[논문]Thermal Fatigue Behavior of Air-Plasma Sprayed Thermal Barrier Coating with Bond Coat Species in Cyclic Thermal Exposure

Lu, Zhe; Myoung, Sang-Won; Jung, Yeon-Gil; Balakrishnan, Govindasamy; Lee, Jeongseung; Paik, Ungyu

doi:10.3390/ma6083387

Thermal Fatigue Behavior of Air-Plasma Sprayed Thermal Barrier Coating with Bond Coat Species in Cyclic Thermal Exposure 원문보기

Materials, v.6 no.8, 2013년, pp.3387 - 3403

Lu, Zhe (School of Nano & Advanced Materials Engineering, Changwon National University, Changwon, Gyeongnam 641-773, Korea) , Myoung, Sang-Won (E-Mails: lz19870522@126.com (Z.L.)) , Jung, Yeon-Gil (msw1980@changwon.ac.kr (S.-W.M.)) , Balakrishnan, Govindasamy (School of Nano & Advanced Materials Engineering, Changwon National University, Changwon, Gyeongnam 641-773, Korea) , Lee, Jeongseung (E-Mails: lz19870522@126.com (Z.L.)) , Paik, Ungyu (msw1980@changwon.ac.kr (S.-W.M.))

Abstract ▼ AI-Helper

The effects of the bond coat species on the delamination or fracture behavior in thermal barrier coatings (TBCs) was investigated using the yclic thermal fatigue and thermal-shock tests. The interface microstructures of each TBC showed a good condition without cracking or delamination after flame thermal fatigue (FTF) for 1429 cycles. The TBC with the bond coat prepared by the air-plasma spray (APS) method showed a good condition at the interface between the top and bond coats after cyclic furnace thermal fatigue (CFTF) for 1429 cycles, whereas the TBCs with the bond coats prepared by the high-velocity oxygen fuel (HVOF) and low-pressure plasma spray (LPPS) methods showed a partial cracking (and/or delamination) and a delamination after 780 cycles, respectively. The TBCs with the bond coats prepared by the APS, HVOF and LPPS methods were fully delaminated (>50%) after 159, 36, and 46 cycles, respectively, during the thermal-shock tests. The TGO thickness in the TBCs was strongly dependent on the both exposure time and temperature difference tested. The hardness values were found to be increased only after the CFTF, and the TBC with the bond coat prepared by the APS showed the highest adhesive strength before and after the FTF.

주제어

참고문헌 (30)

1. Itoh Y. Saitoh M. Tamura M. Characteristics of MCrAlY Coatings Sprayed by High Velocity Oxygen-Fuel Spraying System J. Eng. Gas Turbine Power 2000 122 43 49 10.1115/1.483173

상세보기
2. Wu Y.N. Zhang G. Feng Z.C. Zhang B.C. Liang Y. Liu F.J. Oxidation behavior of laser remelted plasma sprayed NiCrAlY and NiCrAlY–Al 2 O 3 coatings Surf. Coat. Technol. 2001 136 56 60 10.1016/S0257-8972(00)01102-6

상세보기
3. Padture N.P. Schlichting K.W. Bhatia T. Ozturk A. Cetegen B. Jordan E.H. Gell M. Jiang S. Xiao T.D. Strutt P.R. Towards durable thermal barrier coatings with novel microstructures deposited by solution-precursor plasma spray Acta Mater. 2001 49 2251 2257 10.1016/S1359-6454(01)00130-6

상세보기
4. Jadhav A.D. Padture N.P. Jordan E.H. Gell M. Miranzo P. Fuller E.F. Jr. Low-thermal-conductivity plasma-sprayed thermal barrier coatings with engineered microstructures Acta Mater. 2006 54 3343 3349 10.1016/j.actamat.2006.03.024

상세보기
5. Clarke D.R. Levi C.G. Materials design for the next generation thermal barrier coatings Ann. Rev. Mater. Res. 2003 33 383 417 10.1146/annurev.matsci.33.011403.113718

상세보기
6. Padture N.P. Gell M. Jordan E.H. Thermal Barrier Coatings for Gas-Turbine Engine Applications Science 2002 296 280 284 10.1126/science.1068609 11951028

상세보기
7. Clarke D.R. Phillport S.R. Thermal barrier coating materials Mater. Today 2005 8 22 29 10.1016/S1369-7021(05)70934-2

상세보기
8. Haynes J.A. Ferber M.K. Porter W.D. Rigney E.D. Mechanical properties and fracture behavior of interfacial alumina scales on plasma-sprayed thermal barrier coatings Mater. High Temp. 1999 16 49 69 10.1179/mht.1999.006

상세보기
9. Simms N.J. Kilgallon P.J. Roach C. Oakey J.E. Renusch D. Echsler H. Schütze M. Development of oxides at TBC-bond coat interfaces in burner rig exposures Mater. High Temp. 2003 20 519 526

상세보기
10. Peichl A. Beck T. Vöhringer O. Behaviour of an EB-PVD thermal barrier coating system under thermal–mechanical fatigue loading Surf. Coat. Technol. 2003 162 113 118 10.1016/S0257-8972(02)00698-9

상세보기
11. Stokes J. Looney L. Residual stress in HVOF thermally sprayed thick deposits Surf. Coat. Technol. 2004 177–178 18 23 10.1016/j.surfcoat.2003.06.003

상세보기
12. Bull S.J. Davidson R.I. Fisher E.H. McCaber A.R. Jones A.M. A simulation test for the selection of coatings and surface treatments for plastics injection moulding machines Surf. Coat. Technol. 2000 130 257 265 10.1016/S0257-8972(00)00697-6

상세보기
13. Pant B.K. Arya V. Mann B.S. Development of Low-Oxide MCrAlY Coatings for Gas Turbine Applications J. Therm. Spray Technol. 2007 16 275 280 10.1007/s11666-006-9002-7

상세보기
14. Schlichting K.W. Padture N.P. Jordan E.H. Gell M. Failure modes in plasma-sprayed thermal barrier coatings J. Therm. Spray Technol. 2003 342 120 130
15. Rabiei A. Evans A.G. Failure mechanisms associated with the thermally grown oxide in plasma-sprayed thermal barrier coatings Acta Mater. 2000 48 3963 3976 10.1016/S1359-6454(00)00171-3

상세보기
16. Feuerstein A. Knapp J. Taylor T. Ashary A. Bolcavage A. Hitchman N. Technical and Economical Aspects of Current Thermal Barrier Coating Systems for Gas Turbine Engines by Thermal Spray and EBPVD J. Therm. Spray Technol. 2008 17 199 213 10.1007/s11666-007-9148-y

상세보기
17. Ingo G.M. Caro T. Chemical aspects of plasma spraying of zirconia-based thermal barrier coatings Acta Mater. 2008 56 5177 5187 10.1016/j.actamat.2008.07.006

상세보기
18. Tsantrizes P.G. Kim G.E. Brezinski T.A. TBCs on free-standing multilayer components Proceedings of AGARD SMP Meeting on Thermal Barrier Coatings Aalborg, Denmark 15–16 October 1997 71 78
19. Knight R. Zhangxiong D. Kim E.H. Smith R.H. Influence of bond coat surface characteristics on the performance of TBC systems Proceedings of the 15th International Thermal Spray Conference, ASM Thermal Spray Society Nice, France 28–29 May 1998 1549 1554
20. Chwa S.O. Ohmori A. Microstructures of ZrO 2–8 wt % Y2O 3 coatings prepared by a plasma laser hybrid spraying technique Surf. Coat. Technol. 2002 153 304 312 10.1016/S0257-8972(01)01686-3

상세보기
21. Ma X.Q. Takemoto M. Quantitative acoustic emission analysis of plasma sprayed thermal barrier coatings subjected to thermal shock tests Mater. Sci. Eng. A 2001 308 101 110 10.1016/S0921-5093(00)01985-7

상세보기
22. Lawn B.R. Fracture of Brittle Solids 2nd ed. Cambridge University Press Cambridge, UK 1993 250
23. ASTM Standards C633–79 Standard Test Method for Adhesion or Cohesive Strength of Thermal Spray Coatings American Society of Testing and Materials Philadelphia, PA, USA 1999
24. Traeger F. Ahrens M. Vaβen R. Stöver D. A life time model for ceramic thermal barrier coatings Mater Sci. Eng. A 2003 358 255 265 10.1016/S0921-5093(03)00300-9

상세보기
25. Rajasekaran B. Mauer G. Vaβen R. Enhanced Characteristics of HVOF-sprayed MCrAlY Bond Coats for TBC Applications J. Therm. Spray Technol. 2011 20 1209 1216 10.1007/s11666-011-9668-3

상세보기
26. Davis J.R. Handbook of Thermal Spray Technology 1st ed. ASM International Press Novelty, OH, USA 2004 48
27. Chang G.C. Pucharoen W. Finite element thermal stress solutions for thermal barrier coatings J. Therm. Spray Technol. 1987 32 307 325
28. Haynes J.A. Ferber M.K. Porter W.D. Thermal cycling behavior of plasma-sprayed thermal barrier coatings with various MCrAlX bond coats J. Therm. Spray Technol. 2010 9 38 48 10.1361/105996300770350041

상세보기
29. Lee P.H. Lee S.Y. Kwon J.Y. Myoung S.W. Lee J.H. Jung Y.G. Cho H. Paik U. Thermal cycling behavior and interfacial stability in thick thermal barrier coatings Surf. Coat. Tech. 2010 205 1250 1255 10.1016/j.surfcoat.2010.08.062

상세보기
30. Jang H.J. Park D.H. Jung Y.G. Jang J.C. Choi S.C. Paik U. Mechanical characterization and thermal behavior of HVOF-sprayed bond coat in thermal barrier coatings (TBCs) Surf. Coat. Technol. 2006 200 4355 4362 10.1016/j.surfcoat.2005.02.170

상세보기

LOADING...

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Thermal Fatigue Behavior of Air-Plasma Sprayed Thermal Barrier Coating with Bond Coat Species in Cyclic Thermal Exposure 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (30)

이 논문을 인용한 문헌

연구과제 타임라인

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트

연합인증

Thermal Fatigue Behavior of Air-Plasma Sprayed Thermal Barrier Coating with Bond Coat Species in Cyclic Thermal Exposure 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (30)

이 논문을 인용한 문헌

연구과제 타임라인

전체(0) 논문(0) 특허(0) 보고서(0)

전체(0) 논문(0) 특허(0) 보고서(0)

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트