다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Carbon, v.96, 2016년, pp.1043 - 1052
Anil Kumar, A. , Sundaram, R.
AI-Helper
Cure cycle optimization of resin transfer molding grade epoxy resin system was studied for the manufacture of composite structures by the resin infusion technique. Cure cycle optimization necessitates resin viscosity optimization for appropriate wetting of fiber preform and to minimize excess resin ...
Campbell 2010 Structural Composite Materials
Eckold 1994 Design and Manufacture of Composite Structures
Mc Iihagger 2014 Polymer Composites in the Aerospace Industry Manufacturing processes for composite materials and components for aerospace applications
Mazumdar 2002 Composites Manufacturing- Materials, Product and Process Engineering
Hale 2006 Boing 787 from the Ground Up, A quarterly publication of Boeing Aerospace
Hellard 2008 Composites in Airbus- a Long Story of Innovations and Experiences, Composites in Airbus @ Global Investor Forum
Campbell 2003 Manufacturing Process for Advanced Composites
Parnas 2000 Liquid Composite Molding
Rudd 1997 Liquid Molding Technologies
R. Sundaram, K.K. Verma, K. Singh, G.M. Kotresh, B.L. Dinesh. Process for manufacturing co-cured composite structures and products manufactured thereof. Indian Pat. filed on March 2010; File No.: 790/DEL/2010, Published on: May 2012.
2011 Advanced Fiber-Reinforced Matrix Products for Direct Processes
Arnold 395 2012 SAMPE Europe 33rd Intl. Conference and Forum, Session 7A, SEICO 12. (Paris. France) Improvement of the toughness of epoxy resin systems using thermoplastic binders
Botelho 2007 9th Brazilian Congress on Polymers, Campina Grande, (Paraiba. Brazil) Toughness enhancement of the RTM6 system employing engineering thermoplastics and block-copolymer
Njionhou 2010 The 10th International Conference on Flow Processes in Composite Materials (FPCM10), Monte Verita, (Ascona. Switzerland) Relationships between process parameters and mechanical properties of laminated plates made by L.R.I
Gill 2007 16th Intl. Conference on Composite Materials (ICCM-16), (Kyoto. Japan) Effect of RTM defects on mode I and II delamination behaviour of 5HS woven composites
Karkanas 1998 Cure Modelling and Monitoring of Epoxy/amine Resin Systems
J. Appl. Poly. Sci. Navabpour 99 6 3658 2006 10.1002/app.22869 Comparison of the curing kinetics of the RTM6 epoxy resin system using differential scanning calorimetry and a microwave-heated calorimeter
Polym. Eng. Sci. Magniez 346 2012 10.1002/pen.22088 Apparent volumetric shrinkage study of RTM6 resin during the curing process and its effect on the residual stresses in a composite
Compos. Sci. Tech. Aduriz 67 15-16 3196 2007 10.1016/j.compscitech.2007.04.008 Quantitative control of RTM6 epoxy resin polymerization by optical index determination
Balvers 2009 Intl. Conference on Composite Materials (ICCM-17), (Edinburgh. UK) Through-thickness cure monitoring of thick advanced composites using dielectric sensors
Meas. Sci. Technol. Skordos 11 25 2000 10.1088/0957-0233/11/1/304 A dielectric sensor for measuring flow in resin transfer molding
Compos. Part A Kiuna 33 11 1497 2002 10.1016/S1359-835X(02)00177-X A model for resin viscosity during cure in the resin transfer molding process
Mater. Sci. Eng. R Tjong 53 2006 10.1016/j.mser.2006.06.001 Structural and mechanical properties of polymer nanocomposites
Compos. Sci. Tech. Sumfleth 70 1 173 2010 10.1016/j.compscitech.2009.10.007 A comparative study of the electrical and mechanical properties of epoxy nanocomposites reinforced by CVD- and arc-grown multi-wall carbon nanotubes
Compos. Sci. Tech. Chou 70 1 2010 10.1016/j.compscitech.2009.10.004 An assessment of the science and technology of carbon nanotube-based fibers and composites
J. Compos. Sosa 2014 2014 Multifunctional thermally remendable nanocomposites
Compos. Sci. Tech. Ghose 66 13 1995 2006 10.1016/j.compscitech.2006.01.008 High temperature resin/carbon nanotube composite fabrication
Compos. Part A Mahrholz 40 3 235 2009 10.1016/j.compositesa.2008.11.008 Quantitation of the reinforcement effect of silica nanoparticles in epoxy resins used in liquid composite molding
Anil Kumar 2009 Proceedings of Indian SAMPE National Conference on Composites (INCCOM-8), (Thiruvananthapuram. India) Synthesis and characterization of epoxy-CNT nanocomposites for aerospace applications
J. Compos. Mater. Husaain 40 17 1511 2006 10.1177/0021998306067321 Review article: polymer-matrix nanocomposites, processing, manufacturing, and application: an overview
Curr. Nanosci. Allaoui 6 2 153 2010 10.2174/157341310790945669 Rheological and electrical transitions in carbon nanotube/epoxy suspensions
2015 HexFlow RTM6-2 Bi-component Epoxy System for Resin Transfer Molding and Infusion Technologies, Product Data Sheet
Procedia Eng. Montoro 10 3220 2011 10.1016/j.proeng.2011.04.532 Influence of voids on flexural resistance of the NCF/RTM6 composites
Tanaka 1987 Epoxy Resins: Chemistry and Technology Curing reactions
Mater. Sci. Eng. R Popov 43 61 2004 10.1016/j.mser.2003.10.001 Carbon nanotubes: properties and application
Ramachandra Vol. 19 2013
Carbon Fan 42 871 2004 10.1016/j.carbon.2004.01.067 Experimental investigation of dispersion during flow of multi-walled carbon nanotube/polymer suspension in fibrous porous media
Compos. Part A Sadeghian 37 1787 2006 10.1016/j.compositesa.2005.09.010 Multiscale fiber-reinforced composites prepared by vacuum-assisted resin transfer molding
Open J. Compos. Mater. Salam 3 1 2013 10.4236/ojcm.2013.32A001 Improvement in mechanical and thermo-mechanical properties of epoxy composite using two different functionalized multi-walled carbon nanotubes
Polym. J. Yang 41 9 752 2009 10.1295/polymj.PJ2009064 Fabrication, morphology and cure behaviour of triethylenetetramine-grafted multiwalled carbon nanotube/epoxy nanocomposites
Carbon Ma 1824 2010 10.1016/j.carbon.2010.01.028 Dispersion, interfacial interaction and re-agglomeration of functionalized carbon nanotubes in epoxy composites
Compos. Sci. Technol. Shen 67 3041 2007 10.1016/j.compscitech.2007.04.025 The reinforcement role of different amino-functionalized multi-walled carbon nanotubes in epoxy nanocomposites
The Sci. World J. (Hindawi Publ. Corp.) Reza Saeb 2013 Cure kinetics of epoxy nanocomposites affected by MWCNTs functionalization: a review
J. Polym. Sci. Part B Polym. Phys. Xie 42 3701 2004 10.1002/polb.20220 Cure kinetics of carbon nanotube/tetrafunctional epoxy nanocomposites by isothermal differential scanning calorimetry
Open J. Compos. Mater. Jahan 3 40 2013 10.4236/ojcm.2013.32A006 Effect of carboxyl functionalized MWCNTs on the cure behavior of epoxy resin
Compos. Part A Siddiqui 42 1412 2011 10.1016/j.compositesa.2011.06.005 Manufacturing and characterization of carbon fibre/epoxy composite prepregs containing carbon nanotubes
J. Appl. Polym. Sci. Sawi 126 1 358 2012 10.1002/app.36988 Investigation of the effect of double-walled carbon nanotubes on the curing reaction kinetics and shear flow of an epoxy resin
Iran Polym. J. Esmizadeh 24 1 2015 10.1007/s13726-014-0281-4 Effect of type and aspect ratio of different carbon nanotubes on cure behaviour of epoxy-based nanocomposites
Top. Curr. Chem. Hirsch 245 193 2005 10.1007/b98169 Functionalization of Carbon Nanotubes
J. Dispers. Sci. Technol. Kim 29 426 2008 10.1080/01932690701718818 Chemical surface treatment for highly improved dispersibility of multi-walled carbon nanotubes in water
J. Rheol. Rahatekar 50 5 599 2006 10.1122/1.2221699
J. Rheol. Fan 51 4 585 2007 10.1122/1.2736424 Rheology of multiwall carbon nanotube suspensions
Compos. Part A Siddiqui 42 1412 2011 10.1016/j.compositesa.2011.06.005 Manufacturing and characterization of carbon fibre/epoxy composite prepregs containing carbon nanotubes
Iran. Polym. J. Esmizadeh 24 1 2015 10.1007/s13726-014-0281-4 Effect of type and aspect ratio of different carbon nanotubes on cure behavior of epoxy-based nanocomposites
Carbon Song 43 1378 2005 10.1016/j.carbon.2005.01.007 Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites
Wang 2012 Properties of a Multi-walled Carbon Nanotube/epoxy Nanocomposite System
Kim 2009 International Conference on Composite Materials (ICCM- 17), (Edinburg. UK) Assessment of state of dispersion for epoxy/CNT nanocomposites
해당 논문의 주제분야에서 활용도가 높은 상위 5개 콘텐츠를 보여줍니다.
더보기 버튼을 클릭하시면 더 많은 관련자료를 살펴볼 수 있습니다.
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.