다음과 같은 기능을 한번의 로그인으로 사용 할 수 있습니다.
NTIS 바로가기
Polish journal of chemical technology : a publication of the Permanent Committee of the Polish Congresses on Chemical Technology, v.17 no.4, 2015년, pp.134 - 141
Liszkowska, Joanna (Kazimierz Wielki University, Bydgoszcz, Poland) , Czupryński, Bogusław (Kazimierz Wielki University, Bydgoszcz, Poland) , Paciorek-Sadowska, Joanna (Kazimierz Wielki University, Bydgoszcz, Poland)
AI-Helper
AbstractNew polyols were synthesized with 2-hydroxypropane-1.2.3-tricarboxylic acid and butane-1,4-diol (1.4-BD). The synthesis was performed using different catalysts in the amount of 0.1%. Used catalyst: Tyzor TPT, tin(II) acetate, sulfuric(IV) acid. The fourth reaction was conducted without the u...
editors The polyurethanes book Ltd Randall 2002
New organoboron polyol for the production of rigid polyurethane - polyisocyanurate foams Vol II Preparation of rigid polyurethane - polyisocyanurate foams using a new organoboron polyol in Polish Paciorek 99 Polimery 11 2010 10.14314/polimery.2010.099
structure and thermal conductivity of rigid polyurethane foams blown with cyclopentane in different moulds Prociak 218 Cell Mag 16 2007
Application of waste products from agricultural - food industry for production of rigid polyurethane - polyisocyanurate foams Porous 10.1007/s10934-010-9419-8 Paciorek 631 Mater 18 2011
Effects of unsaturation and different ring - opening methods on the properties of vegetable oil - based polyurethane coatings 10.1016/j.polymer.2014.01.014 Garrison 1004 Polymer 20 2014
The use of epoxidized soybean oil to control the viscosity of the epoxy composition in Polish Czub 11 Polimery 15 2006
From Vegetable Oils to Synthetic Routes to Polyols and Main Industrial Products 10.1080/15583724.2011.640443 Desroches 1 Rev 13 2012
Heat - insulating properties of rigid polyurethane foams synthesized with use of vegetable oils - based polyols Prociak 195 Polimery 17 2008 10.14314/polimery.2008.195
Polyols Prepared from Ring - Opening Epoxidized Soybean Oil by a Castor Oil - Based Fatty Diol Inter Article ID pages http dx doi org on line 529235810.1155/2015/529235() Zhang 2015 Polym Sci 14
Modification of Polymers Status and prospects for Paciorek 129 Mater Tempo 2011
Heat - insulating properties of rigid polyurethane foams synthesized with use of vegetable oils - based polyols Prociak 195 Polimery 17 2008 10.14314/polimery.2008.195
Modification of Polymers Status and prospects for Paciorek 129 Mater Tempo 2011
New organoboron polyol for the production of rigid polyurethane - polyisocyanurate foams Vol II Preparation of rigid polyurethane - polyisocyanurate foams using a new organoboron polyol in Polish Paciorek 99 Polimery 11 2010 10.14314/polimery.2010.099
From Vegetable Oils to Synthetic Routes to Polyols and Main Industrial Products 10.1080/15583724.2011.640443 Desroches 1 Rev 13 2012
structure and thermal conductivity of rigid polyurethane foams blown with cyclopentane in different moulds Prociak 218 Cell Mag 16 2007
systematic study substituting polyether polyol with palm kernel oil based polyester polyol in rigid polyurethane foam Industrial Products http dx doi org 10.1016/j.indcrop.2014.11.053 Septevani 2015 Crops 19
systematic study substituting polyether polyol with palm kernel oil based polyester polyol in rigid polyurethane foam Industrial Products http dx doi org 10.1016/j.indcrop.2014.11.053 Septevani 2015 Crops 19
Studies the effect of boric acid derivatives and dihydroxymethyl urea on the characteristics of rigid polyurethane - polyisocyanurate foams University in Polish Paciorek 1 2011
The use of epoxidized soybean oil to control the viscosity of the epoxy composition in Polish Czub 11 Polimery 15 2006
Effect of hydroxylated soybean oil and bio - based propanediol on the structure and thermal properties of synthesized bio - polyurethanes Industrial Crops Products http dx doi org 10.1016/j.indcrop.2014.06.050 Datta 61 22 2014
Reactions of trithiocyanuric acid with oxiranes IV Analysis of the initial stages of the synthesis of polyetherols 10.1002/app.23608 Chmiel 4917 Appl Polym Sci 2006
Oligomers with structural elements of imidazolidinetrione obtained from oxamic acid and oxamide : polyurethane foams modified by structural elements of imidazolidinetrione Engine 10.1515/polyeng-2013-0318 Zarzyka 2015 24
Glycolysis of PUR waste Purification and use of glycolysis in Polish Datta 627 Polimery 52 2007 10.14314/polimery.2007.627
Effect of hydroxylated soybean oil and bio - based propanediol on the structure and thermal properties of synthesized bio - polyurethanes Industrial Crops Products http dx doi org 10.1016/j.indcrop.2014.06.050 Datta 61 22 2014
polyurethane from lignin and soybean oil through non - isocyanate reactions 10.1016/j.eurpolymj.2014.11.023 Lee 2015 European J 21
Fire - safe polyurethane matherials modified with new flame retardant use of new flammability test methods in Polish Paciorek Chem 12 2012
Fire - safe polyurethane matherials modified with new flame retardant use of new flammability test methods in Polish Paciorek Chem 12 2012
Synthesis and fire properties of rigid polyurethane foams made from a polyol derived from melamine and cardanol Stab http dx org 10.1016/j.polymdegradstab.2014.08.009 Zhang 110 23 2014
Reactions of trithiocyanuric acid with oxiranes IV Analysis of the initial stages of the synthesis of polyetherols 10.1002/app.23608 Chmiel 4917 Appl Polym Sci 2006
Fire - safe polyurethanes modified with new flame retardant Paciorek 297 2012
Oligomers with structural elements of imidazolidinetrione obtained from oxamic acid and oxamide : polyurethane foams modified by structural elements of imidazolidinetrione Engine 10.1515/polyeng-2013-0318 Zarzyka 2015 24
Synthesis and fire properties of rigid polyurethane foams made from a polyol derived from melamine and cardanol Stab http dx org 10.1016/j.polymdegradstab.2014.08.009 Zhang 110 23 2014
Study of Polyurethanes obtained from Bis biphenyl 641010.1023/B:JTAN.0000005201.12216.dd Haponiuk 609 Therm Anal 2003
Study of Polyurethanes obtained from Bis biphenyl 641010.1023/B:JTAN.0000005201.12216.dd Haponiuk 609 Therm Anal 2003
editors The polyurethanes book Ltd Randall 2002
Water Blown Soy Polyol - Based Polyurethane Foams of Different Rigidities 10.1177/0731684407083955 Banik 357 18 2008
Glycolysis of PUR waste Purification and use of glycolysis in Polish Datta 627 Polimery 52 2007 10.14314/polimery.2007.627
Fire - safe polyurethanes modified with new flame retardant Paciorek 297 2012
Application of waste products from agricultural - food industry for production of rigid polyurethane - polyisocyanurate foams Porous 10.1007/s10934-010-9419-8 Paciorek 631 Mater 18 2011
Effects of unsaturation and different ring - opening methods on the properties of vegetable oil - based polyurethane coatings 10.1016/j.polymer.2014.01.014 Garrison 1004 Polymer 20 2014
Water Blown Soy Polyol - Based Polyurethane Foams of Different Rigidities 10.1177/0731684407083955 Banik 357 18 2008
Studies the effect of boric acid derivatives and dihydroxymethyl urea on the characteristics of rigid polyurethane - polyisocyanurate foams University in Polish Paciorek 1 2011
Polyols Prepared from Ring - Opening Epoxidized Soybean Oil by a Castor Oil - Based Fatty Diol Inter Article ID pages http dx doi org on line 529235810.1155/2015/529235() Zhang 2015 Polym Sci 14
polyurethane from lignin and soybean oil through non - isocyanate reactions 10.1016/j.eurpolymj.2014.11.023 Lee 2015 European J 21
*원문 PDF 파일 및 링크정보가 존재하지 않을 경우 KISTI DDS 시스템에서 제공하는 원문복사서비스를 사용할 수 있습니다.
오픈액세스 학술지에 출판된 논문
Copyright KISTI. All Rights Reserved.
※ AI-Helper는 부적절한 답변을 할 수 있습니다.