[논문]Train wheel diagnostics by laser ultrasonics

Cavuto, A.; Martarelli, M.; Pandarese, G.; Revel, G.M.; Tomasini, E.P.

doi:10.1016/j.measurement.2015.11.014

Train wheel diagnostics by laser ultrasonics 원문보기

Measurement : journal of the International Measurement Confederation, v.80, 2016년, pp.99 - 107

Cavuto, A. , Martarelli, M. , Pandarese, G. , Revel, G.M. , Tomasini, E.P.

Abstract ▼ AI-Helper

The integrity of the wheel is very important for the safety of railway. In this paper a laser-ultrasonic diagnostic measurement procedure has been designed for the inspection of the train wheels with the aid of a FE-model simulating the ultrasound propagation within the wheel itself. The laser-ultrasonic method exploits an air-coupled ultrasonic probe that detects the ultrasonic waves generated by a high-energy pulsed laser. As a result, the measurement chain is completely non-contact, from generation to detection, this making it possible to considerably speed up the testing set-up time and make it more flexible. This is an important advantage with respect to the conventional NDT technologies currently applied to train component diagnostics, as contact phase array methods. Laser ultrasonics is a complete remote technique since both the laser source and the receiving probe are installed in the proximity of the wheel directly on the bogie and therefore it is a more flexible technology with respect to standard techniques applied for wheel train diagnostics, as phased array. The applications of laser-ultrasonic technique available in the state-of-the-art work with high energy ultrasonic waves to guarantee good signal to noise ratio. Therefore, conventional laser-ultrasonic systems operates under ablative regime that assures high energy ultrasonic waves generation. On the other hand, the ablation produces damages on the surface of the component inspected. In this paper, it has been demonstrated that it is possible to work with lower energy waves, i.e. in the limit between ablative and thermo-elastic regime, if the experiment is properly designed on the basis of a numerical model. This operation regime allowed to guarantee a material removal below the threshold admitted in rail wheel application. The diagnostic procedure developed has been applied for the inspection of train wheels provided by the Italian railway company Trenitalia, on which dominant wheel failure cracks have been expressly created.

주제어

참고문헌 (33)

Measurement Milkovic 46 3308 2013 10.1016/j.measurement.2013.06.017 Wayside system for wheel-rail contact forces measurements

상세보기
Measurement Molatefi 46 2313 2013 10.1016/j.measurement.2013.04.008 Analysis of new method for vertical load measurement in the barycenter of the rail web by using FEM

상세보기
Railway applications - In-service wheelset operation requirements - In-service and off-vehicle wheelset maintenance, in EN 15313:2010.
L. Hajibabai, M.R. Saat, Y. Ouyan, C.P.L. Barka, Z. Yang, K. Bowlin, K. Soman, D. Lauro, X. Li, Wayside Defect detector data mining to predict potential WILD train stops, in: Proceedings of the AREMA 2012 Annual Conference & Exposition, Chicago.
J. Peng, L. Wang, The design and application of lateral phased array probe for railway wheel rim ultrasonic detection system, in: Proceedings of the 18th WCNDT, South Africa, 2012.
J. Peng, X. Gao, Y. Zhang, Z. Wang, C. Peng, Y. Tan, K. Yang, B. Zhao, An ultrasonic technology study for subsurface defect in railway wheel tread, in: Proceedings of 11th European Conference on Non-Destructive Testing (ECNDT), Prague, Czech Republic, 2014.
10.1109/FENDT.2013.6635540 J. Peng, H. Peng, Y. Zhang, X. Gao, C. Peng, Z. Wang, Study on the railway wheel ultrasonic inspection method using the full matrix capture, Far East Forum on Nondestructive Evaluation/Testing: New Technology & Application (FENDT), Jinan, China, 2013.
P.N. Marty, Latest development in the UT inspection of train wheels and axles, in: Proceedings of 18th World Conference on Nondestructive Testing, Durban, South Africa, 2012.
Insight Kenderian 48 6 336 2006 10.1784/insi.2006.48.6.336 Dynamic railroad inspection using the laser-air hybrid ultrasonic technique

상세보기
J. Sandwich Struct. Mater. Revel 15 1 1 2013 10.1177/1099636212456861 Advanced ultrasonic non destructive testing for damage detection on thick and curved composite elements for constructions

상세보기
P. Pietroni, G.M. Revel, Non contact ultrasonic techniques for composite material diagnostics in aeronautics applications, in: Proceeding of 9th European Conference on Non-Destructive Testing, Berlin, 2006.
J. Cultural Heritage Quagliarini 15 104 2014 10.1016/j.culher.2013.04.008 Historical plasters on light thin vaults: State of conservation assessment by a hybrid ultrasonic method

상세보기
Exp. Mech. Revel 47 5 637 2007 10.1007/s11340-006-9032-6 Measurement of the apparent density of green ceramic tiles by a non-contact ultrasonic method

상세보기
For. Prod. J. Fleming 2005 Noncontact ultrasound detection of exotic insects in wood packing materials
Ultrasonics Schindel 35 2 179 1997 10.1016/S0041-624X(96)00103-5 Air-coupled generation and detection of ultrasonic bulk waves in metals using micromachined capacitance transducers

상세보기
Ultrasonics Wright 37 19 1999 10.1016/S0041-624X(98)00034-1 Air-coupled ultrasonic testing of metals using broadband pulses in through-transmission

상세보기
D. Cerniglia, B.B. Djordjevic, V. Nigrelli, Quantitative subsurface defect detection in composite materials using a non-contact ultrasonic system, in: Proceedings of IEEE international Ultrasonics Symposium, Atlanta, 2001.
C. Cosenza, D. Cerniglia, B.B. Djordjevic, Non-contact ultrasonic inspection of skin/core bond in honeycomb with Lamb waves, in: Proceedings of IEEE Ultrasonics Symposium, Monaco, 2002.
Mater. Eval. Kenderian 60 1 65 2002 Laser-based and air-coupled ultrasound as noncontact and remote techniques for testing railroad tracks
D. Cerniglia, S. Kenderian, B.B. Djordjevic, G. Garcia, R. Morgan, Laser e trasduttore di accoppiamento in aria per l’ispezione ultrasonica non a contatto nel settore ferroviario, in: Proceedings of Conferenza AIPnD, Matera, Italy, 2002.
10.1115/RTD2005-70058 K. Gonzales, S. Kendarian, D. Carter, A Smith, R Morgan, Non-contact interrogation of railroad axles using laser-based ultrasonic inspection, in: Proceedings of JRC2005, Pueblo, Colorado. http://dx.doi.org/10.1109/RRCON.2005.186070.
10.1063/1.4879606 T. Mitter, H. Grün, J. Roither, A. Betz, S. Bozorgi B. Reitinge, P. Burgholzer, Detection and reconstruction of solidification cracks -laser ultrasonic measurements during the continuous casting process of aluminum, in: Proceedings of AIP Conference, 2014, http://dx.doi.org/10.1063/1.4879606.
Ultrasonics Cavuto 55 48 2015 10.1016/j.ultras.2014.08.010 Experimental investigation by laser ultrasonics for high speed train axle diagnostics

상세보기
AAR Manual of Standards and Recommended Practices Wheels and Axles M-107/M-208.
10.1063/1.4879608 M.S. Malik, A. Cavuto, M. Martarelli, G. Pandarese, G.M. Revel, Reliability analysis of laser ultrasonics for train axle diagnostics based on model assisted POD Curves, in: Proceedings of 11th AIVELA conference, Italy, 2014.
Opt. Lasers Eng. Castellini 32 6 565 2000 10.1016/S0143-8166(00)00003-8 Experimental and numerical investigation on structural effects of laser pulses for modal parameter measurement

상세보기
Measurement Castellini 35 163 2004 10.1016/j.measurement.2003.07.004 Measurement of vibrational modal parameters using laser pulse excitation techniques

상세보기
Opt. Laser Technol. Wanga 39 806 2007 10.1016/j.optlastec.2006.01.009 Numerical simulation of laser-generated ultrasound in non-metallic material by the finite element method

상세보기
A. Cavuto, F. Sopranzetti, M. Martarelli, G.M. Revel, Laser-ultrasonics wave generation and propagation FE model in metallic materials, in: Proceeding of COMSOL Conference, Rotterdam, 2013.
Appl. Phys. A Cerniglia 105 959 2011 10.1007/s00339-011-6520-z Influence of laser beam profile on the generation of ultrasonic waves

상세보기
J. Acoust. Soc. Am. Alleyne 89 3 1159 1991 10.1121/1.400530 A two-dimensional Fourier transform method for measurement of propagating multimode signals

상세보기
Scruby 1990 Laser Ultrasonics: Techniques and Applications
J. Mech. Eng. Solodov 56 9 557 2010 Air-coupled lamb and Rayleigh waves for remote NDE of defects and material elastic properties

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Train wheel diagnostics by laser ultrasonics 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (33)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트