참고문헌 (23)

1. Weld. J. - New York Adolfsson 78 59s 1999 On-line quality monitoring in short-circuit gas metal arc welding 

2. Rehfeldt 2003 Proceedings International Forum on Automobile Welding Computer-aided quality assurance (CAQ) of Al-MIG-welding with analysator hanover 

3. Weld. J. Chen 88 99s 2009 Influence of nanoscale marble (calcium carbonate CaCO3) on properties of D600R surfacing electrode 

4. Weld. J. Massimo 89 218s 2010 Seam welding monitoring system based on real-time electrical signal analysis 

5. Weld. J. Heald 38s 1994 Mapping the droplet transfer modes for an ER100S-1 GMAW electrode 

6. J. Achiev. Mater. Manuf. Eng. Luksa 17 1-2 377 2006 Collection of arc welding process data 

7. Sci. Technol. Weld. Join. Li 14 146 2009 10.1179/136217108X370272 Parametric approach to positional fault detection in short arc welding 

   상세보기

8. Strojni？ki vestnik-J. Mech. Eng. Andrej 58 7-8 444 2012 10.5545/sv-jme.2012.341 Online monitoring analysis and remote recording of welding parameters to the welding diary 

   상세보기

9. 10.1109/ICMTMA.2011.856 Bing Xiao, Welding arc signal acquisition and analysis system based on VC++ and MATLAB mixed programming, in: IEEE Proceedings 3rd Third International Conference on Measuring Technology and Mechatronics Automation (ICMTMA), vol. 3, 2011, pp. 1150-1153. 

   

10. Weld. J. Ramirez 89 232-s 2010 Effect of welding parameters and electrode condition on alloying enrichment of weld metal deposited with coated cellulosic electrodes 

11. J. Achiev. Mater. Manuf. Eng. Praveen 96 2009 Arc voltage behavior in GMAW-P under different drop transfer modes 

12. Sci. Technol. Weld. Join. Simpson 12 481 2007 10.1179/174329307X213909 Signature images for arc welding fault detection 

    상세보기

13. Sci. Technol. Weld. Join. Simpson 13 87 2008 10.1179/174329308X271805 Fault identification in gas metal arc welding with signature images 

    상세보기

14. Int. J. Comput. Integr. Manuf. Pal 23 2010 10.1080/09511921003667698 Prediction of the quality of pulsed metal inert gas welding using statistical parameters of arc signals in artificial neural network 

    상세보기

15. Proc. Instrum. Mech. Eng., Part B, J. Eng. Manuf. Wu 218 1145 2004 10.1243/0954405041897121 Intelligent monitoring and recognition of the short-circuiting gas-metal arc welding process 

    상세보기

16. Weld. J. Wu 80 2 16s 2001 A fuzzy logic system for process monitoring and quality evaluation in GMAW 

17. Sci. Technol. Weld. Join. Wu 5 5 324 2000 10.1179/136217100101538380 Gas metal arc welding process monitoring and quality evaluation using neural networks 

    상세보기

18. Sci. Technol. Weld. Join. Pal 13 638 2008 10.1179/174329308X299986 Neurowavelet packet analysis based on current signature for weld joint strength prediction in pulsed metal inert gas welding process 

    상세보기

19. Santhakumari, A. Raja, N. Rajasekaran, P.R. Venkateswaran, Easwaran, Evaluation of Welding Power sourced and Fillers Wires through Signature Analysis. Welding Research Institute, National Welding Seminar, Jamshedpur, 2014-15. 

20. N. Savyasachi, N. Chandrasekhar, S.K. Albert, A.O. Surendranathanc, Evaluation of arc welding process using digital storage oscilloscope and high speed camera, in: International Institute of Welding - International Welding Congress, New Delhi (IC 2014), 2014. pp. 498-503. 

21. Res. J. Appl. Sci. Eng. Technol. Manjula 6 24 4595 2013 10.19026/rjaset.6.3473 Noise reduction in ultrasonic signals for identification of weld defect a review 

    

22. Acta Polytech. Matz 44 4 2004 10.14311/606 Signal-to-noise ratio improvement based on the discrete wavelet transform in ultrasonic defectoscopy 

    상세보기

23. Paul 2004 07-50-30692-0 The Illustrated Wavelet Transform Handbook: Introductory Theory and Applications in Science, Engineering Medicine and Finance