mechanics and Materials, Vol. 635-637, pp. 2076-2080. 

36. Gamayunova, O., Vatin, N., Rechinskiy, A., Razinkina, E. Distance Learning System Moodle for Training of Specialists in the Field of Civil Engineering (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 1611-1616. 

37. Tuchkevich, E., Rechinsky, A., Vatin, N., Zolotova, J., Tuchkevich, V. The Benefits of Authorized Training Center Autodesk for Higher Education Institutions (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 1626-1633. 

38. Zolotova, J., Vatin, N., Tuchkevich, E., Rechinsky, A., Autodesk Revit - Key to Successful Training of Highly Qualified Civil Engineers (2015) Applied Mechanics and Materials, Vol. 725-726, pp. 1617-1625.