[논문]Design and analysis of a multi-cell subscale tank for liquid hydrogen storage

Tapeinos, Ilias G.; Koussios, Sotiris; Groves, Roger M.

doi:10.1016/j.ijhydene.2015.10.104

Design and analysis of a multi-cell subscale tank for liquid hydrogen storage 원문보기

International journal of hydrogen energy, v.41 no.5, 2016년, pp.3676 - 3688

Tapeinos, Ilias G. (Structural Integrity & Composites Group, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629HS Delft, Netherlands) , Koussios, Sotiris (Structural Integrity & Composites Group, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629HS Delft, Netherlands) , Groves, Roger M. (Aerospace Non-Destructive Testing Laboratory, Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1, 2629HS Delft, Netherlands)

Abstract ▼ AI-Helper

Abstract This paper outlines the structural performance of a conformable pressurizable tank consisting of intersecting spherical shells (multi-cell tank). Multi-cell tanks outrival conventional multiple cylindrical tanks in volumetric efficiency when required to fit in a rectangular envelope in the automotive industry. When pressurized, the multi-cell (or multi-bubble) tank experiences high stress concentrations at the vicinity of the junctions, and thus the concept of effectively reinforcing those regions without adding significant excess weight becomes crucial. Furthermore, when applied for cryogenic medium storage, the heat transfer between different bodies and the generation of respective thermal stresses in such vessels makes the solution more complicated. In this paper the effect of the i) fiber-reinforced materials at the membrane and ii) unidimensional carbon tows at the intersections on the structural integrity of the tank is analysed for different loading scenarios. An operating window for the proposed tank configuration under the given loading scenario is established indicating the safe zone where the tank can operate. Highlights Introduction of a novel design of a Type IV pressure vessel for the storage of LH2. Study of the heat transfer and thermal stresses between the liner and the tank wall. Establishment of a tank operating window under the given loading scenario. Potential use as guideline for the design of pressure vessels for cryogenics storage.

주제어

참고문헌 (18)

Sippel 2010 Proceedings of the 61st International Astronautical Congress, Prague SpaceLiner rocket-powered high-speed passenger transportation concept evolving in FAST20XX
AIAA J Geuskens 49 1683 2011 10.2514/1.J050822 Analysis of conformable pressure vessels: introducing the multibubble

상세보기
Haaland 463 2000 Proceedings of the U.S. DOE hydrogen program review, California High-pressure conformable hydrogen storage for fuel cell vehicles
Vasiliev 2009 Composite pressure vessels: analysis, design and manufacturing
Ocean Eng Liang 31 177 2004 10.1016/S0029-8018(03)00120-3 Optimum design of multiple intersecting spheres deep-submerged pressure hull

상세보기
Leon 1969 Proceedings of the Offshore Technology Conference, TEXAS Advanced hull design - intersecting titanium spheres
2000 Final report of the X-33 liquid hydrogen tank test investigation
AIAA J Johnson 6 4416 2004 Thermal-structural optimization of integrated cryogenic propellant tank concepts for a reusable launch vehicle
Int J Hydrogen Energy Aceves 23 583 1998 10.1016/S0360-3199(97)00079-7 Insulated pressure vessels for hydrogen storage on vehicles

상세보기
Cryogenics Nast 64 105 2014 10.1016/j.cryogenics.2014.02.014 Multilayer insulation considerations for large propellant tanks

상세보기
Majumdar 2007 Numerical modeling of propellant boiloff in cryogenic storage tank
Sippel 2012 Proceedings of the 18th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, France Advanced hypersonic cryo-tanks research in CHATT
Flugge 1960 Stresses in shells
Peters 2011 Composite filament winding
Adv Heat Trans Raithby 11 265 1975 10.1016/S0065-2717(08)70076-5 A general method of obtaining approximate solutions to laminar and turbulent free convection problems
Noda 2003 Thermal stresses
Ugural 1981 Stresses in plates and shells
Fryer 1998 High pressure vessels

내보내기 구분	파일저장 인쇄 메일전송
구성항목	기본정보 상세정보 관리번호, 논문명, 저널/프로시딩명, 저자 , 발행년, 권, 호, 시작페이지, 끝페이지, 발행기관 관리번호, 논문명, 대등논문명, 저자 , 저널/프로시딩명, 발행기관, 발행년, 발행언어, 권, 호, 시작페이지, 끝페이지, ISBN, ISSN, 주제분야, 키워드, 초록(한글), 초록(영문), 저자(소속기관)
저장형식	Text(ASCII format) Excel format RefWorks Direct Export RIS format (for Reference Manager, ProCite, EndNote), Scholar's Aids, Mendeley
메일정보	받는사람 (필수) @ 보내는사람 (선택) @ 제목 내용 KISTI 검색결과 이메일 서비스
안내	총 건의 자료가 검색되었습니다. 다운받으실 자료의 인덱스를 입력하세요. (1-10,000) 검색결과의 순서대로 최대 10,000건 까지 다운로드가 가능합니다. 데이타가 많을 경우 속도가 느려질 수 있습니다.(최대 2~3분 소요) 다운로드 파일은 UTF-8 형태로 저장됩니다. 파일의 내용이 제대로 보이지 않을실 때는 웹브라우저 상단의 보기 -> 인코딩 -> 자동선택 여부를 확인하십시오. ~ Text(ASCII format) Excel format

연합인증

Design and analysis of a multi-cell subscale tank for liquid hydrogen storage 원문보기

Abstract ▼ AI-Helper

주제어

참고문헌 (18)

이 논문을 인용한 문헌

관련 콘텐츠

원문 보기

원문 URL 링크

오픈액세스(OA) 유형

이 논문과 함께 이용한 콘텐츠

AI-Helper ※ AI-Helper는 오픈소스 모델을 사용합니다.

선택된 텍스트