참고문헌 (34)

1. Mater Sci Eng, A Srivatsan 314 118 2001 10.1016/S0921-5093(00)01912-2 Influence of temperature on cyclic stress response, strain resistance, and fracture behaviour of aluminum alloy 2524 

   상세보기

2. J Mater Sci Chen 48 3225 2013 10.1007/s10853-012-7102-y Twinning and orientation relationships of T-phase precipitates in an Al matrix 

   상세보기

3. Procedia Eng Maduro 10 1214 2011 10.1016/j.proeng.2011.04.202 Modeling the growth of LT and TL-oriented fatigue cracks in longitudinally and transversely pre-strained Al 2524-T3 alloy 

   상세보기

4. Int J Fatigue Golden 21 S211 1999 10.1016/S0142-1123(99)00073-0 A comparison of fatigue crack formation at holes in 2024-T3 and 2524-T3 aluminum alloy specimens 

   상세보기

5. Mech Mater Baptista 51 66 2012 10.1016/j.mechmat.2012.04.003 Describing fatigue crack growth and load ratio effects in Al 2524 T3 alloy with an enhanced exponential model 

   상세보기

6. Mater Des Srivatsana 23 129 2002 10.1016/S0261-3069(01)00070-X The cyclic fatigue and final fracture behaviour of aluminum alloy 2524 

   상세보기

7. Int J Fatigue Fonte 23 S311 2001 10.1016/S0142-1123(01)00179-7 The microstructure and environment influence on fatigue crack growth in 7049 aluminum alloy at different load ratios 

   상세보기

8. Suresh 1998 Fatigue of materials 

9. Phil Mag Chen 93 2269 2013 10.1080/14786435.2013.766371 Concurrent formation of two different type precipitation-free zones during the initial stage of homogenization 

   상세보기

10. J Electron Mater Agnew 28 1038 1999 10.1007/s11664-999-0181-0 Overview of fatigue performance of Cu processed by severe plastic deformation 

    상세보기

11. Mater Sci Eng, A Zhou 527 4070 2010 10.1016/j.msea.2010.03.011 Enhanced fatigue crack propagation resistance of an Al-Cu-Mg alloy by artificial aging under influence of electric field 

    상세보기

12. Mater Sci Eng, A Chen 580 150 2013 10.1016/j.msea.2013.05.053 Effects of inclusions, grain boundaries and grain orientations on the fatigue crack initiation and propagation behaviour of 2524-T3 Al alloy 

    상세보기

13. Mater Res Soc Symp Proc Mughrabi 634 2001 Cyclic deformation and fatigue properties of ultrafine grain size materials: current status and some criteria for improvement of the fatigue resistance 

14. Kim Y-W, Bidwell LR. Effects of microstructure and aging treatment on the fatigue crack growth behaviour of high strength P/M aluminum alloy X7091. In: High-strength powder metallurgy aluminum alloys: proceedings of a symposium sponsored by the Powder Metallurgy Committee of the Metallurgical Society of AIME, held at the 111th AIME Annual Meeting, Dallas, Texas, February 17-18, 1982/edited by Michael J. Koczak, Gregory J. Hildeman; p. 107-24. 

15. Acta Mater Chowdhury 61 2531 2013 10.1016/j.actamat.2013.01.030 Modeling fatigue crack growth resistance of nanocrystalline alloys 

    상세보기

16. Metall Trans A Suresh 16 249 1985 10.1007/BF02816051 Fatigue crack deflection and fracture surface contact: micromechanical models 

    상세보기

17. Scripta Mater Hanlon 49 675 2003 10.1016/S1359-6462(03)00393-2 Grain size effects on the fatigue response of nanocrystalline metals 

    상세보기

18. Prog Mater Sci Valiev 45 103 2000 10.1016/S0079-6425(99)00007-9 Bulk nanostructured materials from severe plastic deformation 

    상세보기

19. Int J Fatigue Plekhov 33 477 2011 10.1016/j.ijfatigue.2010.10.001 A dimensional analysis interpretation to grain size and loading frequency dependencies of the Paris and Wohler curves 

    상세보기

20. Mater Sci Forum Zhou 386-388 409 2003 Thermally stable nanocrystalline Al-Mg alloy powders produced by cryomilling 

21. Metall Mater Trans A Han 34 603 2003 10.1007/s11661-003-0095-z Mechanical properties of and ultrafine-grained Al-7.5%Mg alloy 

    상세보기

22. Wear Wang 237 176 2000 10.1016/S0043-1648(99)00323-3 Abrasive wear characteristics of plasma sprayed nanostructured alumina/titania coatings 

    상세보기

23. Int J Fatigue Kamp 29 897 2007 10.1016/j.ijfatigue.2006.08.004 Analytical modelling of the influence of local mixed mode displacements on roughness induced crack closure 

    상세보기

24. Metall Mater Trans A Sehitoglu 28 2277 1997 10.1007/s11661-997-0185-4 Contact of crack surfaces during fatigue: part 2. Simulations 

    상세보기

25. Int J Plast Sangida 27 801 2011 10.1016/j.ijplas.2010.09.009 The role of grain boundaries on fatigue crack initiation - an energy approach 

    상세보기

26. Int J Fatigue Cavaliere 31 1476 2009 10.1016/j.ijfatigue.2009.05.004 Fatigue properties and crack behaviour of ultra-fine and nanocrystalline pure metals 

    상세보기

27. Int J Fatigue Pokluda 46 35 2013 10.1016/j.ijfatigue.2011.11.016 Dislocation-based model of plasticity and roughness-induced crack closure 

    상세보기

28. Mater Sci Eng, A Pokluda 462 355 2007 10.1016/j.msea.2006.03.154 Analysis of roughness-induced crack closure based on asymmetric crack-wake plasticity and size ratio effect 

    상세보기

29. Mater Sci Eng Davidson 60 225 1983 10.1016/0025-5416(83)90005-8 Mixed-mode crack opening in fatigue 

    상세보기

30. Metall Mater Trans A Ishihara 43 3086 2012 10.1007/s11661-012-1121-9 On the distinction between plasticity- and roughness-induced fatigue crack closure 

    상세보기

31. Fatigue Fract Eng Mater Struct Turnbull 18 1355 1995 10.1111/j.1460-2695.1995.tb00861.x The effect of grain size on fatigue crack growth in an aluminum magnesium alloy 

    상세보기

32. Metall Mater Trans A Garcia 28 2263 1997 10.1007/s11661-997-0184-5 Contact of crack surfaces during fatigue: Part 1. Formulation of the model 

    상세보기

33. Acta Mater Kamp 52 343 2004 10.1016/j.actamat.2003.09.019 Analytical and finite element modelling of roughness induced crack closure 

    상세보기

34. Acta Mater Gall 44 3955 1996 10.1016/S1359-6454(96)00049-3 FEM study of fatigue crack closure under double slip 

    상세보기